The digital multimeter MD 9016 is a perfect combination of size, Innovative functions and built-in PC communication. It is capable to detect and diagnose most electrical and electrotechnical problems. Display with large easy-to-read figures and one-handed operation make MD 9016 an extremely easy-to-use. This compact instrument combines a high level of functionality and small size and portability.

TEST FUNCTIONS

AC, DC voltage measurement;
AC, DC current measurement;
Capacitance measurement;
Resistance measurement;
Diode test;
Frequency measurement;
Continuity test (acoustic signaling);
Electric field detection;
Temperature measurement.

TECHNICAL DATA

Dimensions (w x h x l): 80 x 50 x 161 mm

Mass (without accessories): 340 g

Accesorii standard

MD 9016 Standard set

Multimeter MD 9016 with rubber holster
Test lead with probe, 2 pcs
Thermocouple probe, type K
1.5 V battery, type AAA, 2 pcs
Instruction manual
Warranty

Alte produse METREL

MULTIMETRU PORTABIL DE UZ GENERAL METREL MD 9016

• 1000V AC, DC voltage measurement;
• 8A AC, DC current measurement;
• 600O..60MO Resistance measurement;
• 60nF..3mF Capacitance measurement;
• 5Hz..1MHz Frequency Measurement
• Temperature measurement(thermocouple type K included)

MULTIMETRU PORTABIL PENTRU ELECTRICIAN DEPANARI ELECTRICE SI ELETRICITATE METREL MD 9015

• 1000V DC, 750V AC voltage measurement;
• 10A AC, DC current measurement;
• 250O..25MO Resistance measurement;
• 2500nF..25mF Capacitance measurement;
• 30Hz..200kHz Frequency Measurement
• Temperature measurement

MEGOHMMETRU REZISTENTA DE IZOLATIE 1000V METREL MI-2088

• Measurements on earthing and lightning protection systems include: standard 4-wire method, standard 4-wire method with current clamps and 2-clamp method without junctions disassembling.
• Specific earth resistance (soil resistance).
• DC insulation resistance measurement with test voltages from 50 V up to 1000 V in 10 V steps. Measuring range up to 30 GOhm.

TESTER SECURITATE ECHIPAMENTE ELECTRICE CF. STANDARD IEC EN VDE METREL MI 3305 OMEGAGT PLUS

• Continuity tests (200 mA, 4 A, 10 A, 25 A).
• Insulation resistance.
• Substitute leakage current.
• Differential leakage current.
• Touch leakage current.
• IEC cord polarity test.
• Leakage and load TRMS current measurement with current clamp.

MEGOHMMETRU REZISTENTA IZOLATIE 5000V METREL MI-3202 GIGAOHM 5KV

• Five pre-set test voltages: 250V, 500V, 1000V, 2500V and 5000V
• up to 1 T? for insulation resistance
• 600 V for voltage measurements
• Quick setting - Quick & Easy test voltage selection
• Faster testing - 5 mA current source for quick charging of capacitive loads
• Safe - High CAT IV, 600 V voltage protection
• Easy to read - Large, bright LCD display with backlight

TESTER IMPEDANTA LINIE SI BUCLA INTRERUPTA RETEA ELECTRICA LA CURENTI INALTI METREL A 1143 EURO Z 290 A

• High precision line impedance;
• High precision fault loop impedance;
• Contact voltage.
• Range widening: adapts the instruments to read from 0.1 m? up to 19.99 ?.
• Multi-system testing: works on both single phase and 3-phase systems (110 V to 440 V).

MULTIMETRU PORTABIL DE UZ GENERAL METREL MD 9020

• 1000V TRMS AC, DC voltage measurement;
• 10A TRMS AC, DC current measurement;
• 400O..40MO Resistance measurement;
• 500nF..3mF Capacitance measurement;
• 50Hz..1MHz Frequency Measurement

TESTER INSTALATII ELECTRICE 1000V METREL MI 2086 EUROTEST 61557

• DC insulation resistance with test voltages up to 1000V
• PE conductor continuity test
• Loop and Line impedance also without RCD triggering
• RCD test
• Illumination
• Phase sequence in 3-phase systems
• Measurements on earthling and lightning systems with included 2-clamp method (without junctions disassembling).
• Electrical power and consumption measurement,
• current and voltage harmonics measurement,
• phase angle

PLATFORMA SIMULARE INSTALATIE ELECTRICA REZIDENTIALA METREL MI 2166 DEMO

• Simulation of common electrical installation usually met in an individual house or apartment
• Various test methods supported by different test instruments can be presented.
• Acceptable or faulty parameters can be preset by five »fault� switches.
• Some real elements of electrical installation are placed on the front panel like RCD protection device, ON/OFF switch

TESTER INSTALATII ELECTRICE ELECTRICIAN METREL MI 2150 INSTALLCHECK

• Wiring check
• DC insulation resistance
• Continuity test
• Line and Loop resistance
• RCD test
• Phase sequence
• Pass/Fail visual and audio presentation of results