Flexible 11" (28cm) clamp jaw easily wraps around bus bars and cable bundles that may be difficult to access with regular clamp meters. The thin 8mm cable diameter easily fits into tight spaces. Includes test leads for multimeter functions measuring Voltage, Resistance, and Capacitance. True RMS and CAT IV rated allows for maximum accuracy and safety for your measurements.

� True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms

� Flexible 11" (28cm) clamp jaw easily wraps around bus bars and cable bundles

� Autoranging AC Current

� Multimeter functions: AC/DC Voltage, Resistance, Capacitance, Diode/Continuity

� 8mm cable diameter fits into tight spaces and around large conductors

� 6000 count LCD display

� Data Hold freezes reading on display

� Over range and Low battery indicator

� Auto power off with disable

� Complete with test leads and two AAA batteries

Alte produse EXTECH

EXTECH MA140 CLESTE DE CURENT TRUE RMS 300A AC

• True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms
• Compact 0.8" (22mm) jaw size accommodates conductors up to 300MCM and allows measurements in tight locations
• Unique Smart Auto Sense feature
• Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals
• Built-in Non-Contact Voltage (NCV) detector for quick detection of live voltage
• Inrush current measurement

EXTECH 40180 GENERATOR DE TON CU SONDA AMPLIFICATOR IDENTIFICARE CIRCUIT

• Insulated inductive probe tip prevents shorting conductors
• Tests include wire trace, continuity test, clear/busy/ringing line test and tip/ring identification
• Alligator clips for non-terminated cables and modular connectors for direct connections to telephone and internet wiring
• Selectable continuous or variable tone generation
• Built-in speaker on probe with sensitivity control

EXTECH 380363 TESTER DIGITAL IZOLATIE REZISTENTA

• 250V, 500V and 1000V Test Voltages
• Measure Insulation Resistance to 10GOhm
• Large LCD display with analog bargraph
• Lo Ohm function for testing connections

EXTECH 407760 INREGISTRATOR SUNET PE USB

• Designed to meet ANSI and IEC 61672 Class 2 standards
• USB interface for easy setup and data download
• 30 to 130dB range
• Datalogging capability up to 129,920 records

EXTECH MG310 TESTER DIGITAL IZOLATIE

• Test Voltages of 250V, 500V, and 1000V
• Measure Insulation Resistance to 5.5GOhm (autoranging)
• AC Voltage measurement from 30 to 600V
• Polarization Index measurement (PI)
• Dielectric Absorption Ratio measurement (DAR)

EXTECH 38387 CLESTE AMPERMETRIC 600A AC CU MULTIMETRU

• Measure AC Current, AC/DC Voltage and Resistance
• 1.25" (33mm) circular jaw opening for large cables (350MCM)
• Large 2000 count LCD display
• Data Hold freezes data in display
• Peak Hold captures in-rush currents
• Audible Continuity beeper

EXTECH DL160 INREGISTRATOR DATALOGGING CU 2 CANALE TENSIUEN SI CURENT AC TRUE RMS

• Simultaneously measure two AC Voltage inputs or two AC Current inputs or one AC Voltage and one AC Current input
• Readings can be downloaded to your PC via the USB interface and analyzed using the included software or exported to a spreadsheet
• LCD indicates time/date, current readings and Min/Max
• Auto Power off and battery check

EXTECH EX355 MULTIMETRU TRUERMS CU 12 FUNCTII

• True RMS for accurate AC measurements
• 6000 count backlit LCD display
• Low Impedance (LoZ) prevents false reading caused by ghost voltages
• Low Pass Filter (LPF) for accurate measurements of variable frequency drive signals

EXTECH CO30: CO (CARBON MONOXIDE) MONITOR

• Alternately displays Carbon Monoxide (CO) concentration, Air Temperature, and Relative Humidity readings (cycles approximately every 6 seconds)
• Visible bright tri-colored (green, yellow, red) LED alarm indicator
• Adjustable audible alarm for readings exceeding one of the selected ranges: 25ppm, 30ppm, 35ppm, 50ppm, 100ppm or 200ppm
• ZERO Re-Calibration function
• Manual Temperature and Relative Humidity Compensation (adjustable)
• CO Calibration function in fresh air

EXTECH CO15: CARBON MONOXIDE (CO) METER

• Dual LCD simultaneously displays Carbon Monoxide (CO) level and maximum CO reading taken from when the meter was powered on
• Long life electrochemical sensor
• Adjustable CO warning level at 25, 30, 35, 45, 50, 70, 100 and 200ppm (alarm is preset to 25ppm)
• Audible alarm when CO level reaches the warning set point level
• Choose from 3 calibration points: 0 (preset), 100, and 500ppm