Brand: Hameg

Digital Oscilloscope 4 x 70 MHz Hameg HMO724

Code: Hameg HMO724


 

Datasheet PDF, 0.78 Mb

Description

  • 70 MHz bandwidth
  • 4 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
  • 2 GSa/s sample rate on 2 channels, 1 GSa/s on 4 channels
  • 2 MPts Memory, Memory Zoom up to 50,000:1 
  • Serial Bus Trigger and Hardware accelerated Decode, I2C, SPI, UART/RS-232 (Opt. HOO10, HOO11) 
  • 8 User definable Markers for easy Navigation 
  • Pass/Fail Test based on Masks 
  • Vertical Sensitivity 1 mV/div., Offset Control ±0.2...±20 V 
  • 12 div. x-Axis Display Range, 20 div. y-Axis Display Range (VirtualScreen) 
  • Trigger Modes: Slope, Video, Pulsewidth, Logic, Delayed, Event 
  • Component tester, 6 Digit Counter, Automeasurement, Formula Editor, Ratiocursor, FFT for Spectral Analysis 
  • Crisp 16.5 cm (6.5") TFT VGA Display, DVI Output 
  • Lowest Noise Fan 
  • 3 x USB for Mass Storage, Printer and Remote Control
  • optional IEEE-488 (GPIB) or Ethernet/USB
 

More products Hameg

ANALOG OSCILLOSCOPE 2 X 40 MHZ HAMEG COMBISCOPE HM507

• 50 MHz bandwidth
• 2 analog channels
• Time Base 20ns/div."100s/div
• 100MSa/s Real Time Sampling, 2GSa/s Random Sampling
• 2kPts Memory per Channel

 

SPECTRUM ANALYZER 100 KHZ..1.6GHZ HAMEG HMS1000/ HMS1010

• Frequency Range 100kHz1.6GHz
• Tracking Generator HMS1010 -200dBm
• Amplitude Measurement Range -114+20dBm
• DANL -135dBm with Preamp. Option HO3011
• Sweep Time 20ms1,000s
• Resolution Bandwidth 100Hz1MHz in 1-3 Steps, 200kHz (-3dB); additional 200Hz, 9kHz, 120kHz, 1MHz (-6dB)

 

DIGITAL PROGRAMMABLE MULTIMETER 4.75 DIGIT HAMEG HM8012

• 4-Digit Display with 50,000 Counts
• Basic Accuracy 0.05%
• Max. Resolution: 10µV, 0.01dBm, 10nA, 10mO, 0.1°C
• RS-232 Interface and Software included

 

DC POWER SUPPLY MAINFRAME UNIT FOR HAMEG 8000 SERIES

• Basic Unit for Modules of the Modular System Series 8000
• Power Supply for 2 Modules
• DC Voltages electronically regulated, floating and short-circuit proof
• Power Transformer with thermal Fuse

 

DIGITAL OSCILLOSCOPE 2 X 70 MHZ HAMEG HMO722

• 70 MHz bandwidth
• 2 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
• 2 GSa/s sample rate on 1 channel, 1 GSa/s on 2 channels

 

FUNCTION GENERATOR 10 MHZ HAMEG HM8030-6

• Frequency Range 50mHz10MHz
• Output Voltage up to 10Vpp (into 50O)
• Waveforms: Sine Wave, Triangle, Square Wave, Pulse, DC

 

ARBITRARY WAVEFORM GENERATOR 25 MHZ HAMEG HMF2525

• Frequency Range 10µHz25MHz
• Output Voltage 5mVpp10Vpp (into 50O) DC Offset ±5mV5V
• Arbitrary Waveform Generator: 250MSa/s, 14Bit, 256kPts
• Sine, Square, Pulse, Triangle, Ramp, Arbitrary Waveforms incl. Standard Curves (white Noise, Cardiac etc.)

 

LCR-METER 25 KHZ HAMEG HM8018

• Measurement Functions: L, C, R, T, Q/D, |Z|
• Basic Accuracy 0.2%
• 5 Measurement Frequencies: 100Hz, 120Hz, 1kHz, 10kHz, 25kHz
• Max. Resolution: 0.001O, 0.001pF, 0.01µH

 

UNIVERSAL FREQUENCY COUNTER 1.6 GHZ HAMEG HM8021-4

• Measurement Range 0Hz1.6GHz
• 10MHz Time Base with 1ppm Stability (TCXO)
• Input A: Input Impedance 1MO, Sensitivity 20mVrms
• Input C: Input Impedance 50O, Sensitivity 30mVrms
• 8-Digit Resolution for 10s Measuring Time

 

ARBITRARY WAVEFORM POWER SUPPLY HAMEG HM8143

• 2x 030V/02A 1x 5V/02A
• Display resolution 10mV/1mA
• Parallel (up to 6A) and Series (up to 65V) Operation
• Electronic load up to 60W per channel (max. 2A)
• Arbitrary waveform power supply (4096 points, 12 bit)