Testere instalatii electrice | MEGGER

• Sunt disponibile doua sau trei tensiuni de test asigur�nd solutia ideala pentru majoritatea aplicatiilor din zona tensiunilor joase
• Masurarea rezistentei de izolatie p�na la 1000 M? pe toate domeniile
• Descarcarea automata ne asigura ca toate circuitele sunt descarcate sigur dupa �ncheierea testelor
• Tensiunea de test a izolatiei de 1000 V are o avertizare de �nalta tensiune �nainte de a aplica tensiunea

 

• The only one that fully tests your instruments to the regs.
• Tests the full range of your tester�s capability not just what�s easy
• Won�t trip RCD protected circuits
• Checks insulation, continuity, loop and RCD functions of testers
• Works with all testers for Part P Certification

 

• 0.01 mA resolution
• EMC and IEC61010-2-032 compliance
• 30 mA, 300 mA, 30 A and 300 A range

 

• Non-trip loop tester
• RCD testing from 10 mA to 1000 mA
• Extremely easy and safe to use
• Built-in protective front cover

 

• High test current up to 1000 A
• Single or three-phased measurements
• Measurement of the net impedance up to the 10th harmonic
• Display of all measured parameters
• Tests in accordance with DIN EN 61557-3; VDE 0413-3

 

• Operates at low voltage
• Battery operated
• Measures voltage up to 30 kV

 

• LED clockwise and counter clockwise phase rotation indication
• Audible indication of direction
• Phase condition LEDs
• Fused test leads

 

• Phase rotation indication for verification of rotating machinery
• 3-phase RCD testing for industrial applications with no earth
• Suite of earths test for electrode resistance measurement
• On-board data storage and Bluetooth® download

 

• Two and three wire non-trip loop testing for RCD protected circuits
• Type-B RCD and 3-phase RCD testing for industrial applications with no Earth
• 3-terminal earth test and stakeless testing for earth electrode resistance measurement **
• Internal memory and Bluetooth® communications

 

• Reverse polarity monitoring and correction on live tests
• Phase rotation indication for verification of rotating machinery
• Auto reversing continuity test of a choice of 200 mA and 15 mA test currents
• On-board data storage and Bluetooth® download

 

• 2000 count digital display
• 1000 V DC / 750 V AC ranges
• 10 A AC / DC ranges
• Resistance, frequency and capacitance ranges

 

• 6000 count backlit digital display
• True RMS reading on a.c. mode
• 1000 V d.c. / 750 V a.c. ranges
• 10 A a.c. / d.c. ranges

 

• PVM210 irradiance meter
• AVO410 CATIV TRMS multimeter
• C4 solar connectors to 4 mm standard plug test leads
• MC3 to MC4 adapter test leads
• PV kit storage pouch

 

• Optimal incident angle and positioning of solar panels
• Measurement of solar power for panel short circuit calculation
• 33/4 digit LCD display with 1999 W/m2 range
• Single handed use

 

• Simple manual or automatic testing
• 230 V and 110 V operation
• Bond testing at 25 A,10 A and 200 mA
• Full colour display

 

• Vast on-board memory to keep you the job longer
• Continuous operation, no need to stop and wait for the tester to cool down
• Instant re-start as you move from room to room testing
• Soft keys to speed you through the testing process

 

• AC / DC voltage from 12 to 690 V
• Continuity
• Phase rotation
• LCD / LED display
• Bright LED torch
• CAT IV 600 V rating

 

• Socket outlets
• Fuses
• Switches
• Wires and cables
• Circuit breakers
• Luminares

 

• Non-contact detection of AC voltage
• Automatic audible warning buzzer
• Bright red voltage indicator in tip
• Ultra bright LED torch

 

• Measures up to 10 TO
• Selectable test voltage from 250 to 5000 V
• PI, DAR, DD test
• Improved productivity – operate from line power/mains if battery dead
•  Li ion battery - extended capacity, rapid charge
• CATIV 600 V safety rating

 

• Measures up to 20 TO
• PI, DAR, DD, SV and ramp test
• Improved productivity – operate from line power/mains if battery dead
• Li ion battery - extended capacity, rapid charge
• Advanced memory with time/date stamp
• CATIV 600 V safety rating

 

• 5 kV insulation resistance tester
• Proven ability to make accurate stable measurements in noisy environments such as 765kV substations
• Rapid charge of capacitive loads such as HV power cables
• Additional safety in high energy locations with remote operation
• always ready to test with fast charge Li-ion battery or a.c. source operation
• Designed to survive harsh environments

