Brand: Hameg

Spectrum Analyzer 100 kHz..1.6GHz Hameg HMS1000/ HMS1010

Code: Hameg HMS1000/ HMS1010


 

Datasheet PDF, 0.93 Mb

Description

  • Frequency Range 100kHz…1.6GHz
  • Tracking Generator HMS1010 -20…0dBm
  • Amplitude Measurement Range -114…+20dBm
  • DANL -135dBm with Preamp. Option HO3011
  • Sweep Time 20ms…1,000s
  • Resolution Bandwidth 100Hz…1MHz in 1-3 Steps, 200kHz (-3dB); additional 200Hz, 9kHz, 120kHz, 1MHz (-6dB)
  • Spectral Purity <-100dBc/Hz (@100kHz)
  • Video Bandwidth 10Hz…1MHz in 1-3 Steps
  • Integrated AM and FM Demodulator (Phone and int. Speaker)
  • Detectors: Auto-, Min-, Max-Peak, Sample, RMS, Quasi-Peak
  • 8 Marker with Delta Marker, miscellaneous Peak Functions
  • Crisp 16.5cm (6.5") TFT VGA Display, DVI Output
  • 3 x USB for Mass-Storage, Printer and Remote Control, optional IEEE-488 (GPIB) or Ethernet/USB Dual-Interface
 

Standard accessories

  • Line cord
  • Operating manual
  • HZ21 Adapter plug
  • N-plug to BNC socket (2x HMS1010/3010)
  • CD
  • Software
 

Recommended options

  • HO730 Dual-Interface Ethernet/USB
  • HO740 Interface IEEE-488 (GPIB), galvanically isolated
  • HO3011 Preamplifier -135 dBm DANL (100 Hz RBW)
  • HZ13 Interface cable (USB) 1.8 m
  • HZ14 Interface cable (serial) 1:1
  • HZ20 Adapter, BNC to 4 mm banana
  • HZ33 Test cable 50 O, BNC/BNC, 0.5 m
  • HZ34 Test cable 50 O, BNC/BNC, 1.0 m
  • HZ46 4RU 19" Rackmount Kit
  • HZ72 GPIB-Cable 2 m
  • HZ99 Carrying Case for protection and transport
  • HZ520 Plug-in Antenna with BNC connection
  • HZ525 50 O-Termination, N plug
  • HZ530 Near-Field Probe Set 1 GHz for EMI diagnostics
  • HZ540/550 Near-Field Probe Set 3 GHz for EMI diagnostics
  • HZ540L/550L Near-Field Probe Set 3 GHz for EMI diagnostics
  • HZ547 3 GHz VSWR Bridge for HMS1010, HMS3010
  • HZ560 Transient limiter
  • HZ575 75/50 O Converter
  • HZO30 Active probe 1 GHz (0.9 pF, 1 MO, including many accessories)
 

More products Hameg

DC POWER SUPPLY MAINFRAME UNIT FOR HAMEG 8000 SERIES

• Basic Unit for Modules of the Modular System Series 8000
• Power Supply for 2 Modules
• DC Voltages electronically regulated, floating and short-circuit proof
• Power Transformer with thermal Fuse

 

DIGITAL OSCILLOSCOPE 4 X 70 MHZ HAMEG HMO724

• 70 MHz bandwidth
• 4 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
• 2 GSa/s sample rate on 2 channels, 1 GSa/s on 4 channels

 

DIGITAL OSCILLOSCOPE 4 X 150 MHZ HAMEG HMO1524

• 150 MHz bandwidth
• 4 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
• 2 GSa/s sample rate on 2 channels, 1 GSa/s on 4 channels

 

ARBITRARY WAVEFORM GENERATOR 25 MHZ HAMEG HMF2525

• Frequency Range 10µHz…25MHz
• Output Voltage 5mVpp…10Vpp (into 50O) DC Offset ±5mV…5V
• Arbitrary Waveform Generator: 250MSa/s, 14Bit, 256kPts
• Sine, Square, Pulse, Triangle, Ramp, Arbitrary Waveforms incl. Standard Curves (white Noise, Cardiac etc.)

 

PROGRAMMABLE PRECISION QUADRUPLE POWER SUPPLY HAMEG HMP4040

• 4 x 0…32V/0…10A 384W max.
• 384W Output Power realized by intelligent Power Management
• Low Residual Ripple: <150µVrms due to linear Post Regulators
• High Setting- and Read-Back Resolution of 1mV up to 0.2mA

 

PRECISION PROGRAMMMABLE DOUBLE POWER SUPPLY HAMEG HMP2020

• 1 x 0…32V/0…10A 1 x 0…32V/0…5A 188W max.
• 188W Output Power realized by intelligent Power Management
• Low Residual Ripple: <150µVrms due to linear Post Regulators
• High Setting- and Read-Back Resolution of 1mV up to 0.1mA

 

LCR-METER 25 KHZ HAMEG HM8018

• Measurement Functions: L, C, R, T, Q/D, |Z|
• Basic Accuracy 0.2%
• 5 Measurement Frequencies: 100Hz, 120Hz, 1kHz, 10kHz, 25kHz
• Max. Resolution: 0.001O, 0.001pF, 0.01µH

 

PROGRAMMABLE PRECISION TRIPLE POWER SUPPLY HAMEG HMP4030

• 3 x 0…32V/0…10A 384W max.
• 384W Output Power realized by intelligent Power Management
• Low Residual Ripple: <150µVrms due to linear Post Regulators
• High Setting- and Read-Back Resolution of 1mV up to 0.2mA

 

SPECTRUM ANALYZER 100 KHZ..1.6GHZ HAMEG HMS1000/ HMS1010

• Frequency Range 100kHz…1.6GHz
• Tracking Generator HMS1010 -20…0dBm
• Amplitude Measurement Range -114…+20dBm
• DANL -135dBm with Preamp. Option HO3011
• Sweep Time 20ms…1,000s
• Resolution Bandwidth 100Hz…1MHz in 1-3 Steps, 200kHz (-3dB); additional 200Hz, 9kHz, 120kHz, 1MHz (-6dB)

 

SPECTRUM ANALYZER 100KHZ..1.6GHZ HAMEG HMS1000E

• Frequency Range 100kHz…1.6GHz
• Amplitude Measurement Range -104…+20dBm
• Sweep Time 20ms…1,000s
• Resolution Bandwidth 10kHz…1MHz in 1-3 Steps, 200kHz (-3dB)
• Spectral Purity <-100dBc/Hz (@100kHz)
• Video Bandwidth 1kHz…1MHz in 1-3 Steps
• Integrated AM and FM Demodulator (Phone and int. Speaker)