Earth Leakage Clampmeter Megger - DCM300E

Cod: Megger - DCM300E


 

Brosura produs PDF, 0.15 Mb
 

Descriere

The DCM300E earth leakage clamp designed primarily to check earth leakage currents with a dedicated 30 mA range providing resolution down to 10 ½A. The capabilities of the DCM300E extend to measuring currents of up to 300 A ac, making it a highly versatile instrument capable of taking current measurements in a wide variety of situations and applications.

 

A typical application for the DCM300E would be the measurement of earth leakage current in a circuit where the RCD or GFCI repeatedly trips out. The measured result will quickly identify whether an excessive leakage current is causing the RCD or GFCI to trip, or if the RCD or GFCI itself is faulty. The DCM300E has 4 ranges: 30 mA, 300 mA, 30 A and 300 A with a best resolution of 0.01 mA. The analog-style bargraph of the DCM300E is very useful when monitoring changes, allowing the operator to easily interpret the rapidly changing bargraph rather than the digital display. Other key functions include the ½Data Hold½ feature which aids in measurements where there is a problem with accessibility or poor lighting, and the automatic power off feature that extends the battery life.

 

This clampmeter was also designed with safety in mind and exceeds the latest safety design standards IEC1010-2-32 and EMC requirements. Extra safety features have been designed into the DCM300E to provide a safer working environment for the user.

 

Features:

  • 0.01 mA resolution
  • EMC and IEC61010-2-032 compliance
  • 30 mA, 300 mA, 30 A and 300 A range
 

Alte produse MEGGER

MEGGER - B10E

• Reliable and stable a.c. and d.c. power supply for circuit breaker testing
• Continuously variable 24-250 V AC or DC output
• Separate outputs for close coil, trip coil and spring charging motor voltage
• Direct triggering for minimum trip voltage testing

 

SARCINA TESTARE DESCARCARE BATERII UPS-URI MEGGER TORKEL 820

• Combines efficiency with portability
• Batteries can be tested "in service"
• Discharge 24 and 48 V batteries at a current of 270 A
• 12 V batteries at 135 A
• Two or more TORKEL 820 units and/or extra load units TXL, can be linked together if you need higher current.

 

MICRO-OHMMETER WITH DUALGROUND SAFETY MEGGER - MJOLNER200

• Safer testing using the patented DualGroundş technology to test circuit breakers with both sides grounded
• Fully automatic testing- microprocessor controlled
• Wide measuring range and test currents
• High powered and light

 

TESTER TDR LOCALIZARE DEFECTE CABLURI MEGGER TDR1000/3

• minimum resolution of 0.1 m and a 5 km maximum range
• Simple operation.
• AUTO set up for instant use.
• Ultra fast pulse for near end fault identification.
• Trace HOLD feature to allow comparison between cables.
• IP54 rating offers real life working.
• Designed for use on all metallic cable pairs.

 

TESTER IZOLATIE COMUNICATII MEGGER MIT480/2 MIT481/2 MIT485/2 500V

• Testarea izolaţiei până la 500 V şi intervalul 100 GΩ într-un instrument portabil
• Conexiune cu 3 fire pentru conexiunea A, B şi E (vârf, inel şi împământare/împământare)
• Acces protejat la 500 V pentru a preveni deteriorarea accidentală
• CAT IV 600 V şi IP 54

 

TRUSA AVANSATA PRIZE DE PAMANT INALTA PRECIZIE SI REZOLUTIE MEGGER DET2/3

• Rezoluție înaltă de 1 mΩ, ideală pentru sisteme de împământare mari
• Moduri de testare versatile
• Precizie ridicată pentru testele de rețea ale electrodului de împământare/masă și rezistivitatea solului
• Baterie reîncărcabilă care poate dura toată ziua cu o reîncărcare rapidă (până la 10 ore)
• Instrument robust cu protecție IP65
• Selectare automată a frecvenței de testare, cu filtre și funcții de curent ridicat

 

TESTER DE IZOLATIE SI CONTINUITATE CU ALARMA MEGGER - MIT200 SERIES

• Sunt disponibile doua sau trei tensiuni de test asigur½nd solutia ideala pentru majoritatea aplicatiilor din zona tensiunilor joase
• Masurarea rezistentei de izolatie p½na la 1000 M? pe toate domeniile
• Descarcarea automata ne asigura ca toate circuitele sunt descarcate sigur dupa ½ncheierea testelor
• Tensiunea de test a izolatiei de 1000 V are o avertizare de ½nalta tensiune ½nainte de a aplica tensiunea

 

MEGOHMETRU IZOLATIE 10000V 10KV MEGGER S1-1068/2

• Rezultate fiabile în substaţii zgomotoase
• Teste precise cu RE>Act™
• Control de la distanţă pentru testare mai sigură şi mai ușoară
• PI Predictor™ reduce timpul de testare la jumătate
• Suită completă de diagnosticare cu capacitate PDC

 

MICROOHMMETRU PORTABIL 300A MEGGER MOM3

• Capacitate mare de curent
• Capabil să genereze până la 300 A, ideal pentru măsurarea rezistenței scăzute în contactele și materialele electrice.
• Include baterie
• Design ușor
• Auto-reglare

 

TESTER IZOLATIE SI CONTINUITATE MEGGER MIT300 MIT310 MIT320 MIT330

• Extrem de ușor de utilizat
• Carcasă rezistentă din cauciuc
• Capac de protecţie autonom
• Avertizare circuit sub tensiune
• Rezistenţă la intemperii conform IP54