Trusa masura tangenta unghi de pierderi tangeta delta Megger DELTA4310

Cod: Megger DELTA4310 DELTA-4310


 

Brosura produs PDF, 0.71 Mb
   

Descriere

• Power factor test set
• Automatic and manual operation
• Accurate and repeatable measurement results with high noise suppression
• Lightweight, rugged two-piece design
• New built-in intelligent temperature correction
• New automatic voltage dependence detection

 
 
  • Voltage: 25 V to 12 kV, 1 V resolution
  • Current : 0 to 5 Amps, 0.1 µA maximum resolution
  • Capacitance: 0 to 100 µF, 0.01 pF maximum resolution
  • Inductance: 6 H to 10 MH, 0.1 mH maximum resolution
  • Power factor PF : 0-100% (0-1), 0.001% maximum resolution
  • Dissipation factor DF : 0-100 (0-10,000%), 0.001% maximum resolution
  • Watt Loss: 0 to 2 kW, actual power, 0 to 100 kW when corrected to 10 kV
  • equivalent, 0.1 mW maximum resolution
 

DELTA4000 series is a fully automatic 12 kV insulation power factor / dissipation factor (tan delta) test set designed for condition assessment of electrical insulation in high voltage apparatus such as transformers, bushings, circuit breakers, cables, lightning arresters, and rotating machinery.

Two configurations make up the Series:

• DELTA4110 with external computer (not included) consists of the DELTA4100 control unit and DELTA4010 high-voltage unit

• DELTA4310 comes with onboard computer and consists of DELTA4300 control unit and DELTA4010 high-voltage unit

 

Accesorii standard

DELTA4110 Insulation Diagnostic System

(DELTA4100 control unit and DELTA4010 HV unit) DELTA4110

 

DELTA4310 Insulation Diagnostic System with onboard computer

(DELTA4300 control unit and DELTA4010 HV unit) DELTA4310

 

Included Accessories

High voltage lead: 21 m (70 ft), double shielded 30012-11

Measurement lead, color-coded red 25572-1

Measurement lead, color-coded blue 25572-2

Ground lead: 9 m (30 ft) 2002-131

Input power cable 25A EU 17032-23

Input power cable 16A US 17032-20

Input power cable 16A UK 17032-21

Input power cable 16A no plug 17032-22

Safety hand switch, Interlock #1: 18 m (60 ft) 1001-850

Safety hand switch, Interlock #2: 2.5 m (8 ft) 1001-851

HV unit power cable, 1 m (3 ft) 2002-132

HV unit control cable, 1 m (3 ft) 2002-133

Ground lead cable, 1 m (3 ft) 2002-134

USB cable, 2 m (7 ft) CA-USB

Ethernet cable, CAT 5, 2 m (7 ft) 36798

Soft padded carrying case for control unit [1] 2001-766

Soft padded carrying case for HV unit [1] 2001-766

Soft case for HV cable 2001-507

Soft case for other cables/accessories 2001-506

User manual 81331

Application guide 81332

Warranty [1 year]

PowerDB Advanced software

 

 

Optiuni recomandate

Optional Software

PowerDB Pro software, on USB dongle DB1001S-A

PowerDB Pro software, via soft key DB1001-A

 

Extended Warranty and Annual Support

Priority Access annual support plan D4K-P-ACCESS

Product warranty Y12-WARRANTY

Training D4K-TRAINING

PowerDB software

maintenance and upgrades D4K-SOFTWARE

24/7 technical support D4K-TECHSUPPORT

Engineering consulting and

results analysis D4K-ENGCONSULT

Loaner unit and accessories D4K-LOANER

 

 

Optional Accessories

Safety foot switch 1001-852

External strobe Y37181

External strobe extension cable, 18 m (60 ft) 1001-853

Transport case, 2-piece design kit, consists of: 1001-932

case for control unit and accessories (2001-746),

case for HV unit and accessories (2001-746)

Transport case, 3-piece design kit, consists of: 1001-933

case for control unit (2001-791),

case for HV unit (2001-791),

case for accessories ( 2001-792)

Transport cart / trolley 1001-530

Calibration box set for CAL4000 2002-137

Calibration standard 670500-1

Transit cases for calibration standard 670635

HV TTR capacitor, single phase (10 nF, 10 kV) 36610

HV reference capacitor (100 pF, 10 kV) 36610-1

HV reference capacitor (1000 pF, 10 kV) 36610-2

Carry case for capacitors 36610-CC

Capacitor kit (TTR cap, 2 ref caps, carry case) 36610-KIT2

Resonating inductor 670600-1

Thermal Pentax® printer, 120 V 36493-1

Thermal Pentax® printer, 240 V 36494-1-KIT

Thermal paper (8.5" x 11") for printer 36809-1

Thermal paper (A4) for printer 36809-2

Oil test cell 670511

Hot collar belts [3] 670505

Bushing tap connectors [2] 670506

External temperature and humidity probes 2002-138

USB bar code wand and software 36528

 

