Brand: Hameg

Digital Oscilloscope 2 x 200 MHz Hameg HMO2022

Code: Hameg HMO2022


 

Datasheet PDF, 0.73 Mb

Description

  • 200 MHz bandwidth
  • 2 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
  • 2 GSa/s sample rate on 1 channel, 1 GSa/s on 2 channels
  • 2 MPts Memory, Memory Zoom up to 50,000:1 
  • Serial Bus Trigger and Hardware accelerated Decode, I2C, SPI, UART/RS-232 (Opt. HOO10, HOO11) 
  • 8 User definable Markers for easy Navigation 
  • Pass/Fail Test based on Masks 
  • Vertical Sensitivity 1 mV/div., Offset Control ±0.2...±20 V 
  • 12 div. x-Axis Display Range, 20 div. y-Axis Display Range (VirtualScreen) 
  • Trigger Modes: Slope, Video, Pulsewidth, Logic, Delayed, Event 
  • Component tester, 6 Digit Counter, Automeasurement, Formula Editor, Ratiocursor, FFT for Spectral Analysis 
  • Crisp 16.5 cm (6.5") TFT VGA Display, DVI Output 
  • Lowest Noise Fan 
  • 3 x USB for Mass Storage, Printer and Remote Control
  • optional IEEE-488 (GPIB) or Ethernet/USB
 

More products Hameg

DIGITAL OSCILLOSCOPE 2 X 200 MHZ HAMEG HMO2022

• 200 MHz bandwidth
• 2 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
• 2 GSa/s sample rate on 1 channel, 1 GSa/s on 2 channels

 

PRECISION PROGRAMMMABLE TRIPLE POWER SUPPLY HAMEG HMP2030

• 3 x 0…32V/0…5A 188W max.
• 188W Output Power realized by intelligent Power Management
• Low Residual Ripple: <150µVrms due to linear Post Regulators
• High Setting- and Read-Back Resolution of 1mV up to 0.1mA

 

DIGITAL OSCILLOSCOPE 2 X 100 MHZ HAMEG HMO1022

• 100 MHz bandwidth
• 2 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
• 2 GSa/s sample rate on 1 channel, 1 GSa/s on 2 channels

 

ARBITRARY WAVEFORM POWER SUPPLY HAMEG HM8143

• 2x 0…30V/0…2A 1x 5V/0…2A
• Display resolution 10mV/1mA
• Parallel (up to 6A) and Series (up to 65V) Operation
• Electronic load up to 60W per channel (max. 2A)
• Arbitrary waveform power supply (4096 points, 12 bit)

 

PEAK POWER METER 1MW..8KW HAMEG HM8115-2

• Wide Measurement Range 1mW…8kW
• Voltage Range 100mV…500V, Current Range 1mA…16A
• Frequency Range DC…1kHz
• Simultaneous Voltage, Current and Power Display
• Display of apparent, effective and reactive Power
• Power Factor Display

 

PRECISION TRIPLE POWER SUPPLY HAMEG HM7042-5

• 2 x 0…32V/0…2A 1 x 0…5.5V/0…5A
• High-Performance and inexpensive Laboratory Power Supply
• Floating, overload and short-circuit proof Outputs
• Display Resolution: 10mV/1mA at Channel 1+3; 10mV/10mA at Channel 2

 

TRIPLE POWER SUPPLY HAMEG HM8040-3

• 2 x 0…20V/0.5A 1 x 5V/1A
• 3-Digit switchable Displays (Display Resolution 0.1V/1mA)
• Pushbutton for Activating/Deactivating all Outputs
• Adjustable Current Limiting and Electronic Fuse

 

DIGITAL OSCILLOSCOPE 4 X 150 MHZ HAMEG HMO1524

• 150 MHz bandwidth
• 4 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
• 2 GSa/s sample rate on 2 channels, 1 GSa/s on 4 channels

 

DIGITAL OSCILLOSCOPE 2 X 70 MHZ HAMEG HMO722

• 70 MHz bandwidth
• 2 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
• 2 GSa/s sample rate on 1 channel, 1 GSa/s on 2 channels

 

UNIVERSAL DIGITAL FREQUENCY COUNTER 3 GHZ HAMEG HM8123

• Measurement Range 0Hz-3GHz
• 2 Measurement Inputs DC-200MHz, 1 Measurement Input 100MHz-3GHz
• Input Impedance A/B: 1MO/50O (switchable), Sensitivity 25mVrms
• Input Impedance C: 50O, Sensitivity 30mVrms
• 400 MHz Time Base with 0.5ppm Stability
• 10-Digit Resolution at 10s Gate Time