Broadcast si Distributie TV | PROMAX

• record a transport stream continuously for several hours up to 15 hours at 20 Mbps
• ASI transport stream Input, Maximum data rate 150 Mbps
• ASI transport stream Output, SPI parallel transport stream Output, Maximum data rate 90 Mbps
• Hard disk 160 GB Storage Capacity
• USB, Ethernet interface

 

• integrated DVB-T tuner that allows the TS capture in real time
• record a transport stream continuously for several minutes and then play it back
• work in the field where maybe it is not possible to find electricity available
• ASI Transport Stream Input: Maximum data rate 40 Mb/s
• RF Input: DVB-T from 35 to 100 dBµV
• ASI & SPI parallel Transport Stream Output: Maximum data rate 32 Mb/s
• Storing Capacity: Memory card 4 GB, 20 minutes approx (20 Mbits/s)

 

• DVB-T (DTT) output
• converts analogue/ digital video source to DVB-T with a max 200 programmes in the UHF band
• transmodulate Satellite TV channels to Digital Terrestrial Television multiplexes
• system allows to re-organise the spectrum, adding the off-air DTT channels received in the region
• encoding video-audio channels
• remotely controlled through Ethernet

 

• TS INPUT: 2 DVB-ASI independent inputs
• RF OUTPUT: 2 independent combined DVB-T multiplex
• Filtering table up to 32 PID
• Measurement: Bitrate of the output multiplex
• includes an internal combiner that delivers a single DVB-T output with high C/N

 

• DVB-S FI INPUT: 2 independent DVB-S FI inputs
• RF OUTPUT: 2 combined DVB-T multiplexes
• PID Filtering with Filtering Table up to 32 PID
• Measurement: Bitrate of the output multiplex
• includes an internal combiner that delivers a single DVB-T output with high C/N

 

• RF INPUTS: 2 independent DVB-T inputs
• RF OUTPUT: 2 combined independent DVB-T multiplexes
• PID Filtering with Filtering Table up to 32 PID
• direct COFDM input that can be tuned to any multiplex
• ouput in the UHF band
• regenerate the quality of the multiplex when received from a noisy source
• change the input channel to another channel with total quality preservation

 

• DVB-S/S2 FI INPUT: 2 independent DVB-S/S2 IF inputs
• RF OUTPUT: 2 independent combined DVB-T multiplexes
• interface for Conditional Access Module (CAM)
• PID Filtering Table up to 32 PID

 

• DVB-S/S2 IF INPUT: 2 independent DVB-S/S2 inputs
• TS OUTPUT: 2 double independent DVB-ASI outputs
• allows inserting a Conditional Access Module (CAM)
• Selection of decrypted services by name

 

• RF INPUT: 2 DVB-T independent inputs
• TS OUTPUT: 2 independent double DVB-ASI outputs
• CAM and ASI output

 

• IP INPUT: Ethernet 100/1000 Mbps. RJ45 connector
• TS OUTPUT: 4 x DVB-ASI. BNC Female connector, 75 ?
• Communication protocol: UDP or RTP/UDP communication protocol
• Transmision methode: MULTICAST / IGMP Version 2
• Payload: From 1 to 7 packets MPEG-2

 

• TS INPUT: 4 x DVB-ASI
• IP OUTPUT: Ethernet 100/1000 Mbps. RJ45 connector
• Communication Protocol: UDP or RTP/UDP
• Transmission methode: MULTICAST
• Payload: 7 MPEG-2 packets

 

• A/V INPUTS: 4 independent A/V inputs
• RF OUTPUT: 1 DVB-T multiplex
• TS-ASI OUTPUT: optional
• MPEG-2 ENCODER
• Video input: PAL/NTSC
• Audio input: Stereo/Mono/Dual/Joint Stereo

 

• RF INPUT Frequency margin: From 470 to 862 MHz, From 50 to 1000 MHz(other options)
• FO OUTPUT Wavelength: 1550 ±20 nm (other wavelength as option)
• Fibre: 9/125, SMF28 or equivalent
• Connector: SC/APC
• optical links over distances up to 20 km

 

• OPTICAL INPUT: From 1100 to 1600 nm
• RF OUTPUT: From 470 MHz to 862 MHz
• optical SC input and an RF type BNC output
• suitable for optical links up to 40 km away

 

• INPUTS FOR EACH COMBINER: 4 BNC female inputs 75 ? (16 total)
• OUTPUTS FOR EACH COMBINER: 1 BNC female output 75 ? (4 total)
• allows many different combinations to adapt to the needs of each system as best as possible
• used to mix the output RF signals of the COFDM modulators and transmodulators
• preserves better the original quality and maintains lower noise levels

 

• FREQUENCY MARGIN: From 50 MHz (C-2) to 860 MHz (C-69)
• INPUTS: 8 inputs Female BNC, 75 ? impedance
• RF OUTPUT: 1 female BNC output, 75 ? impedance
• output designed to mix output RF signals of COFDM modulators and transmodulators with DTT channels

 

• FREQUENCY MARGIN: From 50 MHz (C-2) to 860 MHz (C-69)
• INPUTS: 4 inputs Female BNC, 75 ? impedance
• RF OUTPUT: 1 female BNC output, 75 ? impedance
• output designed to mix output RF signals of COFDM modulators and transmodulators with DTT channels

 

• FREQUENCY BANDS: UHF from 470 MHz ~ 862 MHz
• 1 W RF power amplifier for COFDM signals
• both for single carrier or multicarrier system
• provides an amplified output of 30 dBm (137 dBµV)
• preserves the original signal quality and maintains a low noise levels

 

• MPEG-2 TS INPUT: 2x DVB-ASI, 1x DVB-SPI
• IF OUTPUT: Fixed at 36 MHz
• RF OUTPUT: 475-875 MHz (45-875 MHz for MO-161 model)
• CONSTELLATIONS: QPSK, 16QAM, 64QAM

 

• QPSK INPUT: 950 - 2150 MHz / -65 dBm to -25 dBm
• MPEG-2 TS INPUT: 2x DVB-ASI, 75 ? BNC female connector
• IF OUTPUT: Fixed at 36 MHz
• RF OUTPUT: 475 - 875 MHz (45 - 875 MHz for MO-163)