Model OCR-8015 and Model OCR-9150 Automatic Oil Circuit Recloser Test Sets are self-contained mobile test sets specifically designed to verify the proper operation of automatic circuit reclosers under simulated overload and fault conditions. This ensures reliable system protection and coordination. Microprocessor-based control and instrumentation systems ensure simple operation with precise test results.

Model OCR-8015 and Model OCR-9150 provide a variable high-current output with an impedance compensation network to stabilize the output current. They include appropriate instrumentation and control circuitry to efficiently, accurately and safely test virtually all single-phase and three-phase direct-acting reclosers produced by manufacturers such as Cooper Power Systems, Inc., McGraw-Edison (Kyle, Line Material), Westinghouse, General Electric, Kearney, and Lexington Switch and Controls.

Features:

Preprogrammed test sequences for reclosers and sectionalizers
High-capacity outputs to test virtually all reclosers
Accurate duplication of high-voltage test results
Simple operation and precise test results
Simplified adjustment of test current

Alte produse MEGGER

BATTERY VOLTAGE MONITOR MEGGER - BVM, BVM300 AND BVM600

• Automates battery voltage measurement during capacity tests
• ½Daisy-chain½ design allows expandability up to 120 units
• High accuracy and stability for precise data collection
• Integrates with TORKEL Win and PowerDB Test Data Management software

MULTIFUNCTION INSTALLATION TESTERS MEGGER - MFT1735

• Two and three wire non-trip loop testing for RCD protected circuits
• Type-B RCD and 3-phase RCD testing for industrial applications with no Earth
• 3-terminal earth test and stakeless testing for earth electrode resistance measurement **
• Internal memory and Bluetooth® communications

KARL FISCHER MOISTURE IN OIL TEST SETS MEGGER ½ KF875 AND KF-LAB MKII

• Coulometric Karl Fischer titrimetry
• KF875 optimized for insulating oil with an SG of 0.875, completely portable
• KF-LAB MkII offers greater flexibility, versatility and sample data input than the KF875; also completely portable
• KF-LAB MkII analyzes materials with an SG between 0.6 & 1.4, plus insulating oils with an SG of 0.875

MEGGER - MS2A CIRCUIT BREAKER AND OVERCURRENT RELAY TEST SET

• Light Weight, Portable Primary Injection Test Instrument
• Overcurrent Relay Testing
• Ground Fault Performance Testing for NEC 230.95
• Circuit Breaker Testing

MICRO OHMMETRU 10A MEGGER DLRO10X

• up to 10A current
• Accurate results in under three seconds
• Auto current reversal cancels standing emfs
• Fuse protected to 600 V
• NiMH battery reduces weight
• 250 mW power limit (with optional override) to avoid heating the test sample

TESTER CAPACITATE SI FACTOR DISIPATIE TRANSFORMATOARE MEGGER CDAX-605

• capacitance and dissipation factor test
• High accuracy and wide measurement range
• Automatic measurement process
• Measures capacitive, resistive or inductive test objects
• High accuracy ratio measurements
• Works with any standard capacitor or resistor value without any recalculations
• All standard UST and GST configurations

TRUSA COMPLEXA PENTRU VERIFICAREA RELEELOR DE PROTECTIE MEGGER FREJA 400

• FREJA 403 3x60 A at 300 VA per phase.
• FREJA 406 Up to 6 channels: 3 x 60 A and 3 x 15 A
• FREJA 409 Up to 9 channels: 6 x 60 A and 3 x 15 A
• Voltage outputs : Up to four channels 300 V at 150 VA
• Fully automated testing using FREJA Win software
• PC operated or stand alone using the intuitive graphic touch screen
• High current, high power output (60 A / 300 VArms) per phase
• FREJA 409 provides 3 x 120 A in threephase configuration mode
• FREJA 406 provides 6 currents, and FREJA 409 provides 9 currents for transformer differential testing
• IEC 61850 test capabilities

TESTER IZOLATIE SI CONTINUITATE MEGGER MIT200 MIT210 MIT220 MIT230

• Testoare de izolaţie şi continuitate de buzunar - MIT210, MIT220, MIT230
• Testarea izolaţiei până la 1000 MΩ
• Testarea continuităţii la 200 mA până la 0,01 Ω
• Avertizare circuit sub tensiune (afișaj tensiune) şi blocare test
• Afișaj digital/analogic

TRUSA CURENT-TENSIUNE PENTRU VERIFICAREA RELEELOR DE PROTECTIE MEGGER FREJA 306

• current outputs, higher amps (3 x 15 A + 3 x 35 A), VA or compliance voltage.
• test differential relays with 6 currents, or virtually any single or 3-phase relay
• For secondary testing of protection relays
• Can be used stand-alone or with a PC
• Flexble, can test many relay types
• Lightweight and portable
• Greatest possible precision

TESTER RAPORT TRANSFORMARE, CURENT EXCITATIE, POLARITATE TRANSFORMATOARE MEGGER TTR25

• Fully automatic; fast; easy-to-use; robust; lightweight
• Battery powered
• Tests turns ratio, excitation current, and polarity
• Simple, one-button operation
• Quick-start guide on front panel
• Operator-selectable languages