Multifunction Installation Testers Megger - MFT1731, MFT1721 and MFT1711

Cod: Megger - MFT1731, MFT1721 and MFT1711


 

Brosura produs PDF, 0.28 Mb
   

Descriere

This latest series of multifunction installation tester adds one to the nomenclature and vastly to the value of these testers. The range of 3 instruments are expressly for testing low voltage electrical installations to BS7671. They provide all the tests required to complete the necessary electrical certification for industrial, commercial and domestic fixed wiring installations.

 

MFT1711 - The entry level 17th Edition tester offering CAT IV, 3 and 2-wire non trip loop testing with resistance and fault current display,frequency measurement and the largest, brightest and clearest display on the market.

 

This now adds a 1 kV insulation test range, Auto RCD tests, 10 mA RCD, programmable (VAR) RCD, ZMAX and true RMS voltage measurement.

 

MFT1721 - The most popular of the range of 17th Edition testers offering all the benefits of the MFT1710, including auto RCD testing and adding phase rotation, 3-phase RCD testing and current measurement with the optional clamp.

 

This now adds an additional 100V insulation test range, true RMS voltage measurement, mV sensor input and Type B RCD testing.

 

MFT1731 - The most sophisticated of the 17th Edition testers brings Type B RCD testing, 3-pole earth electrode testing to a downloading and rechargeable instrument.  

 

Additional benefits are that is supplied in a large soft, carry case with sufficient space for the tester, test leads and some tools. The MFT1731 has enabled additional earth electrode testing options such as 3-pole ART electrode testing and stakeless electrode testing. The clamps are optional accessories.

 

Features:

  • Two and three wire non trip loop testing for fast repeatable results
  • Large bright LCD display showing dual parameters - loop resistance and fault current, insulation resistance and test voltage
  • Phase rotation indication for verification of rotating machinery
  • 3-phase RCD testing for industrial applications with no earth
  • Suite of earths test for electrode resistance measurement
  • On-board data storage and Bluetooth® download

 

 

Alte produse MEGGER

STATIC / DYNAMIC RESISTANCE MEASUREMENT ACCESSORY FOR EGIL MEGGER - SDRM201

• Enables resistance measurement on circuit breakers
• Small and light weight
• A number of operations can be run with short waiting intervals

 

ANALIZOR TRIFAZAT CALITATE ENERGIE SI PUTERE CLASA A MEGGER MPQ2000

• Alimentat de la tensiunea fazei A AC/DC
• Rezistent la intemperii conform standardului IP54 pentru utilizare în orice mediu
• Interval 1000 VAC şi 1500 VDC
• Auto CT identifică curentul la care este conectat instrumentul şi intervalul în care se află
• Oscilloscop şi DVM în timp real
• Conformitate IEC61000-4-30 Clasa A

 

TESTER DE RELEE CONFORM IEC 61850 MEGGER GOOSER

• Reliable testing of IEC61850 relays using a conventional relay test set
• Separate Ethernet ports for the substation LAN and the controlling PC forming a Safe Substation Bus Access Point
• Seamless interaction between SCL GOOSE and GOOSE "sniffing"
• GOOSE merge - SCL GOOSE vs captured GOOSE for network troubleshooting and SCD file validation at FAT
• Stand alone functionality - Download a configuration and run

 

BOND TESTER MEGGER - BT51

• High test current
• Four terminal measurement
• Two measuring ranges (2000 mO. and 20,00 mO.)and maximum resolution of 0,01 mO.
• Protected against inadvertent connection to the mains supply

 

TRUSA TRIFAZATA MASURA RAPORTULUI DE TRANSFORMARE MEGGER TTRU3

• Precizie garantată ±0,05% de la -20°C la +50°C
• Tensiune de testare 3Ø - până la 250V
• Raport de creștere a tensiunii 3Ø (patentat)
• Transformatoare defazate și zig-zag testate
• ușor și precis
• Cel mai mic/ușor set de testare 3Ø de pe piață
• Teste rapide 3Ø - mai puțin de 10 secunde

 

MEGOHMETRU IZOLATIE 5000V 5KV MEGGER S1-568/2

• Rezultate fiabile în substaţii zgomotoase
• Teste precise cu RE>Act™
• Control de la distanţă pentru testare mai sigură şi mai ușoară
• PI Predictor™ reduce timpul de testare la jumătate
• Suită completă de diagnosticare cu capacitate PDC

 

TESTER TDR LOCALIZARE DEFECTE CABLURI MEGGER TDR1000/3

• minimum resolution of 0.1 m and a 5 km maximum range
• Simple operation.
• AUTO set up for instant use.
• Ultra fast pulse for near end fault identification.
• Trace HOLD feature to allow comparison between cables.
• IP54 rating offers real life working.
• Designed for use on all metallic cable pairs.

 

SARCINA TESTARE DESCARCARE BATERII UPS-URI MEGGER TORKEL-840 TORKEL-860 BS-49094 BS-49096

• used for battery systems ranging from 12 to 250 V
• Batteries can be tested "in service"
• Unit adjusts to include load currents in the test parameters
• User adjustable alarm and shutdown points to avoid excessive discharge
• Easily expandable for larger battery banks using TXL extra load units (option)
• Computerized test operation using TorkelWin software (option)

 

TESTER TRIFAZAT RAPORT TRANSFORMARE TRANSFORMATOARE MEGGER TTR300

• Stand-alone or remote-control operation
• Accurately measures ratio, phase deviation and excitation current
• Field upgradeable without compromise to calibration
• Built-in capability for storing and downloading test results in an XML format, via RS-232, Ethernet or USB ports (depending on model)
• Works in the presence of high interference/high voltage
• Highest ratio measurement (45,000:1); highest accuracy (0.1%)
• Displays % error vs. name plate with pass/fail limits

 

LOCATOR TRASEU CABLURI MEGGER VLOC3-PRO

• Afişarea permanentă a adâncimii şi curentului Moduri de afişare multiple (clasic, vector, plan, transversal, sondă, alerte)
• Afişaj color LCD de mari dimensiuni cu senzor pentru iluminare automată
• Domeniu mare de frecvenţe pentru o localizare optimă în orice condiţii
• Ceas real de timp pentru certificarea localizării