Testare EMC si EMI | TEKBOX

• Analizor de reţea vectorial 0,1 Hz "" 6 GHz
• Analizor Bode 0,001 Hz "" 500 MHz (necesită opţiunea hardware Bode)
• Generator de semnal 0,1 Hz "" 6 GHz cu rezoluţie de 0,1 Hz
• Osciloscop digital cu patru canale, 60 MHz, cu 125 MS/s şi rezoluţie de 14 biţi. (Două intrări de 50 Ω, două intrări de 1 MΩ)
• Analizor de spectru cu două canale DC "" 6 GHz

 

• Analizor EMI 1 Hz "" 110 MHz (Receptor de măsurare)
• Analizor de zgomot 1 Hz "" 110 MHz
• Analizor de armonice de reţea
• Osciloscop 250 MS/s, DC "" 110 MHz
• Generator de flux IQ

 

• Slim design for good access in between tightly spaced components
• Shielded loops to avoid picking up common mode noise; insensitive to the human hand
• Frequency range: up to 6GHz, see coupling plots of the respective probes
• SMB connectors to avoid twisting the RF cable when scanning DUTs

 

• Pre-compliance RF immunity testing, driving Tekbox EMC probes or TEM cells
• RF driver amplifier
• General purpose wideband RF amplifier

 

• RF driver amplifier
• General purpose wideband RF amplifier

 

• General purpose gain block
• Pre-amplifier in applications with low noise and high IP3 requirements
• Pre-amplifier for spectrum analyzers, especially in EMC pre-compliance test applications
• Loop antenna amplifier

 

• EMC probe amplifier
• General purpose wideband RF amplifier

 

• Outer dimensions: 120 cm x 60 cm x 60 cm
• Opening dimensions: 85 cm x 35 cm
• Frame: 20 mm x 20mm extruded aluminium profiles
• Shielding: 2 layers of conductive fabrics
• Seal: conductive Velcro tape

 

• All TEM cells are supplied together with a 50O/25W RF termination, a DC block to protect the spectrum analyzer or RF receiver input and a N-Male to N-Male coaxial cable.

 

• Operating voltage range: 2V ½ 70V
• Maximum current: 10A
• Power rating: max. 25W continuously; with additional fan 100W continuously
• Ranges: 0A ½ 1A, 0A ½ 10A, 1O ½ 10O, 10O ½ 100O
• External voltage control input

 

• Frequency range: 9 kHz ½ 600 MHz
• Attenuation: 10 dB ½ 0.5/+1.2 dB in-band (9 kHz to 600 MHz)
• Attenuation HP-filter: > 30 dB @ 2kHz
• Maximum continuous RF input power: 5W (+37 dBm) in-band

 

• Air core inductors
• Line voltage: max. 240V / 50 ½ 60 Hz, CAT ?
• Max. current: 8A @ 23°C
• DUT socket: country specific

 

• Frequency range: 30 kHz ½ 110 MHz
• Maximum RF level at any BNC port: 27dBm
• Maximum DC current at any BNC port: 30 mA

 

• Frequency range: 100kHz ½ 110MHz (1GHz, see figure 4 in the manual)
• DC Resistance: 40 mO
• Maximum current: 10A
• Nominal operating voltage range: 0 ½ 60V DC *