Brand: Hameg

Digital Oscilloscope 2 x 150 MHz Hameg HMO1522

Code: Hameg HMO1522


 

Datasheet PDF, 0.74 Mb

Description

  • 150 MHz bandwidth
  • 2 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
  • 2 GSa/s sample rate on 1 channel, 1 GSa/s on 2 channels
  • 2 MPts Memory, Memory Zoom up to 50,000:1 
  • Serial Bus Trigger and Hardware accelerated Decode, I2C, SPI, UART/RS-232 (Opt. HOO10, HOO11) 
  • 8 User definable Markers for easy Navigation 
  • Pass/Fail Test based on Masks 
  • Vertical Sensitivity 1 mV/div., Offset Control ±0.2...±20 V 
  • 12 div. x-Axis Display Range, 20 div. y-Axis Display Range (VirtualScreen) 
  • Trigger Modes: Slope, Video, Pulsewidth, Logic, Delayed, Event 
  • Component tester, 6 Digit Counter, Automeasurement, Formula Editor, Ratiocursor, FFT for Spectral Analysis 
  • Crisp 16.5 cm (6.5") TFT VGA Display, DVI Output 
  • Lowest Noise Fan 
  • 3 x USB for Mass Storage, Printer and Remote Control
  • optional IEEE-488 (GPIB) or Ethernet/USB
 

More products Hameg

PROGRAMMABLE PRECISION TRIPLE POWER SUPPLY HAMEG HMP4030

• 3 x 0…32V/0…10A 384W max.
• 384W Output Power realized by intelligent Power Management
• Low Residual Ripple: <150µVrms due to linear Post Regulators
• High Setting- and Read-Back Resolution of 1mV up to 0.2mA

 

PRECISION PROGRAMMABLE LCR-BRIDGE 200 KHZ HAMEG HM8118

• Basic Accuracy 0.05 %
• Measurement Functions L, C, R, |Z|, X, |Y|, G, B, D, Q, T, ?, M, N
• Test Frequencies 20Hz…200kHz
• Up to 12 Measurements per Second
• Parallel and Series Mode

 

DIGITAL OSCILLOSCOPE 4 X 100 MHZ HAMEG HMO1024

• 100 MHz bandwidth
• 4 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
• 2 GSa/s sample rate on 2 channels, 1 GSa/s on 4 channels

 

ANALOG OSCILLOSCOPE 2 X 40 MHZ HAMEG HM400

• 40 MHz bandwidth
• 2 analog channels
• Time Base 100ns/div."¦0.2s/div., with X magnification to 10ns/div

 

PRECISION PROGRAMMMABLE TRIPLE POWER SUPPLY HAMEG HMP2030

• 3 x 0…32V/0…5A 188W max.
• 188W Output Power realized by intelligent Power Management
• Low Residual Ripple: <150µVrms due to linear Post Regulators
• High Setting- and Read-Back Resolution of 1mV up to 0.1mA

 

DIGITAL OSCILLOSCOPE 2 X 100 MHZ HAMEG HMO1022

• 100 MHz bandwidth
• 2 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
• 2 GSa/s sample rate on 1 channel, 1 GSa/s on 2 channels

 

DIGITAL OSCILLOSCOPE 2 X 150 MHZ HAMEG HMO1522

• 150 MHz bandwidth
• 2 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
• 2 GSa/s sample rate on 1 channel, 1 GSa/s on 2 channels

 

PRECISION PROGRAMMMABLE DOUBLE POWER SUPPLY HAMEG HMP2020

• 1 x 0…32V/0…10A 1 x 0…32V/0…5A 188W max.
• 188W Output Power realized by intelligent Power Management
• Low Residual Ripple: <150µVrms due to linear Post Regulators
• High Setting- and Read-Back Resolution of 1mV up to 0.1mA

 

PEAK POWER METER 1MW..8KW HAMEG HM8115-2

• Wide Measurement Range 1mW…8kW
• Voltage Range 100mV…500V, Current Range 1mA…16A
• Frequency Range DC…1kHz
• Simultaneous Voltage, Current and Power Display
• Display of apparent, effective and reactive Power
• Power Factor Display

 

DIGITAL PROGRAMMABLE MULTIMETER 4.75 DIGIT HAMEG HM8012

• 4¾-Digit Display with 50,000 Counts
• Basic Accuracy 0.05%
• Max. Resolution: 10µV, 0.01dBm, 10nA, 10mO, 0.1°C
• RS-232 Interface and Software included