 

• 10 kV insulation resistance tester
• Proven ability to make accurate stable measurements in noisy environments such as 765kV substations
• Rapid charge of capacitive loads such as HV power cables
• Additional safety in high energy locations with remote operation
• Always ready to test with fast charge Li-ion battery or a.c. source operation
• Tough enough to survive harsh environments

 

• CATIV 600 V
• High output current 5 mA for fast charging of capacitive loads
• Testing up to 5 kV
• Mains or battery powered
• Digital/analogue backlit display
• Variable test voltage from 50 to 5000 V
• Automatic IR, PI, DAR, SV and DD tests
• Measures to 15 TO
• RS232 and USB download of results

 

• CAT IV 600 V
• Charge current: 5 mA
• 4 mA noise rejection and software filtering
• Mains or battery powered
• Digital/analogue backlit display
• Variable test voltage from 50 to 5000V
• Automatic IR, PI, DAR, SV and DD tests
• Measures to 15 TO
• RS232 and USB download of results to Megger Download Manager
• On board memory for results storage

 

• CAT IV 600 V
• Charge current: 5 mA
• 4 mA noise rejection and software filtering
• Mains or battery powered
• Digital/analogue backlit display
• Variable test voltage from 50 to 10000V
• Automatic IR, PI, DAR, SV and DD tests
• Measures to 35 TO
• RS232 and USB download of results to Megger Download Manager
• On board memory for results storage

 

• Measures up to 30 TO
• PI, DAR, DD, SV and ramp test
• Improved productivity – operate from line power/mains if battery dead
• Li ion battery - extended capacity, rapid charge
• Advanced memory with time/date stamp
• CATIV 600 V safety rating

 

• Proven ability to make accurate stable measurements in noisy environments such as 765kV substations
• Rapid charge of capacitive loads such as HV power cables
• Resistance measurement up to 35 TO with 8 mA noise rejection plus 4 filters
• Additional safety in high energy locations with remote operation
• Always ready to test with fast charge Li-ion battery or a.c. source operation
• Tough enough to survive harsh environments

 

• CATIV 600V applications
• Insulation testing to 1000V and to 200GO
• TRMS & DC Voltage measurement
• Continuity testing at 200mA down to 0.01O
• Analogue and dual digital display
• Insulation & continuity limit alarms
• PI/DAR and Timer function
• Test result storage
• Bluetooth wireless data transfer
• Free calibration certificate included

 

• 10 V and 100 V ESD testing
• 25 V & 50 V signal cable insulation testing
• 250 V & 500 V Insulation testing up to 50 GO (500 V)
• Continuity testing at 200 mA or 20 mA from 0.01 O to 999 kO
• DC and TRMS AC voltage measurement
• Large backlit display
• Combined analogue and dual digital readout
• Weatherproof to IP54
• Supplied with AA alkaline

 

• Variable insulation test voltage from 10 V to 100 V
• Insulation resistance from 2 GO to 20 GO
• Continuity testing at 200mA down to 0.01 O
• TRMS & DC Voltage measurement
• Frequency measurement 40 Hz to 400 Hz

 

• Extremely easy to use
• Tough rubber armoured case
• Self contained protective cover
• Live circuit warning
• Weatherproof to IP54
• Intelligent Safety System for protection.

 

• Two and three wire non trip loop testing for fast repeatable results
• Large bright LCD display showing dual parameters
• loop resistance and fault current
• insulation resistance and test voltage
• Phase rotation indication for verification of rotating machinery
• 3-phase RCD testing for industrial applications with no earth
• 3-terminal earth test for electrode resistance measurement
• On-board data storage and Bluetooth® download

 

• Three kit options available: Insulation, continuity, earth loop, RCD testing
• MTK310: Standard electrical test kit
• MTK320: Advanced electrical test kit
• MTK330: Result storage and downloading test kit
• Rubber armoured instruments
• Weatherproof IP54
• Test leads included
• Calibration certificates included
• 3 year warranty

 

• Simple tick or cross, pass or fail indication plus measurement
• Tough, rubber armoured with built-in front cover, hardened, scratch-proof display window
• Includes 250 V insulation and leakage testing for safe IT testing and surge protected devices
• Testing portable and fixed electrical equipment
• 10 mA and 30 mA portable RCD lead testing (PAT150)
• Adjustable PASS test limits (PAT150)
• Substitute and mains powered leakage testing (PAT150)