Circuit and wiring issues can introduce shock hazards (from grounding issues) and can compromise performance of machinery and equipment (from poor ground impedance, lack of sufficient voltage under load and/or high ground-to-neutral voltage). The CT80 is a GFCI and AC Circuit Analyzer which covers outlet load handling and outlet tester functions. Complete with AC test cord (standard North American 3-prong plug).

Features:

Outlet Tester functions:
- AFCI
- GFCI Trip Current
- GFCI Trip Time
- EPD Trip Current
- Neutral to Ground Voltage
- Hot, Neutral and Ground Impedance
- Open or Reversed wiring
AC Load Tester:
- Selectable loads of 12, 15 and 20 Amps
- Measures loaded and unloaded AC Line Voltage
- Calculates and displays % Voltage Drop and Line Impedance
- Displays Peak Line Voltage and Frequency
Over-Temperature protection
Complete with AC test cord (standard North American 3-prong plug)

Alte produse EXTECH

EXTECH ET10 TESTER RECEPTACOL GFCI

• Works with GFCI circuits
• Tests for faulty wiring in 3-wire receptacles: Correct, Open Ground, Open Neutral, Open Hot, Hot/Ground Reverse, Hot/Neutral Reverse
• Lights indicate circuit condition
• Standard North American 3-prong plug

EXTECH LT10 LUXMETRU DE BUZUNAR

• Measures light intensity up to 4000Fc/40000Lux with measuring rate of 1.5 times/second
• Pocket-sized housing with easy one-button operation
• Large, backlit LCD display
• Double-molded side grip
• Tripod mount (tripod not included)
• Complete with 9V battery

EXTECH CT80 TESTER AFCI, GFCI AND AC CIRCUIT ANALYZER

• Selectable loads of 12, 15 and 20 Amps
• Measures loaded and unloaded AC Line Voltage
• Calculates and displays % Voltage Drop and Line Impedance
• Displays Peak Line Voltage and Frequency

EXTECH CO30: CO (CARBON MONOXIDE) MONITOR

• Alternately displays Carbon Monoxide (CO) concentration, Air Temperature, and Relative Humidity readings (cycles approximately every 6 seconds)
• Visible bright tri-colored (green, yellow, red) LED alarm indicator
• Adjustable audible alarm for readings exceeding one of the selected ranges: 25ppm, 30ppm, 35ppm, 50ppm, 100ppm or 200ppm
• ZERO Re-Calibration function
• Manual Temperature and Relative Humidity Compensation (adjustable)
• CO Calibration function in fresh air

EXTECH MA3018 CLESTE DE CURENT CORDON FLEXIBIL 3000A TRUE RMS AC

• Measure AC Current up to 3000A
• True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms
• Flexible 18" (45.7cm) clamp jaw easily wraps around bus bars and cable bundles
• 7.5mm cable diameter fits into tight spaces and around large conductors
• Measures AC Current in three ranges
• 3000 count backlit LCD display

EXTECH SD800 TESTER CO2, UMIDITATE SI TEMPERATURA CU DATALOGGING

• Checks for Carbon Dioxide (CO2) concentrations
• Maintenance free dual wavelength NDIR (non-dispersive infrared) CO2 sensor
• Triple LCD simultaneously displays CO2 , Temperature and Relative Humidity
• Measurement ranges: CO2 - 0 to 4,000ppm; Temperature - 32 to 122°F (0 to 50°C); Humidity - 10 to 90%RH
• Datalogger stores readings on an SD card in Excel® format for easy transfer to a PC

EXTECH EA80 EASYVIEW™ TESTER CALITATE AER INTERIOR CU DATALOGGING

• Checks for Carbon Dioxide (CO2) concentrations
• Maintenance free dual wavelength NDIR (non-dispersive infrared) CO2
• CO2 measurement range: 0 to 6,000ppm
• Temperature measurement range: -4 to 140°F (-20 to 60°C)
• Humidity measurement range: 10 to 95%RH

EXTECH 480400 TESTER SECVENTA FAZE

• Checks phase sequence and phase status
• Tests up to 600VAC and displays graphical phase orientation on the large LCD
• Double molded durable housing
• Easy to use alligator clips with wide jaws

EXTECH 48VFL11 CONTROLER TEMPERATURA CU IESIRE RELEU

• One relay output
• Dual 4-digit LED displays of process and setpoint values
• User friendly menus and tactile keypad for easy programming
• One-touch autotuning for quick setup & precise control
• Fuzzy Logic PID offers intuitive control simulating human control logic

EXTECH MN10 MULTIMETRU DE BUZUNAR

• Manual ranging multimeter with 2000 count display
• Built-in non-contact Voltage Detector for quick detection of live circuits
• AC/DC Voltage measures up to 500V
• Functions include AC/DC Voltage, DC Current, Resistance, and Diode Test
• Test the quality of 9V batteries