DCP42 is a 160W Switching Power Supply. Single Output Continuous Switching Power Supply with USB offers high efficiency electrical power conversion for greater energy conservation and lighter weight. Complete with power cord, software, and USB cable. Software includes DC ramp and waveform generator.

Features:

Constantly calculates and adjusts the Voltage and Current limit points according to available maximum power (160W)
At maximum current (10A), voltage is limited to 16V
At maximum voltage (42V), current is limited to 3.8A
Dual action rotary encoder control with push knob for fine and coarse tuning
Remote control for Programming, Output Voltage/Current, and ON/OFF using supplied software, driver, and USB
Three on-board user-defined Voltage/Current presets
Store 20 presets with up to 999 cycles each on a PC via USB and supplied Software
Software also includes DC Ramp and Waveform Generator
Complete with power cord, software, and USB cable

Alte produse EXTECH

EXTECH MN30 MULTIMETRU TRUE RMS AUTOSENSING™ + NCV

• True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms
• Unique smart AutoSensing feature
• Built-in Non-Contact Voltage (NCV) detector
• Convenient built-in LED Flashlight
• Audible Continuity tester

EXTECH EX810 CELSTE AMPERMETRIC 1000A AC CLAMP METER CU TERMOMETRU INFRAROSU

• Non-contact InfraRed Temperature measurements with laser pointer
• Peak hold captures inrush currents and Transients
• MultiMeter functions include AC/DC Voltage, AC Current, Resistance, Capacitance, Frequency, Diode, and Continuity
• 1.7" (43mm) jaw opening for conductors up to 750MCM or two 500MCM
• 4000 count backlit display
• Autoranging with manual range button

CONDUCTOMETRU PORTABIL - EXTECH EC210

• Conductometru portabil compact pentru determinare:
•
• conductivitate
• total solide dizolvate TDS
• temperatura

EXTECH 401027 LUXMETRU MINI PORTABIL

• Easy to operate Foot candle light meter with 2 ranges
• Convenient pocket size design
• Overrange indication

EXTECH LT45 LUXMETRU COLOR LED

• Measure White, Red, Yellow, Green, and Blue LED and Standard Lighting in Lux or Foot-Candle (Fc) units
• Manually store/recall up to 99 readings
• 4000 count LCD display
• Cosine and color corrected measurements
• Min/Max Average and Auto Power Off
• Complete with light sensor with protective cover and coiled cable expandable to 59" (1.5m), 9V battery, and hard carrying case

CLORIMETRU PENTRU MASURARE CL LIBER SI CL TOTAL - EXTECH CL500

• Clorimetru pentru masurare Cl liber si Cl total - Extech CL500
• Extech CL500 este utilizat pentru a masura atat Cl liber cat si Cl total pina la 3.5 ppm cu rezolutie de 0.01ppm.
•
• Metoda utilizata este adaptata din metoda USEPA 330.5 pentru ape reziduale si metoda standard 4500-Cl-G pentru apa potabila.

EXTECH DL160 INREGISTRATOR DATALOGGING CU 2 CANALE TENSIUEN SI CURENT AC TRUE RMS

• Simultaneously measure two AC Voltage inputs or two AC Current inputs or one AC Voltage and one AC Current input
• Readings can be downloaded to your PC via the USB interface and analyzed using the included software or exported to a spreadsheet
• LCD indicates time/date, current readings and Min/Max
• Auto Power off and battery check

EXTECH PQ3350-3 ANALIZOR PUTERE SI ARMONICI 3 FAZE

• Datalogging of single and 3-phase/3-wire or 3-phase/4-wire systems (up to 52,428 single phase readings or 17,476 3-phase readings)
• Flexible clamp probes can be used for wrapping around bus bars and wire bundles
• Large backlighting LCD displays up to 35 parameters in one screen
• Clamp-on True RMS power measurements with on-screen Harmonics display
• Simultaneous display of Harmonics and Waveform

EXTECH CT80 TESTER AFCI, GFCI AND AC CIRCUIT ANALYZER

• Selectable loads of 12, 15 and 20 Amps
• Measures loaded and unloaded AC Line Voltage
• Calculates and displays % Voltage Drop and Line Impedance
• Displays Peak Line Voltage and Frequency

EXTECH DL150 INREGISTRATOR DATALOGGER DE TENSIUNE AC TRUE RMS

• Measure True RMS AC Voltage (600V) or Current (200A)
• Readings can be downloaded to your PC via the USB interface and analyzed using the included software or exported to a spreadsheet
• LCD indicates time/date, current readings and Min/Max
• Normal, Peak and Capture (user-specified trigger level) recording modes