The HT2055 model is composed by a station unit and a meter unit in way to perform step/contact voltage measurements on electrical installations (typical HV power station) with nominal test current up to 50A according to the international guidelines. Both units, initially synchronized in time and current, can perform an exact calculation of step and contact voltage applying the real test current measured by the station unit. A internal DSP filtering also perform the automatically compensation of the noise voltage disturb on the earth system. The instrument permits also the earth resistance measurement with 3-wire method and the ground resistivity with 4-wire Wenner method. All results can be saved inside internal memory of the meter unit and download to PC with supplied Windows dedicated software

STANDARD

CE mark
EN 61010-1
LVD Directive 2006/95/EEC
EMC Directive 2004/108/EEC

FUNCTION

Step/Contact voltage with separated units
Synchronization between units
Test current up to 50A
LCD dot matrix display on both units
Earth resistance measurement
Ground resistivity measurement
Internal memory for saving results
USB and RS-232 ports for communication between units and PC
DSP filtering for compensation noise disturb
Dedicated Windows software

Accesorii standard

Included accessories:

Station unit HT2055S
Meter unit HT2055M
Power cord for HT2055S unit
Metal current probe, 1m length
Metal voltage probe, 60cm length
Metal plate (200x100mm), 2 pcs
Test cable black, 50m, 10mmq, with alligator clip, with industrial plug, on wheel
Test cable black, 10m, 10mmq, with alligator clip, with industrial plug
Test cable red, 50m, on wheel
Test cable green, 10m, with alligator clip, on wheel
Test cable red, 1m, with alligator clip
Test cable black, 1.5m
Test cable black, with plug for HT2055M, 2x3m
Alligator clip black, 4 pcs
6 x 1.2V rechargeable batteries NiMH type AA, LR03
External adapter 100-240V AC / 12V DC
USB cable
RS-232 - PS/2 cable
"TeraView" software on CD-ROM
Soft carrying bag, 2 pcs
Belt for use of HT2055M unit on neck
User manual
ISO9000 calibration certificates
Wood carrying case

Optiuni recomandate

Optional accessories:

Metal current probe, 1m length
Metal voltage probe, 60cm length

Alte produse HT ITALIA

PV-ISOTEST TESTER SECURITATE ELECTRICA PANOURI SOLARE CU FUNCTIE DETECTIE PANOU DEFECT

• Insulation measurement up to 1,500V DC even on live systems
• Localization of the faulty module through the new GFL function
• Continuity of the protective conductor with 200mA

GSC60 TESTER MULTIFUNCTIONAL INSTALATII ELECTRICE CU ANALIZA CALITATE PUTERE

• TESTARE SIGURANȚĂ ELECTRICĂ CEI 64-8
• Rezistența la pământ cu metoda Wenner cu 4 fire.
• Teste diferențiale tip A, AC, B, B+, F până la 1A
• Măsurarea și înregistrarea parametrilor electrici
• Tensiuni, Curenți, Puteri, Energii, cosphi, etc.) în sisteme monofazate și trifazate

CLESTI DE CURENT AMPERMETRICI PORTABILI HT ITALIA

• DC/AC/AC+DC TRMS current
• DC/AC/Ac+DC TRMS Voltage
• Peak of AC current and AC voltage

MULTIMETRU PORTABIL MASURA REZISTENTA DE IMPAMANTARE HT ITALIA M73

• Trip out time measure on AC Standard RCD's
• Trip out current: 30, 30x5, 100, 300mA
• Global Earth Resistance with 0.1Ohm resolution
• Global Earth Resistance without RCD's tripping
• DC Voltage
• AC TRMS Voltage
• Automatic detection of AC/DC signals

MACROEVTEST TESTER MULTIFUNCTIONAL CU ANALIZA PUTERE SI TESTARE STATII INCARCARE VEHICULE ELECTRICE EVSE

• Instrument multifuncțional pentru testarea siguranței instalațiilor electrice
• analiza calității energiei electrice
• testarea siguranței EVSE
• efectuarea verificării și controlului siguranței stațiilor de încărcare a mașinilor electrice (EVSE) conform standardelor IEC / EN 61851-1 și IEC / EN60364-7-722.

INREGISTRATOR CURENTI RETEA ELECTRICA MONO/ TRI-FAZICA HT ITALIA XL421/ XL422

• TRMS AC current measure up to 2500A
• Recording with sampling programmable period
• Manual activation of recording
• RS-232 interface
• Programming with DATALINK software

ANALIZOR CALITATE PUTERE SI ENERGIE DE CLASA-S PQA924

• Tensiune alternativă în sisteme monofazate şi trifazate
• Curent alternativ în sisteme monofazate şi trifazate
• Cosphi, factor de putere, factor K
• Dezechilibru de tensiune
• Pâlpâire
• Putere/energie activă, reactivă şi aparentă
• Amplitudine şi fază armonice de tensiune şi curent până la ordinul 63 cu calcul THD%

FULLTEST3 TESTER MULTIFUNCTIONAL SIGURANTA MASINILOR IEC/EN60204-1 SI TABLOURI DISTRIBUTIE JOASA TENSIUNE IEC/EN61439-1-2

• Măsurători IEC/EN60204-1 si IEC/EN61439-1-2
• Continuitatea circuitului de protecţie cu 200mA
• Continuitatea circuitului de protecţie cu I>10A, V<12V
• Continuitatea circuitului de protecţie cu I>25A, V<12V
• Izolaţie cu tensiuni de testare 100, 250, 500, 1000VDC
• Rigiditate dielectrică cu tensiune programabilă de la 250V la 5100VAC

PVCHECKS-PRO TESTER INSTALATII FOTO-VOLTAICE 1500V / 40A

• Continuitatea conductorilor de protecție cu 200mA
• Polaritate
• Tensiunea în circuit deschis Voc a modulelor fotovoltaice și a șirurilor 1500V
• Curent de scurtcircuit Isc pe modulele fotovoltaice și șiruri 40A
• Izolație șir/câmp fotovoltaic cu tensiune de testare 250, 500, 1000, 1500VD

MEGOHMMETRU IZOLATIE SI CONTINUITATE CU MULTIMETRU DIGITAL HT ITALIA M72

• Insulation Resistance with 250, 500VDC
• Measurement range up to 1GOhm
• Automatic discharging object after test
• Continuity test of protective conductors with 200mA
• DC Voltage
• AC TRMS Voltage