• High accuracy and wide measurement range
? Automatic measurement process
? Measures capacitive, resistive or inductive test objects
? High accuracy ratio measurements
? Works with any standard capacitor or resistor value without any recalculations
? All standard UST and GST configurations

CDAX 605 is a capacitance and dissipation factor test set to be used with an external power source/generator. It is a precision instrument using a combination of bridge and direct (vector) measurements and is capable of measuring capacitive, resistive and inductive loads.

CDAX 605 is designed for laboratory, production line or field testing of electrical equipment insulation and insulating materials as well as e.g. calibration of CCVTs and other ratio devices. A test set with unique high accuracy for the most demanding applications.

Accesorii standard

CDAX 605 AI-19090

Included accessories

Mains cable

Ground cable

Ethernet cable

CDAX Control (PC SW)

Transport case

User’s Manual

Optiuni recomandate

Optional accessories

5 A measuring cables

6 m (20 ft) with one UHF connector and one open end GC-30410

5 A measuring cables

18 m (60 ft) with one UHF connector and one open end GC-30420

Other cables/connector configurations on request

CDB605 Demo box for CDAX AI-90010

CRD605 High voltage resistor, 2 kV / 20 MO AI-90020

Alte produse MEGGER

KARL FISCHER MOISTURE IN OIL TEST SETS MEGGER ½ KF875 AND KF-LAB MKII

• Coulometric Karl Fischer titrimetry
• KF875 optimized for insulating oil with an SG of 0.875, completely portable
• KF-LAB MkII offers greater flexibility, versatility and sample data input than the KF875; also completely portable
• KF-LAB MkII analyzes materials with an SG between 0.6 & 1.4, plus insulating oils with an SG of 0.875

EARTH LEAKAGE CLAMPMETER MEGGER - DCM300E

• 0.01 mA resolution
• EMC and IEC61010-2-032 compliance
• 30 mA, 300 mA, 30 A and 300 A range

MEGOHMMETRU REZISTENTA IZOLATIE 5KV MEGGER MIT515/2

• Mod RE>Act precizie şi siguranţă îmbunătăţite
• Funcţie de predicţie PI (PIp)
• Măsoară până la 20 TΩ
• Rejecţie a zgomotului de până la 3 mA

BATTERY IMPEDANCE TESTER MEGGER - BITE2 AND BITE2P

• Determines condition of lead-acid and NiCd cells up to 7000 Ah
• On-board Pass/Warning/Fail indications
• Robust, repeatable instruments
• On-line testing

TESTER IZOLATIE SI CONTINUITATE MEGGER MIT300 MIT310 MIT320 MIT330

• Extrem de ușor de utilizat
• Carcasă rezistentă din cauciuc
• Capac de protecţie autonom
• Avertizare circuit sub tensiune
• Rezistenţă la intemperii conform IP54

EARTH LEAKAGE CLAMPMETER MEGGER - DCM305E

• 0.001 mA resolution
• Up to 100 A range for standard AC current measurements
• TRMS reading
• Low pass filter to aid stability of readings

REFLECTOMETRU LOCALIZARE DEFECTE CABLU MEGGER TDR1000/3P

• TDR1000/3P is suitable for use on both dead or live cables
• Simple operation
• AUTO set up for instant use
• Ultra fast pulse for near end fault identification
• Trace HOLD feature to allow comparison between cables
• IP54 rating offers real life working
• No blocking filters require
• Supplied with fused test leads

VACUUM INTERRUPTER TESTER MEGGER - VIDAR

• Tests the integrity of vacuum interrupters quickly, safely and easily
• User defined voltage selection
• Extensive voltage range
• Easy to operate. Follows ANSI/IEEE standardized DC test methods.
• Lightweight and portable

MEGGER MIT400/2 MIT410/2 MIT420/2 MIT430/2 TESTER IZOLATIE CAT IV 1000V

• Testarea izolaţiei până la 1000 V şi 200 GΩ
• Tensiune de testare a izolaţiei stabilizată (Nou)
• Gamă unică, testare a continuităţii mai rapidă de la 0,01 Ω la 1 MΩ
• Măsurare tensiune AC şi DC 600 V T RMS
• CAT IV 600 V şi IP54

TRUSA MASURA TANGENTA UNGHI DE PIERDERI TANGETA DELTA MEGGER DELTA4310

• fully automatic 12 kV insulation power factor / dissipation factor (tan delta) test set
• Voltage: 25 V to 12 kV, 1 V resolution
• Current : 0 to 5 Amps, 0.1 µA maximum resolution
• Capacitance: 0 to 100 µF, 0.01 pF maximum resolution
• Inductance: 6 H to 10 MH, 0.1 mH maximum resolution
• Power factor PF : 0-100% (0-1), 0.001% maximum resolution
• Dissipation factor DF : 0-100 (0-10,000%), 0.001% maximum resolution
• Watt Loss: 0 to 2 kW
• Automatic and manual operation
• Accurate and repeatable measurement results with high noise suppression
• Lightweight, rugged two-piece design