Cable Network Test | TREND NETWORKS

• Complete TIA 6A & ISO/EN/CENELEC EA Certification
• Accuracy – ETL Verified to TIA 1152-A/ IEC 61935-1 Level IIIe 500 MHz

 

• LanTEK IV-S copper and fiber data cable certifier is the future of cable certification and testing.
• Saving you time it will test and save a Cat6A link in 7 seconds and certifies links up to Cat8.1 and Cat8.2, including TCL and Resistance Unbalance measurements
• 7 second test time
• World’s fastest Cloud enabled certifier
• VisiLINQ™ permanent link adapters
• Project navigation in the Cloud

 

• VDV II performs standard tests for copper cabling
• Coax, 6Pin (RJ11/12), 8Pin (RJ45) Connectors for Copper Cable Testing
• Wiremap for Miswires, Split Pairs, Shorts and Opens
• Analog Tone Generator
• Voltage Protection
• Shielded Cable Testing
• Single Screen Results

 

• Coax, 6Pin (RJ11/12), 8Pin (RJ45) Connectors for Copper Cable Testing
• Wiremap for Miswires, Split Pairs, Shorts and Opens
• Analog Tone Generator
• Voltage Protection
• Shielded Cable Testing
• Single Screen Results
• Larger 2.9" Display
• Backlight
• Hub Blink
• Cable Length
• Distance to Open

 

• Coax, 6Pin (RJ11/12), 8Pin (RJ45) Connectors for Copper Cable Testing
• Wiremap for Miswires, Split Pairs, Shorts and Opens
• Analog Tone Generator
• Hub Blink
• Cable Length
• Distance to Open / Short (TDR)
• PoE Detection with Voltage Information
• Media Service Detection
• Ethernet Detection with Network Rate and Duplex Information

 

• Full Gigabit bi-directional load testing
• Additional Ethernet troubleshooting capabilities
• Wiremapping by pin as well as pair
• Reporting of test results
• Load test through hubs and switches

 

• Suitable for both copper and fibre
• Full Gigabit bi-directional load testing
• Additional Ethernet troubleshooting capabilities
• Wiremapping by pin as well as pair
• Reporting of test results
• Load test through hubs and switches

 

• Fast Autotest provides proof of network performance in seconds
• USB port enables rapid transfer of test results to memory stick
• Support for shielded and unshielded twisted pair cable including Cat 5e, Cat 6, Cat 6A and Cat 7 (TIA 568A and 568B wiring schemes)
• Stores up to 5000 tests to accommodate even the largest jobs
• Ability to identify and trace cables with a compatible inductive tone probe

 

• Generation of wiremaps
• Length measurement
• Recognition of PoE and PoE+ voltage
• Support of 10/100/1000 Ethernet
• Automatical DHCP recognition
• Variable Ping function for URL and IP adresses
• Trace Route function

 

• WIFI: Display of numbers of access points, available SSIDs, channels used and signal strength
• Generation of wiremaps
• Length measurement
• Recognition of PoE and PoE+ voltage
• Support of 10/100/1000 Ethernet
• Automatical DHCP recognition
• Variable Ping function for URL and IP adresses

 

• Optical Fibre: Singlemode and Multimode SFP options
• WIFI: Display of numbers of access points, available SSIDs, channels used and signal strength
• Generation of wiremaps
• Length measurement
• Recognition of PoE and PoE+ voltage
• Support of 10/100/1000 Ethernet
• Automatical DHCP recognition
• Variable Ping function for URL and IP adresses

 

• Endpoint LAN testing over copper
• IPv4 , IPv6
• Advanced wiremap including length
• Wiremap for cross-over cables (copper)
• Wiremap for 2 pair copper cables
• Wiremap for industrial cables
• PoE detection
• EDP/CDP/LLDP
• VLAN support
• 802.1x logon
• Optical power indication

 

• Physical tests of the copper pairs
• G.SHDSL Synchronisation tests
• Measurement of G.SHDSL performance
• Comparison with acceptance targets
• ATM / EFM Encapsulation /Bonding
• Up to 4 pairs G.SHDSL /G.SHDSLbis

 

• Gigabit performance testing on passive cabling and active networks
• Generates test reports to IEEE 802.3ab standard
• Simulates VoIP/CCTV/Web/IP video network traffic
• Tests connection speed, port ID, ping, traceroute, IPv4/IPv6
• Advanced PoE/PoE+ testing

 

• Frequency range of 350 MHz
• LAN cable certification to ISO Class E / Category 6 standard
• Fast test speeds - 11-second Class D/Cat 5e and 14-second Class E/Cat 6 autotest times that include full graphical data storage
• Patented test method - certify with off-the-shelf patch cords eliminating the need for expensive permanent link adapters
• Unique FiberTEK® FDX modules - fastest and easiest fibre certification
• DualMODE function - certify to two different standards with one press of the Autotest button
• Maximum reporting power with the new IDEAL DataCENTER (IDC) software
• Enormous memory capacity - save an astonishing 1,700 ISO Category 6 / Class E results with graphs

 

• Frequency range of 1000 MHz
• LAN cable certification to ISO Class Fa / Category 7a (1000MHz) standard.
• Fast test speeds - 11-second Class D/Cat 5e and 14-second Class E/Cat 6 autotest times that include full graphical data storage
• Patented test method - certify with off-the-shelf patch cords eliminating the need for expensive permanent link adapters
• Unique FiberTEK® FDX modules - fastest and easiest fibre certification
• DualMODE function - certify to two different standards with one press of the Autotest button
• Maximum reporting power with the new IDEAL DataCENTER (IDC) software
• Enormous memory capacity - save an astonishing 1,700 ISO Category 6 / Class E results with graphs

 

• Frequency range of 500 MHz
• LAN cable certification to ISO Class EA / Category 6A standard
• Fast test speeds - 11-second Class D/Cat 5e and 14-second Class E/Cat 6 autotest times that include full graphical data storage
• Patented test method - certify with off-the-shelf patch cords eliminating the need for expensive permanent link adapters
• Unique FiberTEK® FDX modules - fastest and easiest fibre certification
• DualMODE function - certify to two different standards with one press of the Autotest button
• Maximum reporting power with the new IDEAL DataCENTER (IDC) software
• Enormous memory capacity - save an astonishing 1,700 ISO Category 6 / Class E results with graphs

 

• Endpoint LAN testing over copper
• IPv4 , IPv6
• Advanced wiremap including length
• Wiremap for cross-over cables (copper)
• Wiremap for 2 pair copper cables
• Wiremap for industrial cables
• PoE detection

 

• Endpoint LAN testing over copper
• IPv4 , IPv6
• Advanced wiremap including length
• Wiremap for cross-over cables (copper)
• Wiremap for 2 pair copper cables
• Wiremap for industrial cables
• PoE detection
• EDP/CDP/LLDP
• VLAN support

 

• Gigabit Ethernet transmission tester with single copper port, optical port
• One touch to run multiple tests - unattended
• Y.1564 (NetSAM) and RFC2544
• SLA-Tick (Service Level Agreement) and BERT
• Multi service (stream) test
• Simultaneous IPv4 and IPv6 support
• QinQ, Multiple VLAN and MPLS