The MD 9050 ranks among the best multimeters on the market. High resolution and accuracy, 2-line LCD display, fast data acquisition and transfer (via optical interface), CAT IV/1000 V, TRMS current and voltage measurement, non-contact voltage detector, conductance measurement, etc.

TEST FUNCTIONS

TRMS DC and AC voltage up to 1000 V
TRMS DC and AC current measurement up to 10 A
Diode test
Resistance measurement
Continuity test
Frequency measurement
Capacitance measurement
Temperature measurement

DATA

Dimensions (w x h x l): 103 x 64,5 x 208 mm

Mass (without accessories): 635 g

Accesorii standard

MD 9050 Standard set

Multimeter MD 9050 with rubber holster
2 test leads
Thermocouple probe, type K
Battery
User manual
Warranty

Alte produse METREL

ADAPTOR ACTIV TRIFAZIC TESTARE POLARITATE, PUTERE, SI RCD METREL A 1322

• All tests on 3-phase electrical equipment can be carried out, including live leakage test, power, polarity, RCD and Active polarity.
• Simple connection to the PAT/MACHINE tester with automatic detection.
• Simple test procedures, identical to single phase equipment.
• Test sequence for 3-phase tests are automatically set, based on entered test codes and input voltages.

CLESTE AMPERMETRIC INDUSTRIAL DE UZ GENERAL METREL MD 9230

• DC and TRMS AC voltage up to 600 V
• DC and TRMS AC current measurement up to 1000 A and 800 A respectively
• Resistance measurement
• Continuity test
• Diode test
• Capacitance measurement

MICROHMETRU PORTABIL REZISTENTE MICI 2A METREL MI 3242

• Bidirectional resistance measurement from 1 µO up to 199,9 O
• test current up to 2 A
• High overvoltage protection (CAT III / 600 V)
• Internal protection cicuit
• 50 Hz / 60 Hz ripple detection and rejection.
• more than 800 measurements of 500 mO load 8 2 A test current & 15 s measurement duration
• Pre-programmed limits with PASS/FAIL evaluation of measurement result
• Up to 1500 test results with timestamp can be stored in internal memory.
• PC SW HVLink PRO enables downloading, review, analyses and printing of test results.

LOCATOR TRASEE CABLURI METREL MI 2093 LINE TRACER

• Field proven instrument for under-wall low voltage installation tracing
• fuse finding
• short-circuit spot determination and metal installation tracing
• Can be used on energized or voltage-free systems.
• Tips and detailed descriptions of connection schemes for various combinations from everyday practice.

LOCATOR TRASEE CABLURI METREL MI 2093 LINE TRACER

MEGOHMMETRU REZISTENTA IZOLATIE, CONTINUITATE, IMPAMANTARE METREL MI 3101 EUROTEST AT

• DC insulation resistance,
• PE conductor continuity test,
• Line and Loop resistances with Fuse evaluation table built-in, RCD test with Trip lock function,
• phase sequence in 3-phase systems,
• on-line voltage monitor,
• 2-wire and 3-wire Earth resistance test with built-in battery operated generator.

TESTER INSTALATII ELECTRICE 1000V METREL MI 3100 EUROTEST EASI

• DC insulation resistance,
• PE conductor continuity test,
• Line and Loop resistances with Fuse characteristics inside the instrument,
• RCD test with Trip lock function,
• phase sequence in 3-phase systems,
• on-line voltage monitor.

TESTER INSTALATII ELECTRICE ELECTRICIAN METREL MI 2150 INSTALLCHECK

• Wiring check
• DC insulation resistance
• Continuity test
• Line and Loop resistance
• RCD test
• Phase sequence
• Pass/Fail visual and audio presentation of results

CLESTE AMPERMETRIC CURENTI SLABI DE SCURGERE IMPAMANTARE METREL MD 9270

• TRMS AC voltage and current measurement.
• Frequency measurement.
• Power: measures various power parameters (active, reactive, apparent power, THD, PF, phase displacement).
• Intelligent loss analysis: complex algorithms detect loss and allow determining possible reasons for current loss.
• Harmonics: measures current or voltage harmonic components and a percentage value of a harmonic up to the 49th.
• Total Harmonic Distortion (THD)
• Power Factor (PF).

TESTER RCD CURENTI DE SCURGERE SCURTCIRCUIT DISJUNCTOARE SI INTRERUPATOARE METREL MI 3122 SMARTEC Z

• Loop impedance / prospective fault current
• Line impedance / prospective short-circuit current
• Built-in fuse characteristics for quick evaluation of measuring results
• RCD tests (trip out time, contact voltage, ramp test, Autotest)
• Testing on 1- and 3-phase systems
• Phase sequence test