The EX542 offers wireless connectivity to your laptop or PC using a USB receiver with a range comparable to Bluetooth (10m/33 ft.). The EX542 transmits real-time data for monitoring, trending and analysis (using the included software) on one of two available frequencies (433MHz). Now, electrical professionals can monitor and data log readings at a safe distance from hazardous locations. Additionally, it is easier to perform remote tasks such as powering up a device from a control panel that is not nearby. From a time-saving perspective for laptop users, the EX542 permits a user to set up his or her laptop at a centralized location and then sequentially data log readings throughout a site without relocating the laptop. In addition to wireless data logging, the EX542 can log up to 9,999 readings internally and also read voltage, current, resistance, capacitance, frequency (with dual-range sensitivity for electrical and electronic work), duty cycle (dwell), continuity, diode testing (2.8 Volt), and even temperature (using its Type K thermistor bead probe). Complete with double-molded test leads, USB wireless receiver, temperature probe, magnetic hanging strap, 9V battery and carrying case.

Features:

True RMS measurements for accurate AC Voltage and Current measurements
AC/DC Voltage & Current, Resistance, Capacitance, Frequency (electrical/electronic), Temperature, Duty Cycle, Diode/Continuity
Double molded for waterproof (IP67) protection, CAT IV-600V safety rating for industrial applications
Data Acquisition Mode for real time data transmission directly to your PC
1000V input protection on all functions
Dual sensitivity frequency functions
Large triple LCD display
Complete with double molded test leads, magnetic hanging strap, Type K probe, remote receiver with USB cable, PC software (XP only), carrying case, and 9V battery

Alte produse EXTECH

EXTECH 480400 TESTER SECVENTA FAZE

• Checks phase sequence and phase status
• Tests up to 600VAC and displays graphical phase orientation on the large LCD
• Double molded durable housing
• Easy to use alligator clips with wide jaws

EXTECH MA3110 BCLCELSTE CURENT TIP BUCLA FLEXIBILA 3000A TRUE RMS AC

• True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms
• Flexible 11" (28cm) clamp jaw easily wraps around bus bars and cable bundles
• Autoranging AC Current
• Multimeter functions: AC/DC Voltage, Resistance, Capacitance, Diode/Continuity
• 8mm cable diameter fits into tight spaces and around large conductors

EXTECH EX365 MULTIMETRU TRMS CU 10 FUNCTII

• Ideal for Industrial/Commercial appplications
• True RMS for accurate AC measurements
• 6000 count white LED backlit display
• Functions include: NCV, AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Diode Test, Continuity
• Fast 60-segment Analog Bargraph for viewing trends

EXTECH RH520A-220 INREGISTRATOR GRAFIC TEMPERATURA SI UMIDITATE

• Simultaneous numerical and graphical display of Humidity and Temperature readings, plus Time and Date
• Measures Humidity (10 to 95%RH) and Temperature (-20.0°F to 140.0°F) plus calculates Dew Point
• Basic accuracy 3%RH, 1.8°F/1°C
• Large dual graphical LCD displays with adjustable vertical and horizontal TAC resolution
• Internal memory records up to 49,000 data points and can be transferred to a PC via RS-232 serial port for further data analysis
• LCD indicates percentage of memory remaining
• Comes with 220V AC power supply

EXTECH EX205T MULTIMETRU DIGITAL TRUERMS

• True RMS for better accuracy when measuring distorted waveforms
• 2000 count large backlit dual LCD with easy-to read digits
• Low current capability with resolution to 0.1µA
• Input fuse protection
• Max Hold, Data Hold and Auto power off
• Complete with test leads and 9V battery

EXTECH PRC15: CURRENT AND VOLTAGE CALIBRATOR/METER

• Sursa de semnal: iesire in curent 0-24mA (max 1000ohm)
• Masurare curent: 0-50mA
• Sursa de semnal: iesire tensiune 0-20V
• Masurare tensiune: 0-19.99V

EXTECH PRC30: MULTIFUNCTION PROCESS CALIBRATOR

• 0 to 24mA (-25 to 125%) readout
• 24V DC power source for 2-wire current loop
• 0 to 20V DC calibration source
• Source and measure 8 thermocouple type devices (J, K, T, E, C, R, S and N)
• CJC - Cold Junction Compensation function
• Up to five user adjustable calibration presets
• Palm-sized double molded housing and large dot-matrix backlit LCD

EXTECH MO230 UMIDIMETRU DE BUZUNAR

• Displays moisture in wood and other building materials plus Air Temperature and Relative Humidity
• Digital LCD readout with analog bargraph and numerical displays
• Simultaneous digital readout of moisture content plus ambient temperature or humidity with analog bargraph display of moisture, Max moisture values, and programmable wet/dry indication
• Use on wood, paper, wall board, sheet rock, cardboard, plaster, concrete, and mortar

EXTECH EX520 MULTIMETRU INDUSTRIAL REZISTENT TRMS CU 11 FUNCTII

• True RMS DMM with 11 functions and 0.09% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Diode/Continuity
• Dual sensitivity frequency functions (electrical/electronic)
• 1000V input protection on all functions
• 20A max Current

EXTECH EA33 EASYVIEW™ LUXMETRU CU MEMORIE

• Large LCD display with advanced illuminance functions and features
• Wide measurement range to 99,990Fc (999,900 Lux) with resolution of 0.001Fc and 0.01Lux
• Luminous intensity (candela) calculations
• Store and recall up to 50 measurements, includes relative or real time clock stamp
• Ripple function excludes the effect of stray light from the primary light source measurement
• Timed-Hold, Relative in absolute value or % deviation, and Comparator function with high low alarms