475044 is a High Capacity Force Gauge with a 5 digit LCD display and peak hold. Exclusive load cell measurement transducer. Over-range, low battery and advanced function indicators. 20kg/44.1 lbs/196.1 Newtons measurement capacity. Selectable fast/slow response times. Basic accuracy of 0.5%. Display reverses to match viewing angle. Complete with tension rod, carrying case and 4 adapters (flathead, cone, chisel and hook for tension), and 6 AA batteries.

Range: 44 lbs, 20kg, 196 Newtons (±0.5% accuracy)
Ideal for a wide variety of applications in the electronics, automotive, chemical, plastics and machinery industries
Reversible display and fast/slow response mode
Exclusive load cell measurement transducer
Overrange, low battery and advanced function indication
Zero Adjust push-button and Peak Hold switch
Complete with hook adaptor for tension/compression adaptors, 5" extension rod, 6 AA batteries and carrying case

Specifications	Range
Range	44lbs, 20kg, 196 Newtons
Basic Accuracy (23°C)	±(0.5%)
Resolution	0.01lbs, 0.01kg, 0.05 Newtons
Overload capacity	30kg
Update Rate	Fast mode 0.2secs; Slow mode 0.6secs
Full scale deflection	2.00mm
Transducer type	Load cell
Dimensions/ Weight	8.5x3.5x1.8" (215x90x45mm)/ 1.4 lbs (650g)

Alte produse EXTECH

EXTECH 380363 TESTER DIGITAL IZOLATIE REZISTENTA

• 250V, 500V and 1000V Test Voltages
• Measure Insulation Resistance to 10GOhm
• Large LCD display with analog bargraph
• Lo Ohm function for testing connections

EXTECH MP530A MULTIPRO® MULTIMETRU PERFORMANT

• High basic DC Voltage accuracy of 0.08%
• Wide AC Voltage bandwidth of 40Hz to 20kHz
• Rugged design with protective holster and water resistant housing
• Backlit 5000 count LCD display for high resolution (0.01mV, 0.1µA, 0.01Ohm, 0.01nF, 0.001Hz)

EXTECH 38220 SURSA DE TENSIUNE 18V/3A

• Constant voltage or current
• Dual backlit LCD displays for voltage and current
• Short circuit protection
• Current limiting

EXTECH HT200 TESTER NIVEL STRS TERMIC (WET BULB GLOBE TEMPERATURE)

• Meter accurately determines the Heat Stress level by factoring a combination of humidity, temperature, air movement, and direct solar radiation
• Uses a capacitance sensor to accurately measure Wet Bulb Globe Temperature (WBGT), Black Globe Temperature (TG), Relative Humidity (%RH), Air Temperature (TA), Wet Bulb (WT) and Dew Point (DEW)
• Black Globe Temperature (TG) monitors the effects of direct solar radiation on an exposed surface
• In/Out function displays the WBGT value with or without direct sun exposure

EXTECH ET40 TESTER CONTINUITATE ROBUST SOLID

• Ideal for checking continuity of non-energized components, fuses, switches, relays, wiring and circuit boards
• 30" (76cm) test lead with alligator clip

EXTECH SD750 DATALOGGER DE PRESIUNE PE 3 CANALE

• Triple LCD simultaneously displays 3 pressure channels
• Up to 5000psi with 4-20mA output
• 4-20mA input with readout in 9 units of measure
• Datalogger date/time stamps and stores readings on an SD card in Excel® format

EXTECH AN320 TERMOMETRU ANEMOMETRU CU ELICE SI MASURA CO2

• 4" (10cm) vane allows for more precise readings on larger size ducts
• Air Velocity, Air Flow, Relative Humidity, Wet Bulb and Dew Point, Carbon Dioxide (CO2)
• Built-in thermistor for air temperature
• Multipoint and timed average calculations

EXTECH HD450 LUXMETRU CU DATALOGGING

• Automatically stores up to 16,000 readings or manually store/recall up to 99 readings
• Large backlit LCD display with 40-segment bar graph
• Wide range to 40,000Fc or 400,000 Lux
• Cosine and color corrected measurements
• Utilizes precision silicon photo diode and spectral response filter
• Peak mode (10mS) captures highest reading

EXTECH EX410 MULTIMETRU PROFESIONAL CU 8 FUNCTII

• Averaging DMM with 8 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Temperature, Diode/Continuity
• Input fuse protection and mis-connection warning
• 20A max Current
• Type K temperature measurements

EXTECH CB10: AC CIRCUIT BREAKER FINDER/RECEPTACLE TESTER

• Quickly locate 110V to 125VAC Circuit Breakers and Fuses
• Variable Sensitivity adjustment to pinpoint correct circuit breaker
• Bright Red and Green LEDs indicates if receptacle is correctly wired or six fault conditions
• Push button GFCI test
• Audible and visual circuit breaker indication