Testere instalatii electrice | HT ITALIA

• TRMS
• Interval de măsurare 200Ω
• Rezistență la împământare prin metoda cu 2 și 3 fire
• Rezistență la împământare prin metoda cu 4 fire
• Compensarea tensiunilor perturbatoare
• Compensarea cablurilor de testare
• Măsurarea tensiunii de pas/contact

 

• Instrument multifuncțional pentru testarea siguranței instalațiilor electrice
• analiza calității energiei electrice
• testarea siguranței EVSE
• efectuarea verificării și controlului siguranței stațiilor de încărcare a mașinilor electrice (EVSE) conform standardelor IEC / EN 61851-1 și IEC / EN60364-7-722.

 

• TESTARE SIGURANȚĂ ELECTRICĂ CEI 64-8
• Rezistența la pământ cu metoda Wenner cu 4 fire.
• Teste diferențiale tip A, AC, B, B+, F până la 1A
• Măsurarea și înregistrarea parametrilor electrici
• Tensiuni, Curenți, Puteri, Energii, cosphi, etc.) în sisteme monofazate și trifazate

 

• Măsurători IEC/EN60204-1 si IEC/EN61439-1-2
• Continuitatea circuitului de protecţie cu 200mA
• Continuitatea circuitului de protecţie cu I>10A, V<12V
• Continuitatea circuitului de protecţie cu I>25A, V<12V
• Izolaţie cu tensiuni de testare 100, 250, 500, 1000VDC
• Rigiditate dielectrică cu tensiune programabilă de la 250V la 5100VAC

 

• Insulation Resistance with 250, 500VDC
• Measurement range up to 1GOhm
• Automatic discharging object after test
• Continuity test of protective conductors with 200mA
• DC Voltage
• AC TRMS Voltage

 

• Insulation with test voltage 250, 500, 1000VDC
• Up to 4Gohm measurement range
• Automatic discharge of device under test
• LOCK feature for continuous measurements
• Programmable timer up to 60s
• Continuity of earth conductors with test current of 200mA
• A/DC voltage up to 600V
• Resistance and continuity test with buzzer

 

• Step/Contact voltage with separated units
• Synchronization between units
• Test current up to 50A
• Earth resistance measurement
• Ground resistivity measurement
• Internal memory for saving results
• USB and RS-232 ports for communication between units and PC

 

• HT2051: power unit
• HT2052: voltage unit

 

• Continuity of protection conductors with 12V/>10AAC
• Insulation Resistance with 500VDC test voltage
• Withstanding test with 1000VAC fixed voltage
• Withstanding test with 1000VAC fixed voltage in BURN mode
• Withstanding test with 2500VAC fixed voltage
• Withstanding test with up to 2500VAC in BURN mode
• RS-232 serial interface

 

• Continuity of protection conductors with 12V/>10AAC
• Continuity of protection conductors with 6V/>10AAC
• Insulation Resistance with 500VDC test voltage
• Withstanding test with 1000VAC fixed voltage
• Withstanding test with 1000VAC fixed voltage in BURN mode
• Withstanding test with up to 4000VAC programmable voltage
• Withstanding test with up to 4000VAC programmable voltage in BURN mode
• RS-232 serial interface

 

• Continuity test with 200mA
• Insulation with 50, 100, 250, 500, 1000VDC
• Measure with remote probe (PR400 optional accessory)
• Contextual help at display
• Internal memory
• Optical-USB interface with PC connection

 

• Continuity of earth conductors with <12VAC and >10A test current
• Voltage drop measure
• 4-wire method without test leads calibration
• Recall saved dates at display
• RS-232 serial port for PC connection

 

• Continuity of earth conductors with 200mA
• Continuity of earth conductors with 10A
• Insulation with 250, 500, 1000VDC
• Line / Loop impedance measure P-N, P-P, P-PE with high resolution
• Recall saved data at display
• RS-232 serial interface

 

• Continuity test with 200mA
• Insulation resistance
• Tripping time and current of RCDs type A, AC and selective
• Short circuit loop impedance for PN-PE-PP tests
• Earth resistance with rods
• Phase sequence indication
• Voltage and Frequency measure
• RS-232 output for PC connection

 

• Continuity test of earth conductor with 200mA
• Insulation resistance up to 1000VDC
• Trip-out time of RCDs type A, AC, general and selective
• Global earth resistance without RCD tripping
• 2-wire and 3-wire earth resistance with rods
• Harmonics voltage and current up to 49° order plus THD%
• Voltage anomalies (sags, surges) with 10ms resolution
• RS232 output for PC connection

 

• Continuity test with 200mA
• Insulation with 50, 100, 250, 500, 1000VDC
• Loop Impedance P-P, P-N, P-PE
• Global Earth Resistance without RCD tripping
• Phase sequence indication
• Active, Reactive, Apparent power and power factor on single phase system
• Harmonics voltage/current up the 49th and THD% on single phase system
• Optical-USB interface with PC connection

 

• Continuity on protective conductors PE with 200mA
• Continuity on protective conductors PE with 10A
• Insulation resistance up to 1000V DC
• Earth resistance with 3-wire and 2-wire methods, Ground resistivity with 4-wire method
• TRMS measure and recording of any parameter of Single and Three phase plants
• Harmonic analysis of voltage and current up to the 49th order
• Interface for PC comunication