Brand: Hameg

Digital Oscilloscope 2 x 350 MHz Hameg HMO3522

Code: Hameg HMO3522


 

Datasheet PDF, 1.44 Mb

Description

  • 350 MHz bandwidth
  • 2 analog channels and MSO(Mixed Signal Opt.HO3508 [HO3516]) with 8 [16] Logic Channels 
  • 2  GSa/s sample rate on each channel, 4 GSa/s on half-channel
  • 2 MPts Memory on each channel, 4 MPts Memory on half-channel, Memory Zoom up to 100,000:1 
  • Serial Bus Trigger and Hardware accelerated Decode, I2C, SPI, UART/RS-232 (Opt. HOO10) 
  • 8 User definable Markers for easy Navigation 
  • Pass/Fail Test based on Masks 
  • Vertical Sensitivity 1mV/div., Offset Control ±0.2...±20V 
  • 12div. x-Axis Display Range, 20div. y-Axis Display Range (VirtualScreen) 
  • Trigger Modes: Slope, Video, Pulse width, Logic, Delayed, Event 
  • 6 Digit Counter, Automeasurement, Formula Editor, Ratiocursor, FFT for Spectral analysis 
  • Crisp 16.5cm (6.5") TFT VGA Display, DVI Output 
  • Lowest Noise Fan 
  • 3 x USB for Mass Storage, Printer and Remote Control, optional IEEE-488 (GPIB) or Ethernet/USB
 

More products Hameg

DIGITAL OSCILLOSCOPE 2 X 100 MHZ HAMEG HMO1022

• 100 MHz bandwidth
• 2 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
• 2 GSa/s sample rate on 1 channel, 1 GSa/s on 2 channels

 

DIGITAL OSCILLOSCOPE 2 X 150 MHZ HAMEG HMO1522

• 150 MHz bandwidth
• 2 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
• 2 GSa/s sample rate on 1 channel, 1 GSa/s on 2 channels

 

PROGRAMMABLE PRECISION QUADRUPLE POWER SUPPLY HAMEG HMP4040

• 4 x 0…32V/0…10A 384W max.
• 384W Output Power realized by intelligent Power Management
• Low Residual Ripple: <150µVrms due to linear Post Regulators
• High Setting- and Read-Back Resolution of 1mV up to 0.2mA

 

UNIVERSAL FREQUENCY COUNTER 1.6 GHZ HAMEG HM8021-4

• Measurement Range 0Hz…1.6GHz
• 10MHz Time Base with 1ppm Stability (TCXO)
• Input A: Input Impedance 1MO, Sensitivity 20mVrms
• Input C: Input Impedance 50O, Sensitivity 30mVrms
• 8-Digit Resolution for 10s Measuring Time

 

PRECISION TRIPLE POWER SUPPLY HAMEG HM7042-5

• 2 x 0…32V/0…2A 1 x 0…5.5V/0…5A
• High-Performance and inexpensive Laboratory Power Supply
• Floating, overload and short-circuit proof Outputs
• Display Resolution: 10mV/1mA at Channel 1+3; 10mV/10mA at Channel 2

 

FUNCTION GENERATOR 10 MHZ HAMEG HM8030-6

• Frequency Range 50mHz…10MHz
• Output Voltage up to 10Vpp (into 50O)
• Waveforms: Sine Wave, Triangle, Square Wave, Pulse, DC

 

DIGITAL OSCILLOSCOPE 4 X 70 MHZ HAMEG HMO724

• 70 MHz bandwidth
• 4 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
• 2 GSa/s sample rate on 2 channels, 1 GSa/s on 4 channels

 

PROGRAMMABLE PRECISION TRIPLE POWER SUPPLY HAMEG HMP4030

• 3 x 0…32V/0…10A 384W max.
• 384W Output Power realized by intelligent Power Management
• Low Residual Ripple: <150µVrms due to linear Post Regulators
• High Setting- and Read-Back Resolution of 1mV up to 0.2mA

 

PRECISION PROGRAMMABLE LCR-BRIDGE 200 KHZ HAMEG HM8118

• Basic Accuracy 0.05 %
• Measurement Functions L, C, R, |Z|, X, |Y|, G, B, D, Q, T, ?, M, N
• Test Frequencies 20Hz…200kHz
• Up to 12 Measurements per Second
• Parallel and Series Mode

 

TRIPLE POWER SUPPLY HAMEG HM8040-3

• 2 x 0…20V/0.5A 1 x 5V/1A
• 3-Digit switchable Displays (Display Resolution 0.1V/1mA)
• Pushbutton for Activating/Deactivating all Outputs
• Adjustable Current Limiting and Electronic Fuse