This powerful test system is designed for primary injection testing of protective relay equipment and circuit breakers. It is also used to test the turns ratio of current transformers and for other applications that require high variable currents.

The system consists of a control unit and a current unit. The two parts are portable, and INGVAR can be quickly assembled and connected.

The control unit has many advanced features ½ a powerful measurement section for example, that can display turns ratio as well as time, voltage and current. A second measurement channel can be used to test an additional current or voltage. Current transformer turns ratio, impedance, power, power factor (cos f) and phase angle are calculated and shown in the display. Current and voltage can be presented as percentages of nominal value. The fast-acting hold function freezes short-duration readings on the digital display when the voltage or contact signal arrives at the stop input, the object under test interrupts the current or injection is stopped.

Features:

Most advanced primary current injection test system to simplify all types of switchgear and CT commissioning, ground grid, circuit breaker testing and more
Up to 5000 A output current
Two units, each of about 20 kg, makes it easier to carry
Unique I/30 function allows the current to be pre-set using low current to prevent test sample heating, thus eliminating corruption of test result

Alte produse MEGGER

MICROOHMETRU 600A MEGGER DLRO600

• Small and weighs less than 33 lbs (15 kg)
• Test currents from 10 A to 600 A dc
• 0.1 µohms best resolution
• On board memory for up to 300 test results and notes
• RS232 port to download stored results or for real time output to a printer
• Supplied complete with 16.4 ft (5 m) test leads and download software

TESTER IZOLATIE SI CONTINUITATE MEGGER MIT200 MIT210 MIT220 MIT230

• Testoare de izolaţie şi continuitate de buzunar - MIT210, MIT220, MIT230
• Testarea izolaţiei până la 1000 MΩ
• Testarea continuităţii la 200 mA până la 0,01 Ω
• Avertizare circuit sub tensiune (afișaj tensiune) şi blocare test
• Afișaj digital/analogic

EARTH LEAKAGE CLAMPMETER MEGGER - DCM300E

• 0.01 mA resolution
• EMC and IEC61010-2-032 compliance
• 30 mA, 300 mA, 30 A and 300 A range

ANALIZOR DIAGNOZA IZOLATIE SI PIERDERI ULEI ELECTROIZOLANT MEGGER IDAX-300 IDAX-350

• Automated measurement and analysis of moisture content, tan delta/power factor and oil conductivity
• Individual temperature correction (ITC) of tan delta/power factor and oil conductivity
• 40% faster measurements with the new IDAX 5.0 SW
• Reliable measurements in high-interference environments
• Multi-function test set for transformer measurements

REFLECTOMETRU LOCALIZARE DEFECTE CABLU MEGGER TDR1000/3P

• TDR1000/3P is suitable for use on both dead or live cables
• Simple operation
• AUTO set up for instant use
• Ultra fast pulse for near end fault identification
• Trace HOLD feature to allow comparison between cables
• IP54 rating offers real life working
• No blocking filters require
• Supplied with fused test leads

PHOTOVOLTAIC KIT MEGGER - PVK320

• PVM210 irradiance meter
• AVO410 CATIV TRMS multimeter
• C4 solar connectors to 4 mm standard plug test leads
• MC3 to MC4 adapter test leads
• PV kit storage pouch

TESTER DE TENSIUNE VOLTMETRU ELECTRICIAN MEGGER TPT420 CATIV 1000V

• CAT IV/1000 V
• Clasificare IP64
• 12 până la 1000 V AC
• 12 până la 1500 V DC
• Funcție de testare a continuității cu indicație vizuală și acustică
• Indicare tensiune fără baterii
• Test de tensiune unipolar
• Indicare rotație fază
• Lanterna integrată

FORK MULTIMETER MEGGER - DCM330

• 200.0 A a.c. open-jaw current measurement
• 0.1 V to 1000 V auto-ranging a.c. and d.c. voltage measurement
• 0.1 O to 20.00 MO resistance range
• Continuity buzzer

MEGOHMMETRU REZISTENTA IZOLATIE 5KV MEGGER MIT515/2

• Mod RE>Act precizie şi siguranţă îmbunătăţite
• Funcţie de predicţie PI (PIp)
• Măsoară până la 20 TΩ
• Rejecţie a zgomotului de până la 3 mA

SMART PRIMARY INJECTION TEST SYSTEM MEGGER SPI225

• Up to 2000A output
• Smallest primary injection test system in its class
• First unit on the market to eliminate variac control
• Output current regulation
• Designed for switchgear commissioning, circuit breaker, CT commissioning, ground grid and relay testing
• Software includes thousands of circuit breaker TCC curves