70 MHz bandwidth
2 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
2 GSa/s sample rate on 1 channel, 1 GSa/s on 2 channels
2 MPts Memory, Memory Zoom up to 50,000:1
Serial Bus Trigger and Hardware accelerated Decode, I2C, SPI, UART/RS-232 (Opt. HOO10, HOO11)
8 User definable Markers for easy Navigation
Pass/Fail Test based on Masks
Vertical Sensitivity 1 mV/div., Offset Control �±0.2...�±20 V
12 div. x-Axis Display Range, 20 div. y-Axis Display Range (VirtualScreen)
Trigger Modes: Slope, Video, Pulsewidth, Logic, Delayed, Event
Component tester, 6 Digit Counter, Automeasurement, Formula Editor, Ratiocursor, FFT for Spectral Analysis
Crisp 16.5 cm (6.5"�) TFT VGA Display, DVI Output
Lowest Noise Fan
3 x USB for Mass Storage, Printer and Remote Control
optional IEEE-488 (GPIB) or Ethernet/USB

More products Hameg

Brand: Hameg

PRECISION PROGRAMMMABLE DOUBLE POWER SUPPLY HAMEG HMP2020

• 1 x 0�32V/0�10A 1 x 0�32V/0�5A 188W max.
• 188W Output Power realized by intelligent Power Management
• Low Residual Ripple: <150µVrms due to linear Post Regulators
• High Setting- and Read-Back Resolution of 1mV up to 0.1mA

Brand: Hameg

SPECTRUM ANALYZER 100 KHZ..1.6GHZ HAMEG HMS1000/ HMS1010

• Frequency Range 100kHz�1.6GHz
• Tracking Generator HMS1010 -20�0dBm
• Amplitude Measurement Range -114�+20dBm
• DANL -135dBm with Preamp. Option HO3011
• Sweep Time 20ms�1,000s
• Resolution Bandwidth 100Hz�1MHz in 1-3 Steps, 200kHz (-3dB); additional 200Hz, 9kHz, 120kHz, 1MHz (-6dB)

Brand: Hameg

PROGRAMMABLE PRECISION QUADRUPLE POWER SUPPLY HAMEG HMP4040

• 4 x 0�32V/0�10A 384W max.
• 384W Output Power realized by intelligent Power Management
• Low Residual Ripple: <150µVrms due to linear Post Regulators
• High Setting- and Read-Back Resolution of 1mV up to 0.2mA

Brand: Hameg

UNIVERSAL DIGITAL FREQUENCY COUNTER 3 GHZ HAMEG HM8123

• Measurement Range 0Hz-3GHz
• 2 Measurement Inputs DC-200MHz, 1 Measurement Input 100MHz-3GHz
• Input Impedance A/B: 1MO/50O (switchable), Sensitivity 25mVrms
• Input Impedance C: 50O, Sensitivity 30mVrms
• 400 MHz Time Base with 0.5ppm Stability
• 10-Digit Resolution at 10s Gate Time

Brand: Hameg

DIGITAL OSCILLOSCOPE 4 X 250 MHZ HAMEG HMO2524

• 250 MHz bandwidth
• 4 analog channels and MSO(Mixed Signal Opt.HO3508 [HO3516]) with 8 [16] Logic Channels
• 1.25 GSa/s sample rate on 4 channels, 2.5GSa/s on 2 channels

Brand: Hameg

TRIPLE POWER SUPPLY HAMEG HM8040-3

• 2 x 0�20V/0.5A 1 x 5V/1A
• 3-Digit switchable Displays (Display Resolution 0.1V/1mA)
• Pushbutton for Activating/Deactivating all Outputs
• Adjustable Current Limiting and Electronic Fuse

Brand: Hameg

PRECISION TRIPLE POWER SUPPLY HAMEG HM7042-5

• 2 x 0�32V/0�2A 1 x 0�5.5V/0�5A
• High-Performance and inexpensive Laboratory Power Supply
• Floating, overload and short-circuit proof Outputs
• Display Resolution: 10mV/1mA at Channel 1+3; 10mV/10mA at Channel 2

Brand: Hameg

PROGRAMMABLE PRECISION TRIPLE POWER SUPPLY HAMEG HMP4030

• 3 x 0�32V/0�10A 384W max.
• 384W Output Power realized by intelligent Power Management
• Low Residual Ripple: <150µVrms due to linear Post Regulators
• High Setting- and Read-Back Resolution of 1mV up to 0.2mA

Brand: Hameg

ANALOG OSCILLOSCOPE 2 X 100 MHZ HAMEG COMBISCOPE HM1008-2

• 100 MHz bandwith CombiScope�® with FFT
• 2 analog channels
• 1GSa/s Real Time Sampling, 10GSa/s Random Sampling
• 1MPts Memory per Channel, Memory Zoom up to 40,000:1

Brand: Hameg

ARBITRARY WAVEFORM POWER SUPPLY HAMEG HM8143

• 2x 0�30V/0�2A 1x 5V/0�2A
• Display resolution 10mV/1mA
• Parallel (up to 6A) and Series (up to 65V) Operation
• Electronic load up to 60W per channel (max. 2A)
• Arbitrary waveform power supply (4096 points, 12 bit)