The SDRM201 is intended to use for both static and dynamic resistance measurements (SRM and DRM) on high voltage circuit breakers or other low resistive devices. Used together with EGIL the current and also the voltage-drop across the circuit breaker contacts are measured. The measuring unit can thus calculate the resistance as a function of time.

A system consists of an SDRM201 unit with current cables and an SDRM Cable The SDRM Cable is a small box with integrated cables for connection to the SDRM201 and to EGIL.

Features:

Enables resistance measurement on circuit breakers
Small and light weight
A number of operations can be run with short waiting intervals

Alte produse MEGGER

TESTER RELEE DE PROTECTIE TRIFAZATE MEGGER SMRT33

• Small, rugged, lightweight and powerful
• Operate with or without a computer
• Intuitive manual operation with Smart Touch View Interface
• High current, high power output - (45 Amps/300 VA rms) per phase
• Network interface provides IEC 61850 test capabilities
• Fully automated testing using AVTS software

SINGLE PHASE HAND CRANKED TRANSFORMER TURNS RATIO TESTER MEGGER - TTR550005B

• Used for testing single phase power and distribution transformers
• Design based on precision bridge measuring technique
• Unmatched accuracy (�0.1%) in a portable design

CIRCUIT BREAKER TEST SET MEGGER � CB-845

• Digital memory ammeter
• Digital, multirange timer
• Lightweight and portable
• High-current output
• Solid-state output initiate circuitry

REFLECTOMETRU LOCALIZARE DEFECTE CABLU MEGGER TDR1000/3P

• TDR1000/3P is suitable for use on both dead or live cables
• Simple operation
• AUTO set up for instant use
• Ultra fast pulse for near end fault identification
• Trace HOLD feature to allow comparison between cables
• IP54 rating offers real life working
• No blocking filters require
• Supplied with fused test leads

MEGOHMMETRU REZISTENTA IZOLATIE 5KV MEGGER S1-568

• 5 kV insulation resistance tester
• Proven ability to make accurate stable measurements in noisy environments such as 765kV substations
• Rapid charge of capacitive loads such as HV power cables
• Additional safety in high energy locations with remote operation
• always ready to test with fast charge Li-ion battery or a.c. source operation
• Designed to survive harsh environments

TRUSA TRIFAZATA CURENT-TENSIUNE VERIFICARE RELEE DE PROTECTIE MEGGER SMRT36

• Small, rugged, lightweight and powerful
• Operate with or without a computer
• Intuitive manual operation with Smart Touch View Interface
• High current, high power (60 Amps/300 VA rms) per phase
• Network interface provides IEC 61850 test capabilities
• Fully automated testing using AVTS Software

LOCATOR SCURGERI LA PAMANT CURENTI DC IN SISTEME BATERII MEGGER BGFT 246100B

• Ground faults in ungrounded dc battery systems easily located
• Operates in high electrical noise environment
• Simplifies fault tracing by identifying fault characteristic (resistive and capacitive) magnitudes

MULTI-AMP CIRCUIT BREAKER TESTER RETROFIT MEGGER DDA16, DDA30 AND DDA60

• Drop-in retrofit capability to the Multi-Amp Model CB-9116, Model DB-8130 and Model CB-8160 circuit breaker test sets
• Digital Signal Processing (DSP) technology
• Variable pulse time and firing-angle output-current control
• Complies with NEMA AB-4 Test Guidelines

FULL DATABASE DRIVEN PORTABLE APPLIANCE TESTERS MEGGER - PAT410, PAT420 AND PAT450

• Vast on-board memory to keep you the job longer
• Continuous operation, no need to stop and wait for the tester to cool down
• Instant re-start as you move from room to room testing
• Soft keys to speed you through the testing process

CIRCUIT BREAKER TESTER RETROFIT MEGGER � DDA1600

• Digital signal processing technology
• Variable firing angle and pulse duration
• Modular, portable design
• Complies with NEMA AB-4 Test Guidelines