Extech EX363 Multimetru TrueRMS cu 11 functii

Cod: Extech EX363


 

Brosura produs PDF, 0.52 Mb

Descriere

HVAC Multimeter with Non-Contact Voltage Detector & Type-K Temperature function

The EX363 is a Compact HVAC True RMS MultiMeter with a Built in Non Contact Voltage Detector. Featuring highly accurate True RMS measurements, LoZ for the prevention of false readings caused by ghost voltages, .5% basic accuracy, a 1000V AC/DC volt range, resistance up to 40MO, continuity beeper with visual alert, smart data hold, peak hold, auto power off with disable, relative mode for capacitance zero and offset adjustment. Additionally, the EX363 excels in HVAC flame rod measurements with a µA function, as well as Type K Temperature measurements from -40 to 742°F (-40 to 394°C) and Frequency and Capacitance measurements. Complete with test leads, 9V battery, holster with tilt stand, general purpose bead wire temperature probe and built-in magnet.

 

Features:

  • Ideal for HVAC applications
  • True RMS for accurate AC measurements
  • 6000 count white LED backlit display
  • Functions include: NCV, AC/DC Voltage, AC/DC micro Current, Resistance, Capacitance, Frequency, Type-K Temperature, Diode Test, Continuity
  • Fast 60-segment Analog Bargraph for viewing trends
  • LoZ prevents false readings caused by ghost voltages
  • Built-in Non-contact AC Voltage Detector (NCV) with Hi/Low ranges and LED indicator
  • Smart Data Hold, Peak Hold, Auto Power off
  • Complete with test leads, 9V battery, holster with tilt stand and built-in magnet, and general purpose bead wire temperature probe
 

Alte produse EXTECH

EXTECH MA410 CLESTE CURENT 400A AC + DETECTOR FARA CONTACT

• AC Current, AC/DC Voltage, Resistance, Frequency, Capacitance, Temperature, Duty Cycle, Diode and Continuity
• Integrated Non-Contact Voltage Detector with LED alert
• Compact size allows measurments in tight locations
• 1.2" (30mm) jaw size for conductors up to 350MCM
• Relative Mode for Capacitance Zero and Offset Adjustment

 

EXTECH BT100: BATTERY CAPACITY TESTER

• Rezistenta: 40 ohm, precizie: ±1%
• Tensiune: 40V, precizie: ±0,1%
• Mod de lucru: mentinere
• Alte functii: inchidere automata, alarme, ZERO
• Memorie: 500 seturi
• Interfete: RS232
• Accesorii incluse: sonde de masura, cablu RS-232, software, clesti crocodil, geanta de transport
• Alimentare: 6 baterii 1.5 Vcc (AA)
• Dimensiuni: 250 x 100 x 45 mm
• Greutate: 500g

 

EXTECH 407736 SONOMETRU CU 2 SCALE

• Provides 1.5dB accuracy
• Meets ANSI and IEC 651 Type 2 standards
• Two measuring ranges: 35 to 90dB (Low) and 75 to 130dB (High)
• Max Hold with reset button
• Built-in calibration check (94dB)

 

EXTECH 382203 SURSA ANALOGICA TRIPLA

• Adjustable Voltage and Current output
• Easy snap terminals for fixed 5V/0.5A and 12V/1A outputs
• Constant Voltage or Current
• Current limiting indicator
• Overload and short circuit protection
• Binding post terminals for variable supply

 

EXTECH RHT50 DATALOGGER DE UMIDITATE-TEMPERATURA-PRESIUNE

• Datalogs up to 10,000 readings with a user programmable sample rate
• USB interface for easy set-up and data download
• Selectable Atmospheric Pressure Units: psi, hPa, kPa, and bar
• Selectable data sampling rate from 1 minute to 18 hours

 

EXTECH PRC10: CURRENT CALIBRATOR/METER

• Sursa de semnal: iesire in curent 0-24mA (max 1000ohm)
• Masurare semnal: 0 -50mA
• Sursa de alimentare: 24Vcc pentru alimentare in bucla de curent
• Precizie: 0.01% ±1 digit
• Temperatura operare: 5ºC...40ºC

 

EXTECH CO30: CO (CARBON MONOXIDE) MONITOR

• Alternately displays Carbon Monoxide (CO) concentration, Air Temperature, and Relative Humidity readings (cycles approximately every 6 seconds)
• Visible bright tri-colored (green, yellow, red) LED alarm indicator
• Adjustable audible alarm for readings exceeding one of the selected ranges: 25ppm, 30ppm, 35ppm, 50ppm, 100ppm or 200ppm
• ZERO Re-Calibration function
• Manual Temperature and Relative Humidity Compensation (adjustable)
• CO Calibration function in fresh air

 

EXTECH LCR200 RLC-METRU PORTABIL

• Measures Inductance, Capacitance, and Resistance with secondary parameter Q (Quality), D (Dissipation), R (Resistance), P (Phase), ESR (Equivalent Series Resistance)
• Simultaneous 20,000/2,000 count backlit display of the primary parameter (L, C or R) with the secondary parameter
• Auto Select measurement function with 1kHz default test frequency
• Five test frequencies
• Set Hi/Lo limits using absolute values or percentage limits

 

EXTECH 38387 CLESTE AMPERMETRIC 600A AC CU MULTIMETRU

• Measure AC Current, AC/DC Voltage and Resistance
• 1.25" (33mm) circular jaw opening for large cables (350MCM)
• Large 2000 count LCD display
• Data Hold freezes data in display
• Peak Hold captures in-rush currents
• Audible Continuity beeper

 

EXTECH EA80 EASYVIEW™ TESTER CALITATE AER INTERIOR CU DATALOGGING

• Checks for Carbon Dioxide (CO2) concentrations
• Maintenance free dual wavelength NDIR (non-dispersive infrared) CO2
• CO2 measurement range: 0 to 6,000ppm
• Temperature measurement range: -4 to 140°F (-20 to 60°C)
• Humidity measurement range: 10 to 95%RH