Reflectometru TDR localizare defecte cabluri Megger TDR2000/2

Cod: Megger TDR2000/2 TDR2000/2RM TDR2000/2R


 

Brosura produs PDF, 0.28 Mb
   

Descriere

• 20 km range at VF = 0.90
• Monochrome or colour options
• Primary cell or rechargeable options
• Large back lit LCD Display
• Dual cursor measurement
• Intermittent fault location
• Output pulse amplitude and width control
• "TX Null" technology
• No blocking filter required
• Trace Master PC software included
• 15 memory trace storage
• IP54 Rating
• 2 year Warranty

 

The MEGGER TDR2000/2 is a state of the art, monochrome or colour, dual channel Time Domain Reflectometer, capable of identifying and locating a wide range of faults on metallic cables.

The TDR2000/2 has a minimum resolution of 0.1m and a maximum range of 20 km at VF=0.9 and 16 Km at 0.65 VF. The TDR2000/2 can perform single or dual channel measurements on a wide range of metallic cables. Active channels can be compared with each other or with previously stored traces from memory. Differential channel measurements are possible and cross talk between channels can also be identified.

 

 

Accesorii standard

Models:
TDR2000/2 Monochrome Drycell TDR2000/2

TDR2000/2RM Monochrome Rechargeable TDR2000/2RM

TDR2000/2R Colour Rechargeable TDR2000/2R

 

Included Accessories

Test and carry Pouch 6420-114

Serial data lead 25955-025

2 x Miniature Clip Test Lead Set 6231-654

Carry Strap for Pouch 6220-611

Tracemaster software 6111-458

User Guide 6172-662

 

Included Accessories TDR2000/2R Only

Battery charger

 

Optional Accessories

Dual fused test lead set (2 pairs) 1002-136

Battery charger UK mains 6121-538

Battery charger US mains 6121-539

Battery charger European mains 6121-605

Single fused lead set (1 pair) 1002-015

 

Alte produse MEGGER

STATIC / DYNAMIC RESISTANCE MEASUREMENT ACCESSORY FOR TM SERIES MEGGER - SDRM202

• Enables resistance measurement on circuit breakers
• Small and light weight
• A number of operations can be run with short waiting intervals

 

TESTER DE IZOLATIE SI CONTINUITATE CU ALARMA MEGGER - MIT200 SERIES

• Sunt disponibile doua sau trei tensiuni de test asigur½nd solutia ideala pentru majoritatea aplicatiilor din zona tensiunilor joase
• Masurarea rezistentei de izolatie p½na la 1000 M? pe toate domeniile
• Descarcarea automata ne asigura ca toate circuitele sunt descarcate sigur dupa ½ncheierea testelor
• Tensiunea de test a izolatiei de 1000 V are o avertizare de ½nalta tensiune ½nainte de a aplica tensiunea

 

MEGGER - B10E

• Reliable and stable a.c. and d.c. power supply for circuit breaker testing
• Continuously variable 24-250 V AC or DC output
• Separate outputs for close coil, trip coil and spring charging motor voltage
• Direct triggering for minimum trip voltage testing

 

MEGGER MIT400/2 MIT410/2 MIT420/2 MIT430/2 TESTER IZOLATIE CAT IV 1000V

• Testarea izolaţiei până la 1000 V şi 200 GΩ
• Tensiune de testare a izolaţiei stabilizată (Nou)
• Gamă unică, testare a continuităţii mai rapidă de la 0,01 Ω la 1 MΩ
• Măsurare tensiune AC şi DC 600 V T RMS
• CAT IV 600 V şi IP54

 

ANALIZOR RASPUNS IN FRECVENTA TRANSFORMATOR MEGGER FRAX200 FRAX150

• Gamă dinamică ridicată și precizie
• Software de asistență ușor de utilizat cu instrumente de analiză avansate
• Cel mai mic instrument SFRA din industrie
• Hardware conceput pentru a asigura conexiuni repetabile
• Îndeplinește standardele internaționale pentru SFRA

 

DUAL POWER MICRO-OHMMETER MEGGER DLRO10HDX DUCTER

• Interchangeable test lead terminations
• High or low output power selection for condition diagnosis
• Operates from battery or AC mains supply
• Protected to 600 V without blowing a fuse, test lead live voltage warning light

 

MICRO OHMMETRU 10A MEGGER DLRO10X

• up to 10A current
• Accurate results in under three seconds
• Auto current reversal cancels standing emfs
• Fuse protected to 600 V
• NiMH battery reduces weight
• 250 mW power limit (with optional override) to avoid heating the test sample

 

TESTER BATERII ACUMULATORI MEGGER BITE5

• Măsoară impedanța pe celule de până la 200 V
• Suportă plumb-acid, NiCD și litiu-ion
• Măsoară tensiuni DC de până la 1000 V
• Măsoară tensiuni AC de până la 600 V
• Configurarea și monitorizarea tendințelor ecranului tactil
• USB și card micro SD
• Măsoară curentul AC și DC

 

REFLECTOMETRU LOCALIZARE DEFECTE CABLU MEGGER TDR1000/3P

• TDR1000/3P is suitable for use on both dead or live cables
• Simple operation
• AUTO set up for instant use
• Ultra fast pulse for near end fault identification
• Trace HOLD feature to allow comparison between cables
• IP54 rating offers real life working
• No blocking filters require
• Supplied with fused test leads

 

PRIMARY CURRENT INJECTION TEST SYSTEM MEGGER INGVAR

• Most advanced primary current injection test system to simplify all types of switchgear and CT commissioning, ground grid, circuit breaker testing and more
• Up to 5000 A output current
• Two units, each of about 20 kg, makes it easier to carry
• Unique I/30 function allows the current to be pre-set using low current to prevent test sample heating, thus eliminating corruption of test result