475040 is a Digital Force Gauge with a 5 digit LCD display and peak hold. Exclusive load cell measurement transducer. Over range, low battery and advanced function indicator. 5kg/176oz/49 Newtons measurement capacity. Basic accuracy of 0.4-percent.

Complete with tension rod, carrying case and 4 adapters (flathead, cone, chisel and hook for tension), and 6 AA batteries.

Range: 176 oz, 5000g, 49 Newtons (±0.4% accuracy)
Ideal for a wide variety of applications in the electronics, automotive, chemical, plastics and machinery industries
Reversible display and fast/slow response mode
Exclusive load cell measurement transducer
Overrange, low battery and advanced function indication
Zero Adjust push-button and Peak Hold switch
Complete with hook adaptor for tension/compression adaptors, 5" extension rod, 6 AA batteries and carrying case

Specifications	Range
Range	176oz, 5000g, 49 Newtons
Basic Accuracy (23°C)	±(0.4%)
Resolution	0.05oz, 1g, 0.01 Newtons
Overload capacity	10kg
Update Rate	Fast mode 0.2secs; Slow mode 0.6secs
Full scale deflection	2.00mm
Transducer type	Load cell
Dimensions/ Weight	8.5x3.5x1.8" (215x90x45mm)/ 1.4 lbs (650g)

Alte produse EXTECH

EXTECH 380580 MICROHMMETRU PORTABIL CU BATERIE

• Four terminal Kelvin measurements
• Over-temperature and over-voltage protection
• 5 ranges with 100µOhm max resolution
• Invalid test indicators prevent inaccurate measurements
• Built-in water resistant case with shoulder strap

EXTECH USB200: USB POWER MONITOR

• Test the output voltage, current, capacity and stability to prolong the charging equipment’s life cycle
• Test the quality of charging cable
• 10 storage bank locations
• Lightweight, ergonomic design with USB-A connector
• Complete with internal battery and USB plug cover for storage

EXTECH PQ3470-30 KIT ANALIZOR DE PUTERE 3 FAZE 3000APQ3470 WITH PQ34-30

• Graphic Phase diagram with 3-Phase system parameters
• 3-phase Voltage or Current Unbalanced Ratio (VUR, AUR) and unbalanced factor
• Capture Transient events (including dip, swell, and outage) with programmable threshold (%)
• Log up to 30,000 reading on a removable SD memory card in Microsoft Excel® format
• Wide sampling rate range (2 seconds to 2 hours)

EXTECH EX205T MULTIMETRU DIGITAL TRUERMS

• True RMS for better accuracy when measuring distorted waveforms
• 2000 count large backlit dual LCD with easy-to read digits
• Low current capability with resolution to 0.1µA
• Input fuse protection
• Max Hold, Data Hold and Auto power off
• Complete with test leads and 9V battery

EXTECH ET10 TESTER RECEPTACOL GFCI

• Works with GFCI circuits
• Tests for faulty wiring in 3-wire receptacles: Correct, Open Ground, Open Neutral, Open Hot, Hot/Ground Reverse, Hot/Neutral Reverse
• Lights indicate circuit condition
• Standard North American 3-prong plug

EXTECH EA31 EASYVIEW™ LUXMETRU

• Compact and rugged design with large display
• Low range model measures to 2,000Fc/ 20,000Lux
• Data Hold and Min/Max readings
• Auto power off

EXTECH 380400 BOXA DECADICA DE REZISTENTE

• Durable construction
• Case may be grounded separately
• 3 binding posts permit isolated substitutions
• 1% Resistance substitution from 1 to 11,111,110O
• Seven decade ranges of resistance
• Values can be set in 1O increments

EXTECH ET40 TESTER CONTINUITATE ROBUST SOLID

• Ideal for checking continuity of non-energized components, fuses, switches, relays, wiring and circuit boards
• 30" (76cm) test lead with alligator clip

EXTECH MA410 CLESTE CURENT 400A AC + DETECTOR FARA CONTACT

• AC Current, AC/DC Voltage, Resistance, Frequency, Capacitance, Temperature, Duty Cycle, Diode and Continuity
• Integrated Non-Contact Voltage Detector with LED alert
• Compact size allows measurments in tight locations
• 1.2" (30mm) jaw size for conductors up to 350MCM
• Relative Mode for Capacitance Zero and Offset Adjustment

EXTECH LCR200 RLC-METRU PORTABIL

• Measures Inductance, Capacitance, and Resistance with secondary parameter Q (Quality), D (Dissipation), R (Resistance), P (Phase), ESR (Equivalent Series Resistance)
• Simultaneous 20,000/2,000 count backlit display of the primary parameter (L, C or R) with the secondary parameter
• Auto Select measurement function with 1kHz default test frequency
• Five test frequencies
• Set Hi/Lo limits using absolute values or percentage limits