Brand: Hameg

Precision Triple Power Supply Hameg HM7042-5

Code: Hameg HM7042-5


 

Datasheet PDF, 0.18 Mb

Description

  • 2 x 0…32V/0…2A 1 x 0…5.5V/0…5A 
  • High-Performance and inexpensive Laboratory Power Supply 
  • Floating, overload and short-circuit proof Outputs 
  • Separate Voltage and Current Displays for each Output, 4 Digits at Channel 1+3; 3 Digits at Channel 2 
  • Display Resolution: 10mV/1mA at Channel 1+3; 10mV/10mA at Channel 2 
  • Protection of sensitive Loads by Current Limit or Electronic Fuse 
  • Pushbutton for Activating/Deactivating all Outputs 
  • Low Residual Ripple, high Output Power, very good Regulation 
  • Parallel (up to 9A) and Series (up to 69.5V) Operation 
  • Temperature-controlled Fan
 

Standard accessories

  • Operator’s Manual
  • power cable
 

Recommended options

  • HZ10S/R (17-0010-000S/R) Silicone test lead
  • HZ42 (27-0042-0000) 19’’ Rackmount Kit 2RU
 

More products Hameg

ARBITRARY WAVEFORM POWER SUPPLY HAMEG HM8143

• 2x 0…30V/0…2A 1x 5V/0…2A
• Display resolution 10mV/1mA
• Parallel (up to 6A) and Series (up to 65V) Operation
• Electronic load up to 60W per channel (max. 2A)
• Arbitrary waveform power supply (4096 points, 12 bit)

 

DIGITAL OSCILLOSCOPE 4 X 350 MHZ HAMEG HMO3524

• 350 MHz bandwidth
• 2 analog channels and MSO(Mixed Signal Opt.HO3508 [HO3516]) with 8 [16] Logic Channels
• 2 GSa/s sample rate on each channel, 4 GSa/s on half-channel

 

PROGRAMMABLE PRECISION TRIPLE POWER SUPPLY HAMEG HMP4030

• 3 x 0…32V/0…10A 384W max.
• 384W Output Power realized by intelligent Power Management
• Low Residual Ripple: <150µVrms due to linear Post Regulators
• High Setting- and Read-Back Resolution of 1mV up to 0.2mA

 

DC POWER SUPPLY MAINFRAME UNIT FOR HAMEG 8000 SERIES

• Basic Unit for Modules of the Modular System Series 8000
• Power Supply for 2 Modules
• DC Voltages electronically regulated, floating and short-circuit proof
• Power Transformer with thermal Fuse

 

DIGITAL OSCILLOSCOPE 2 X 150 MHZ HAMEG HMO1522

• 150 MHz bandwidth
• 2 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
• 2 GSa/s sample rate on 1 channel, 1 GSa/s on 2 channels

 

DIGITAL OSCILLOSCOPE 2 X 350 MHZ HAMEG HMO3522

• 350 MHz bandwidth
• 2 analog channels and MSO(Mixed Signal Opt.HO3508 [HO3516]) with 8 [16] Logic Channels
• 2 GSa/s sample rate on each channel, 4 GSa/s on half-channel

 

DIGITAL PROGRAMMABLE MULTIMETER 4.75 DIGIT HAMEG HM8012

• 4¾-Digit Display with 50,000 Counts
• Basic Accuracy 0.05%
• Max. Resolution: 10µV, 0.01dBm, 10nA, 10mO, 0.1°C
• RS-232 Interface and Software included

 

DIGITAL OSCILLOSCOPE 4 X 70 MHZ HAMEG HMO724

• 70 MHz bandwidth
• 4 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
• 2 GSa/s sample rate on 2 channels, 1 GSa/s on 4 channels

 

DIGITAL OSCILLOSCOPE 4 X 250 MHZ HAMEG HMO2524

• 250 MHz bandwidth
• 4 analog channels and MSO(Mixed Signal Opt.HO3508 [HO3516]) with 8 [16] Logic Channels
• 1.25 GSa/s sample rate on 4 channels, 2.5GSa/s on 2 channels

 

ANALOG OSCILLOSCOPE 2 X 100 MHZ HAMEG COMBISCOPE HM1008-2

• 100 MHz bandwith CombiScope® with FFT
• 2 analog channels
• 1GSa/s Real Time Sampling, 10GSa/s Random Sampling
• 1MPts Memory per Channel, Memory Zoom up to 40,000:1