Digital Programmable Multimeter 4.75 digit Hameg HM8012

• Wide Measurement Range 1mW…8kW
• Voltage Range 100mV…500V, Current Range 1mA…16A
• Frequency Range DC…1kHz
• Simultaneous Voltage, Current and Power Display
• Display of apparent, effective and reactive Power
• Power Factor Display

 

• 200 MHz bandwidth
• 4 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
• 2 GSa/s sample rate on 2 channels, 1 GSa/s on 4 channels

 

• Outstanding Frequency Range 1Hz…3GHz
• Output Power -135…+13dBm
• Frequency Resolution 1Hz (Accuracy 0.5ppm)

 

• 100 MHz bandwith CombiScope® with FFT
• 2 analog channels
• 1GSa/s Real Time Sampling, 10GSa/s Random Sampling
• 1MPts Memory per Channel, Memory Zoom up to 40,000:1

 

• 1 x 0…32V/0…10A 1 x 0…32V/0…5A 188W max.
• 188W Output Power realized by intelligent Power Management
• Low Residual Ripple: <150µVrms due to linear Post Regulators
• High Setting- and Read-Back Resolution of 1mV up to 0.1mA

 

• 100 MHz bandwidth
• 2 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
• 2 GSa/s sample rate on 1 channel, 1 GSa/s on 2 channels

 

• Frequency Range 10µHz…50MHz
• Output Voltage 5mVpp…10Vpp (into 50O) DC Offset ±5mV…5V
• Arbitrary Waveform Generator: 250MSa/s, 14Bit, 256kPts
• Sine, Square, Pulse, Triangle, Ramp, Arbitrary Waveforms incl. Standard Curves (white Noise, Cardiac etc.)

 

• 3 x 0…32V/0…10A 384W max.
• 384W Output Power realized by intelligent Power Management
• Low Residual Ripple: <150µVrms due to linear Post Regulators
• High Setting- and Read-Back Resolution of 1mV up to 0.2mA

 

• Basic Accuracy 0.05 %
• Measurement Functions L, C, R, |Z|, X, |Y|, G, B, D, Q, T, ?, M, N
• Test Frequencies 20Hz…200kHz
• Up to 12 Measurements per Second
• Parallel and Series Mode

 

• 2x 0…30V/0…2A 1x 5V/0…2A
• Display resolution 10mV/1mA
• Parallel (up to 6A) and Series (up to 65V) Operation
• Electronic load up to 60W per channel (max. 2A)
• Arbitrary waveform power supply (4096 points, 12 bit)