UniPRO Gbis is a revolutionary tool for testing all types of G.SHDSL service. It combines a state-of-the-art DSL engine with a range of useful copper layer fault checks into a compact, hand-held, battery-powered tester.

Designed with the field engineer in mind, UniPRO Gbis provides the ultimate in ease of use, pinpinting common network faults and checking service performance directly from switchon with minimal setup. It supports the latest G.SHDSL standard, G.SHDSL.bis, as well as legacy versions of the technology, which are widely deployed for the provision of multi-pair DSL access to business applications. Up to 4 copper pairs can be tested simultaneously and can be bonded together using ATM (Asynchronous Transfer Mode) or EFM (Ethernet in First Mile) encapsulation to provide up to 22.784Mbps of symmetrical bandwidth.

UniPRO Gbis can be programmed with acceptance targets for the main G.SHDSL performance parameters, providing a simple Red/Green, Pass/Fail test. Results can be stored in the tester and simply uploaded to a USB memory stick for analysis and reporting in a PC environment.

With its optional CO (STU-C) emulation, UniPRO Gbis is equally useful in the Distribution Frame, at the street cabinet or in the customer’s premises.

Standard accessories

RPB00000 UniPRO Gbis (CPE only)

RPBCP000 UniPRO Gbis CO Plus (CPE + CO)

Mains PSU / charger with UK and Euro mains leads RJ-45 DSL cable

Plugs / clips DSL cable User guide on CD

Quick Reference Card (English / French) Carry bag

Recommended options

More products TREND NETWORKS

IDEAL INDUSTRIES LANXPLORER PLUS R150004 LAN CABLE AND WIFI NETWORK TESTER

• WIFI: Display of numbers of access points, available SSIDs, channels used and signal strength
• Generation of wiremaps
• Length measurement
• Recognition of PoE and PoE+ voltage
• Support of 10/100/1000 Ethernet
• Automatical DHCP recognition
• Variable Ping function for URL and IP adresses

IDEAL INDUSTRIES 33-928 FIBERMASTER OPTICAL FIBER TESTER KIT : POWERMETER + LIGHT SOURCE

• Power Meter: 850, 1300/1310, 1490 and 1550 wavelength measurement capability
• Light Source: 850 nm light source (33-928 kit)

IDEAL INDUSTRIES 33-960 OTDR FOR SM AND MM OPTICAL FIBER

• Quad OTDR with 850/1300/1310/1550nm
• Dynamic range [dB] : 24 / 25 / 32 / 30 dB
• Short Attenuatioand Event Dead Zones
• Fast Data Acquisition
• USB port
• Certifying OTDR Option-for tier-2 certification

IDEAL INDUSTRIES VDV-II R158000 CABLE VOICE VIDEO TESTER WIREMAPPER

• VDV II performs standard tests for copper cabling
• Coax, 6Pin (RJ11/12), 8Pin (RJ45) Connectors for Copper Cable Testing
• Wiremap for Miswires, Split Pairs, Shorts and Opens
• Analog Tone Generator
• Voltage Protection
• Shielded Cable Testing
• Single Screen Results

IDEAL INDUSTRIES SIGNALTEK II R156000 GIGABIT CABLE NETWORK TESTER

• Full Gigabit bi-directional load testing
• Additional Ethernet troubleshooting capabilities
• Wiremapping by pin as well as pair
• Reporting of test results
• Load test through hubs and switches

IDEAL INDUSTRIES SIGNALTEK CT R156004 GIGABIT DATA CABLE TRANSMISSION NETWORK TESTER

• Fast Autotest provides proof of network performance in seconds
• USB port enables rapid transfer of test results to memory stick
• Support for shielded and unshielded twisted pair cable including Cat 5e, Cat 6, Cat 6A and Cat 7 (TIA 568A and 568B wiring schemes)
• Stores up to 5000 tests to accommodate even the largest jobs
• Ability to identify and trace cables with a compatible inductive tone probe

NETWORK TRANSMISSION TESTER - SIGNALTEK NT

• Gigabit performance testing on passive cabling and active networks
• Generates test reports to IEEE 802.3ab standard
• Simulates VoIP/CCTV/Web/IP video network traffic
• Tests connection speed, port ID, ping, traceroute, IPv4/IPv6
• Advanced PoE/PoE+ testing

IDEAL INDUSTRIES 33-931 FIBERMASTER OPTICAL FIBER TESTER KIT : POWERMETER + LIGHT SOURCE

• Power Meter: 850, 1300/1310, 1490 and 1550 nm measurements
• Light Source: 850 /1300nm (LED) as well as 1310/1550nm (Laser)

IDEAL INDUSTRIES 33-929 FIBERMASTER OPTICAL SOURCE

• 850, 1300/1310, 1550 MM/SM light source meter
• Includes FC adapters
• Power LED - lights green when light source is active
• Docks in the bottom of the power meter for easy storage
• Operates on standard AAA batteries, (3)
• Low battery indication

IDEAL INDUSTRIES SIGNALTEK II FO R156001 GIGABIT CABLE AND OPTIC FIBER NETWORK TESTER

• Suitable for both copper and fibre
• Full Gigabit bi-directional load testing
• Additional Ethernet troubleshooting capabilities
• Wiremapping by pin as well as pair
• Reporting of test results
• Load test through hubs and switches