Multimetru digital portabil profesional de precizie Metrel MD 9060

Cod: Metrel MD-9060 MD9060


 

Brosura produs PDF, 0.24 Mb
 

Descriere

The MD 9060 ranks among the most accurate multimeters with a large bandwidth and very high resolution. Metrel MD 9060 is equipped with a built-in VFD feature that makes the instrument capable of measuring the true values in accordance with frequency, large 2-line 500.000 counts LCD display, fast data acquisition and transfer (via optical interface), CAT IV / 1000 V, TRMS current and voltage measurement, conductance measurement and fast one-handed operation. MD 9060 has a wide range of extra features, including data hold, memory, min / max, average, differential, peak, peak / peak with extra fast 1ms response time, auto power off, frequency filter, reset and relative function. The MD 9060 is the ideal choice for demanding measurement tasks in industry, in the laboratories and in everyday repair and maintenance practice.

 

 

TEST FUNCTIONS

  • TRMS AC, DC voltage measurement;
  • TRMS AC, DC current measurement;
  • Capacitance measurement;
  • Resistance measurement;
  • Diode test;
  • Mains supply frequency measurement;
  • Frequency of digital signals measurement;
  • Continuity test (acoustic signaling);
  • Conductance measurement;
  • Temperature measurement.

 

TECHNICAL DATA

Dimensions (w x h x l): 103 x 64,5 x 208 mm

Mass (without accessories): 635 g

 

Accesorii standard

MD 9060 Standard set

  • Multimeter MD 9060 with rubber holster
  • Test lead with probe, 2 pcs
  • Thermocouple probe, type K
  • 9 V battery,
  • Instruction manual
  • Warranty
 

Alte produse METREL

MICROOHMETRU INALTA PRECIZIE 100A METREL MI 3252

• Resistance measurement: wide measuring range (1 nO ... 20 O)
• adjustable test current (100 mA ... 100 A)
• Voltage drop measurement
• Bar graph: on screen resistance bar graph
• protection level (CAT IV, 50 V)
• Portable
• High protection degree: IP 64.
• Accurate: 1 nO best resolution with 0.25% accuracy
• Custom limits: the limits can be set for PASS or FAIL evaluation of test result.
• Battery powered
• Downloadable: downloads test results via RS232 or USB cable directly to the PC with the help of the software.

 

PLATFORMA PENTRU DEMONSTRAREA PANOURILOR DE INTRERUPATOARE SI COMUTATOARE ELECTRICE IN SISTEME MONO SI TRIFAZATE METREL MI 3099 DEMO

• Switchboard and on Circuit side
• supporting one and three phase system
• RCD can be simulated
• TN-C(S) or TT type of earthing system on electrical installation

 

TESTER IMPEDANTA LINIE SI BUCLA INTRERUPTA RETEA ELECTRICA LA CURENTI INALTI METREL A 1143 EURO Z 290 A

• High precision line impedance;
• High precision fault loop impedance;
• Contact voltage.
• Range widening: adapts the instruments to read from 0.1 m? up to 19.99 ?.
• Multi-system testing: works on both single phase and 3-phase systems (110 V to 440 V).

 

TESTER REZISTENTA IZOLATIE LA 2500V INSTALATII ELECTRICE METREL MI 3102H CL EUROTEST XE 2.5KV

• Insulation resistance with up to 2500V DC voltage
• PI, DAR calculation
• Continuity of PE conductors with 200 mA test current with polarity change
• Continuity of PE conductors with 7 mA test current (continuous measurement) without RCD tripping
• Line impedance
• Loop impedance
• Loop impedance with Trip Lock RCD function
• TRMS voltage and frequency

 

MEGOHMMETRU REZISTENTA IZOLATIE 2500V SI CONTINUITATE METREL MI 3121H SMARTEC 2.5KV

• Insulation resistance up to 100 GO with DC voltage up to 2.5 kV;
• PI, DAR calculation;
• Continuity of PE conductors with 200 mA test current and polarity change;
• Continuity of PE conductors with 7 mA test current (continuous measurement) without RCD tripping;
• TRMS voltage and frequency.

 

PLATFORMA SIMULARE INSTALATIE ELECTRICA REZIDENTIALA METREL MI 2166 DEMO

• Simulation of common electrical installation usually met in an individual house or apartment
• Various test methods supported by different test instruments can be presented.
• Acceptable or faulty parameters can be preset by five »fault« switches.
• Some real elements of electrical installation are placed on the front panel like RCD protection device, ON/OFF switch

 

TESTER MULTIFUNCTIONAL ECHIPAMENTE ELECTRICE PORTABILE METREL MI 3309 DELTAGT

• Functional and visual inspection
• Earth bond resistance
• Insulation resistance
• Insulation resistance of isolated accessible conductive parts
• Substitute leakage current
• Substitute leakage current of isolated accessible conductive parts
• Differential leakage current test
• Touch leakage test
• PRCD test

 

PLATFORMA PREZENTARE SECURITATE INSTALATII ELECTRICE METREL MI 3300 PAT DEMO

• PAT Demoboard is intended for demonstration of electrical equipment safety management.
• Presentation of safety management of electrical equipment in seminars, courses.
• Presentation of typical safety problems on electrical equipment.
• Practical demonstration of measuring instruments (performing tests, making right connections, analysing measured results).
• Continuity of equipotential bonding
• Insulation resistance
• Leakage current
• Touch leakage current
• Polarity of cables
• Functional operation

 

TESTER SECURITATE ECHIPAMENTE ELECTRICE CF. STANDARD IEC EN VDE METREL MI 3305 OMEGAGT PLUS

• Continuity tests (200 mA, 4 A, 10 A, 25 A).
• Insulation resistance.
• Substitute leakage current.
• Differential leakage current.
• Touch leakage current.
• IEC cord polarity test.
• Leakage and load TRMS current measurement with current clamp.

 

CLESTE AMPERMETRIC CURENTI SLABI DE SCURGERE IMPAMANTARE METREL MD 9270

• TRMS AC voltage and current measurement.
• Frequency measurement.
• Power: measures various power parameters (active, reactive, apparent power, THD, PF, phase displacement).
• Intelligent loss analysis: complex algorithms detect loss and allow determining possible reasons for current loss.
• Harmonics: measures current or voltage harmonic components and a percentage value of a harmonic up to the 49th.
• Total Harmonic Distortion (THD)
• Power Factor (PF).