Accessory kit: hot collar straps [3], external temperature

and humidity meters, .75" bushing tap connector [1],

1" bushing tap connector [1], mini bushing tap

connectors [2], "J" probe bushing tap connector [1],

1 m (3 ft) non-insulating shorting lead [3],

2 m (6 ft) non-insulating shorting lead [3] 670501

Special length cables available upon request Consult factory

 

Additional Transformer Test Products

Leakage Reactance MLR

Turns Ratio, 3-phase TTR

Winding Resistance MTO

Sweep Frequency Response Analysis (SFRA) FRAX

Dielectric Frequency Response (DFR) and

moisture assessment IDAX

DC Insulation MIT/S1

Current Transformer Measurements MCT

 

Alte produse MEGGER

TESTER MULTIFUNCTIONAL INSTALATII ELECTRICE JOASA TENSIUNE MEGGER MFT-X1

• Testează True Loop™ cu brevetatul Confidence Meter™
• Transferul rezultatelor prin Bluetooth® compatibil cu CertSuite™
• Noua generaţie a metodei de test a buclei fără declanșare, cu 2 şi 3 fire
• Sistem de operare actualizabil de către utilizator
• Test de buclă de înaltă rezoluţie de 0,001Ω

 

CURRENT SUPPLY UNIT MEGGER ½ CSU600A AND CSU600AT

• Compact and rugged
• Quick and easy to us
• Broad application range
• Excellent weight/performance ratio

 

COMBINED LOOP AND RCD TESTERS MEGGER - LRCD210 AND LRCD220

• Non-trip loop tester
• RCD testing from 10 mA to 1000 mA
• Extremely easy and safe to use
• Built-in protective front cover

 

MICRO-OHMMETER MEGGER - MOM200A

• Easy to operate
• Designed for rugged field use
• Highly flexible cable connections
• Portable and lightweight, weighs only 14 kg (31 lbs)

 

PRIMARY CURRENT INJECTION TEST SYSTEM MEGGER INGVAR

• Most advanced primary current injection test system to simplify all types of switchgear and CT commissioning, ground grid, circuit breaker testing and more
• Up to 5000 A output current
• Two units, each of about 20 kg, makes it easier to carry
• Unique I/30 function allows the current to be pre-set using low current to prevent test sample heating, thus eliminating corruption of test result

 

TRUSA TESTARE TRANSFORMATOARE SI STATII TRANSFORMARE CAPACITATE FACTOR DE PUTERE SI DISIPATIE MEGGER TRAX

• Înlocuiește nevoia mai multor seturi de testare
• Sistem puternic, portabil și compact
• Reduce timpul de instruire a utilizatorilor și de testare
• Extinde durata de viață a transformatoarelor de putere
• Testarea stării izolației la 1 Hz
• Gestionează și analizează datele de testare

 

MEGOHMETRU REZISTENTA IZOLATIE 15KV MEGGER MIT1525/2

• Testare diagnostică cu suită completă de teste
• PI Predictor™ reduce timpul de testare la jumătate
• Testare precisă cu RE>Act™
• Stocare încorporată şi export ușor de date
• Conceput pentru testare sigură pe teren

 

TRUSA CURENT-TENSIUNE PENTRU VERIFICAREA RELEELOR DE PROTECTIE MEGGER FREJA 300

• can generate 4x150 V (82 VA) and 3x15 A (87 VA) or 1x45 A (250 VA).
• Manual and automatic control
• Easy to use
• Excellent software provides great visuals and simple setup
• Lightweight and portable
• Highly accurate
• User can calibrate unit

 

SARCINA TESTARE DESCARCARE BATERII UPS-URI MEGGER TORKEL 820

• Combines efficiency with portability
• Batteries can be tested "in service"
• Discharge 24 and 48 V batteries at a current of 270 A
• 12 V batteries at 135 A
• Two or more TORKEL 820 units and/or extra load units TXL, can be linked together if you need higher current.

 

DIGITAL CLAMP METER MEGGER - DCM310 AND DCM320

• Option of current only , DCM310 or multimeter, DCM320 models
• Measures up to 400 A a.c. with low current ranges for improved resolution
• 600 V a.c./d.c. DCM320
• 20 MO Resistance DCM320