Brand: Hameg

Precision Programmmable Double Power Supply Hameg HMP2020

Code: Hameg HMP2020


 

Datasheet PDF, 0.54 Mb

Description

  • 1 x 0…32V/0…10A 1 x 0…32V/0…5A 188W max.
  • 188W Output Power realized by intelligent Power Management 
  • Low Residual Ripple: <150µVrms due to linear Post Regulators 
  • High Setting- and Read-Back Resolution of 1mV up to 0.1mA 
  • Galvanically isolated, earth-free and short circuit protected Output Channels 
  • Advanced Parallel- and Serial Operation via V/I Tracking 
  • EasyArb Function for free definable V/I Characteristics 
  • FuseLink: Individual Channel Combination of Electronic Fuses 
  • Free adjustable Overvoltage Protection (OVP) for all Outputs 
  • All Parameters clearly displayed via LCD/Glowing Buttons 
  • Rear Connectors for all Channels including Sense 
  • USB/RS-232 Interface, optional Ethernet/USB or IEEE-488 (GPIB)
 

Standard accessories

  • Line cord
  • Operating manual
  • CD
 

Recommended options

  • HO730 Dual-Interface Ethernet/USB
  • HO740 Interface IEEE-488 (GPIB), galvanically isolated
  • HZ10S 5 x silicone test lead (measurement connection in black)
  • HZ10R 5 x silicone test lead (measurement connection in red)
  • HZ10B 5 x silicone test lead (measurement connection in blue)
  • HZ13 Interface cable (USB) 1.8 m
  • HZ14 Interface cable (serial) 1:1
  • HZ42 2RU 19’’ Rackmount Kit
  • HZ72 GPIB-Cable 2 m
 

More products Hameg

ARBITRARY WAVEFORM GENERATOR 50 MHZ HAMEG HMF2550

• Frequency Range 10µHz…50MHz
• Output Voltage 5mVpp…10Vpp (into 50O) DC Offset ±5mV…5V
• Arbitrary Waveform Generator: 250MSa/s, 14Bit, 256kPts
• Sine, Square, Pulse, Triangle, Ramp, Arbitrary Waveforms incl. Standard Curves (white Noise, Cardiac etc.)

 

ARBITRARY FUNCTION GENERATOR 12.5 MHZ HAMEG HM8150

• Frequency Range 10mHz…12.5MHz
• Output Voltage 10mVpp…10Vpp (into 50O)
• Waveforms: Sine Wave, Square Wave, Triangle, Pulse, Sawtooth, Arbitrary
• Arbitrary Waveform Generator 40MSa/s

 

PEAK POWER METER 1MW..8KW HAMEG HM8115-2

• Wide Measurement Range 1mW…8kW
• Voltage Range 100mV…500V, Current Range 1mA…16A
• Frequency Range DC…1kHz
• Simultaneous Voltage, Current and Power Display
• Display of apparent, effective and reactive Power
• Power Factor Display

 

DIGITAL OSCILLOSCOPE 4 X 100 MHZ HAMEG HMO1024

• 100 MHz bandwidth
• 4 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
• 2 GSa/s sample rate on 2 channels, 1 GSa/s on 4 channels

 

DIGITAL OSCILLOSCOPE 2/4 CH. 300/400/500 MHZ HAMEG HMO3000

• HMO3032 2-Channel 300MHz 4GS/s 8Mpts
• HMO3034 4-Channel 300MHz 4GS/s 8Mpts
• HMO3042 2-Channel 400MHz 4GS/s 8Mpts
• HMO3044 4-Channel 400MHz 4GS/s 8Mpts
• HMO3052 2-Channel 500MHz 4GS/s 8Mpts
• HMO3054 4-Channel 500MHz 4GS/s 8Mpts

 

DIGITAL OSCILLOSCOPE 2 X 70 MHZ HAMEG HMO722

• 70 MHz bandwidth
• 2 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
• 2 GSa/s sample rate on 1 channel, 1 GSa/s on 2 channels

 

PRECISION TRIPLE POWER SUPPLY HAMEG HM7042-5

• 2 x 0…32V/0…2A 1 x 0…5.5V/0…5A
• High-Performance and inexpensive Laboratory Power Supply
• Floating, overload and short-circuit proof Outputs
• Display Resolution: 10mV/1mA at Channel 1+3; 10mV/10mA at Channel 2

 

SPECTRUM ANALYZER 100 KHZ..1.6GHZ HAMEG HMS1000/ HMS1010

• Frequency Range 100kHz…1.6GHz
• Tracking Generator HMS1010 -20…0dBm
• Amplitude Measurement Range -114…+20dBm
• DANL -135dBm with Preamp. Option HO3011
• Sweep Time 20ms…1,000s
• Resolution Bandwidth 100Hz…1MHz in 1-3 Steps, 200kHz (-3dB); additional 200Hz, 9kHz, 120kHz, 1MHz (-6dB)

 

ARBITRARY WAVEFORM GENERATOR 25 MHZ HAMEG HMF2525

• Frequency Range 10µHz…25MHz
• Output Voltage 5mVpp…10Vpp (into 50O) DC Offset ±5mV…5V
• Arbitrary Waveform Generator: 250MSa/s, 14Bit, 256kPts
• Sine, Square, Pulse, Triangle, Ramp, Arbitrary Waveforms incl. Standard Curves (white Noise, Cardiac etc.)

 

DIGITAL OSCILLOSCOPE 4 X 70 MHZ HAMEG HMO724

• 70 MHz bandwidth
• 4 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
• 2 GSa/s sample rate on 2 channels, 1 GSa/s on 4 channels