Tester verificare masini electrice si panouri industriale HT Italia Fulltest4058N
PRODUS OBSOLET ( * SCOS DIN UZ )

• Trasator de curbă I-V pentru întreţinerea şi depanarea sistemelor fotovoltaice.
• Măsurarea curbei I-V a unuia sau mai multor module sau a unui şir întreg până la 1500V/10A
• Măsurarea tensiunii în circuit deschis şi a curentului de scurtcircuit Voc/Isc
• Bază de date cu 30.000 de module fotovoltaice selectabile

 

• Insulation with test voltage 250, 500, 1000VDC
• Up to 4Gohm measurement range
• Automatic discharge of device under test
• LOCK feature for continuous measurements
• Programmable timer up to 60s
• Continuity of earth conductors with test current of 200mA
• A/DC voltage up to 600V
• Resistance and continuity test with buzzer

 

• 3 system types: Single-phase, three-phase 3-wire, three-phase 4-wire.
•  Configurable directly from Smartphone or Tablet.
•  Fast trips and detailed zoom of all sizes.
•  Real Time.
•  Energy consumption logger.
•  383 parameters can be displayed simultaneously.
•  Technology and absolute simplicity.
•  Harmonics Jump function.

 

• ContiDC Voltage
• AC TRMS Voltage
• nuity test of protective conductors with 200mA
• Insulation Resistance with 250, 500VDC
• Trip-out time of RCDs type AC Standard
• Test current selectable; 30mA, 30x5mA, 100mA, 300mA
• Global Earth Resistance without RCD tripping
• Global Earth Resistance with 0.1Ohm resolution

 

• 3-wire Earth Resistance
• 2-wire Earth Resistance
• Measurement range up to 50kOhm
• Calibration of test cables
• Automatic regulation of noise voltage disturbances

 

• Măsurători IEC/EN60204-1 si IEC/EN61439-1-2
• Continuitatea circuitului de protecţie cu 200mA
• Continuitatea circuitului de protecţie cu I>10A, V<12V
• Continuitatea circuitului de protecţie cu I>25A, V<12V
• Izolaţie cu tensiuni de testare 100, 250, 500, 1000VDC
• Rigiditate dielectrică cu tensiune programabilă de la 250V la 5100VAC

 

• Step/Contact voltage with separated units
• Synchronization between units
• Test current up to 50A
• Earth resistance measurement
• Ground resistivity measurement
• Internal memory for saving results
• USB and RS-232 ports for communication between units and PC

 

• Measuring range 25-140dB
• "Peak", "Fast", "Slow" and "Impulse" integrations
• "A", "C" and "Z (linear)" frequency weighting
• "Peak+" and "Peak-" measurement in C weighting
• Spectral analysis with octave and 1/3 octave digital filter (HT157)
• Class 1 portable calibrator
• Mini-USB output for connection to PC

 

• TRMS AC Voltage measure up to 600V
• Recording with sampling programmable period
• Manual activation of recording
• RS-232 interface
• Programming with DATALINK software

 

• Generation of output voltage signal with amplitude up to 10VDC
• Voltage measurement up to 10VDC
• Generation of output current signal with amplitude up to 24mADC
• Current measurement up to 24mAVDC
• Current measurement in percentage format (4-20mA)
• Loop current measurement of external transducers