Brand: Hameg

Programmable Precision Quadruple Power Supply Hameg HMP4040

Code: Hameg HMP4040


 

Datasheet PDF, 0.68 Mb

Description

  • 4 x 0…32V/0…10A 384W max.
  • 384W Output Power realized by intelligent Power Management 
  • Low Residual Ripple: <150µVrms due to linear Post Regulators 
  • High Setting- and Read-Back Resolution of 1mV up to 0.2mA 
  • Keypad for direct Parameter Entry 
  • Galvanically isolated, earth-free and short circuit protected Output Channels 
  • Advanced Parallel- and Serial Operation via V/I Tracking 
  • EasyArb Function for free definable V/I Characteristics 
  • FuseLink: Individual Channel Combination of Electronic Fuses 
  • Free adjustable Overvoltage Protection (OVP) for all Outputs 
  • All Parameters clearly displayed via LCD/Glowing Buttons 
  • Rear Connectors for all Channels including Sense 
  • USB/RS-232 Interface, optional Ethernet/USB or IEEE-488 (GPIB)
 

Standard accessories

  • Line cord
  • Operating manual
  • CD
 

Recommended options

  • HO730 Dual-Interface Ethernet/USB
  • HO740 Interface IEEE-488 (GPIB), galvanically isolated
  • HZ10S 5 x silicone test lead (measurement connection in black)
  • HZ10R 5 x silicone test lead (measurement connection in red)
  • HZ10B 5 x silicone test lead (measurement connection in blue)
  • HZ13 Interface cable (USB) 1.8 m
  • HZ14 Interface cable (serial) 1:1
  • HZ42 2RU 19’’ Rackmount Kit
  • HZ72 GPIB-Cable 2 m
 

More products Hameg

PROGRAMMABLE PRECISION TRIPLE POWER SUPPLY HAMEG HMP4030

• 3 x 0…32V/0…10A 384W max.
• 384W Output Power realized by intelligent Power Management
• Low Residual Ripple: <150µVrms due to linear Post Regulators
• High Setting- and Read-Back Resolution of 1mV up to 0.2mA

 

DIGITAL OSCILLOSCOPE 4 X 200 MHZ HAMEG HMO2024

• 200 MHz bandwidth
• 4 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
• 2 GSa/s sample rate on 2 channels, 1 GSa/s on 4 channels

 

PRECISION PROGRAMMABLE LCR-BRIDGE 200 KHZ HAMEG HM8118

• Basic Accuracy 0.05 %
• Measurement Functions L, C, R, |Z|, X, |Y|, G, B, D, Q, T, ?, M, N
• Test Frequencies 20Hz…200kHz
• Up to 12 Measurements per Second
• Parallel and Series Mode

 

ARBITRARY WAVEFORM GENERATOR 50 MHZ HAMEG HMF2550

• Frequency Range 10µHz…50MHz
• Output Voltage 5mVpp…10Vpp (into 50O) DC Offset ±5mV…5V
• Arbitrary Waveform Generator: 250MSa/s, 14Bit, 256kPts
• Sine, Square, Pulse, Triangle, Ramp, Arbitrary Waveforms incl. Standard Curves (white Noise, Cardiac etc.)

 

UNIVERSAL FREQUENCY COUNTER 1.6 GHZ HAMEG HM8021-4

• Measurement Range 0Hz…1.6GHz
• 10MHz Time Base with 1ppm Stability (TCXO)
• Input A: Input Impedance 1MO, Sensitivity 20mVrms
• Input C: Input Impedance 50O, Sensitivity 30mVrms
• 8-Digit Resolution for 10s Measuring Time

 

LCR-METER 25 KHZ HAMEG HM8018

• Measurement Functions: L, C, R, T, Q/D, |Z|
• Basic Accuracy 0.2%
• 5 Measurement Frequencies: 100Hz, 120Hz, 1kHz, 10kHz, 25kHz
• Max. Resolution: 0.001O, 0.001pF, 0.01µH

 

DIGITAL OSCILLOSCOPE 4 X 350 MHZ HAMEG HMO3524

• 350 MHz bandwidth
• 2 analog channels and MSO(Mixed Signal Opt.HO3508 [HO3516]) with 8 [16] Logic Channels
• 2 GSa/s sample rate on each channel, 4 GSa/s on half-channel

 

DIGITAL PROGRAMMABLE MULTIMETER 4.75 DIGIT HAMEG HM8012

• 4¾-Digit Display with 50,000 Counts
• Basic Accuracy 0.05%
• Max. Resolution: 10µV, 0.01dBm, 10nA, 10mO, 0.1°C
• RS-232 Interface and Software included

 

PRECISION PROGRAMMMABLE DOUBLE POWER SUPPLY HAMEG HMP2020

• 1 x 0…32V/0…10A 1 x 0…32V/0…5A 188W max.
• 188W Output Power realized by intelligent Power Management
• Low Residual Ripple: <150µVrms due to linear Post Regulators
• High Setting- and Read-Back Resolution of 1mV up to 0.1mA

 

DC POWER SUPPLY MAINFRAME UNIT FOR HAMEG 8000 SERIES

• Basic Unit for Modules of the Modular System Series 8000
• Power Supply for 2 Modules
• DC Voltages electronically regulated, floating and short-circuit proof
• Power Transformer with thermal Fuse