Brand: Hameg

Digital Oscilloscope 4 x 350 MHz Hameg HMO3524

Code: Hameg HMO3524


 

Datasheet PDF, 1.44 Mb

Description

  • 350 MHz bandwidth
  • 4 analog channels and MSO(Mixed Signal Opt.HO3508 [HO3516]) with 8 [16] Logic Channels 
  • 2  GSa/s sample rate on each channel, 4 GSa/s on half-channel
  • 2 MPts Memory on each channel, 4 MPts Memory on half-channel, Memory Zoom up to 100,000:1 
  • Serial Bus Trigger and Hardware accelerated Decode, I2C, SPI, UART/RS-232 (Opt. HOO10) 
  • 8 User definable Markers for easy Navigation 
  • Pass/Fail Test based on Masks 
  • Vertical Sensitivity 1mV/div., Offset Control ±0.2...±20V 
  • 12div. x-Axis Display Range, 20div. y-Axis Display Range (VirtualScreen) 
  • Trigger Modes: Slope, Video, Pulse width, Logic, Delayed, Event 
  • 6 Digit Counter, Automeasurement, Formula Editor, Ratiocursor, FFT for Spectral analysis 
  • Crisp 16.5cm (6.5") TFT VGA Display, DVI Output 
  • Lowest Noise Fan 
  • 3 x USB for Mass Storage, Printer and Remote Control, optional IEEE-488 (GPIB) or Ethernet/USB
 

More products Hameg

DIGITAL OSCILLOSCOPE 4 X 70 MHZ HAMEG HMO724

• 70 MHz bandwidth
• 4 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
• 2 GSa/s sample rate on 2 channels, 1 GSa/s on 4 channels

 

DIGITAL OSCILLOSCOPE 2 X 100 MHZ HAMEG HMO1022

• 100 MHz bandwidth
• 2 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
• 2 GSa/s sample rate on 1 channel, 1 GSa/s on 2 channels

 

PROGRAMMABLE PRECISION QUADRUPLE POWER SUPPLY HAMEG HMP4040

• 4 x 032V/010A 384W max.
• 384W Output Power realized by intelligent Power Management
• Low Residual Ripple: <150µVrms due to linear Post Regulators
• High Setting- and Read-Back Resolution of 1mV up to 0.2mA

 

DIGITAL OSCILLOSCOPE 4 X 100 MHZ HAMEG HMO1024

• 100 MHz bandwidth
• 4 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
• 2 GSa/s sample rate on 2 channels, 1 GSa/s on 4 channels

 

PEAK POWER METER 1MW..8KW HAMEG HM8115-2

• Wide Measurement Range 1mW8kW
• Voltage Range 100mV500V, Current Range 1mA16A
• Frequency Range DC1kHz
• Simultaneous Voltage, Current and Power Display
• Display of apparent, effective and reactive Power
• Power Factor Display

 

DIGITAL OSCILLOSCOPE 4 X 250 MHZ HAMEG HMO2524

• 250 MHz bandwidth
• 4 analog channels and MSO(Mixed Signal Opt.HO3508 [HO3516]) with 8 [16] Logic Channels
• 1.25 GSa/s sample rate on 4 channels, 2.5GSa/s on 2 channels

 

SPECTRUM ANALYZER 100 KHZ..1.6GHZ HAMEG HMS1000/ HMS1010

• Frequency Range 100kHz1.6GHz
• Tracking Generator HMS1010 -200dBm
• Amplitude Measurement Range -114+20dBm
• DANL -135dBm with Preamp. Option HO3011
• Sweep Time 20ms1,000s
• Resolution Bandwidth 100Hz1MHz in 1-3 Steps, 200kHz (-3dB); additional 200Hz, 9kHz, 120kHz, 1MHz (-6dB)

 

ANALOG OSCILLOSCOPE 2 X 40 MHZ HAMEG HM400

• 40 MHz bandwidth
• 2 analog channels
• Time Base 100ns/div."0.2s/div., with X magnification to 10ns/div

 

PRECISION PROGRAMMMABLE DOUBLE POWER SUPPLY HAMEG HMP2020

• 1 x 032V/010A 1 x 032V/05A 188W max.
• 188W Output Power realized by intelligent Power Management
• Low Residual Ripple: <150µVrms due to linear Post Regulators
• High Setting- and Read-Back Resolution of 1mV up to 0.1mA

 

UNIVERSAL DIGITAL FREQUENCY COUNTER 3 GHZ HAMEG HM8123

• Measurement Range 0Hz-3GHz
• 2 Measurement Inputs DC-200MHz, 1 Measurement Input 100MHz-3GHz
• Input Impedance A/B: 1MO/50O (switchable), Sensitivity 25mVrms
• Input Impedance C: 50O, Sensitivity 30mVrms
• 400 MHz Time Base with 0.5ppm Stability
• 10-Digit Resolution at 10s Gate Time