Extech SDL900 Gaussmetru camp magnetic AC/DC cu Datalogger

Cod: Extech SDL900


 

Brosura produs PDF, 0.25 Mb

Descriere

Magnetic Field Meter/Datalogger with Automatic Temperature Compensation

The SDL900 is an AC/DC Magnetic Meter and Datalogger with automatic temperature compensation. The SDL900 utilizes Hall effect sensor. This meter features an adjustable data sampling rate from 1 to 3600 seconds. Complete with uniaxial magnetic probe sensor with protective cover, SD memory card, 6 AA batteries and hard carrying case.


Features:

·         Utilizes Hall effect sensor with ATC (Automatic Temperature Compensation)

·         Adjustable data sampling rate: 1 to 3600 seconds

·         Memory stores 99 readings manually

·         Datalogging feature records readings with date and time stamp on an SD card (included) in Excel® format

·         N pole/S pole indicator

·         Zero button for DC measurement

·         Data Hold and Min/Max

·         Auto power off with disable

·         Complete with uniaxial magnetic probe sensor with protective cover, SD memory card, Universal AC adaptor with multi-plugs (US, EU, UK, AUS), 6 AA batteries, and hard carrying case

 

 

Alte produse EXTECH

EXTECH MN15A MINI-MULTIMETRU DIGITAL

• Large easy to read digital display
• AC/DC Voltage, DC Current, Resistance, Continuity, Diode Test and Type K Temperature
• 1.5V and 9V Battery test function
• Complete with 9V battery, general purpose Type K bead wire probe and test leads

 

EXTECH EX230 MINI-MULTIMETRU DIGITAL CU 12 FUNCTII SI TEMPERATURA INFRAROSU

• Built-in IR Thermometer with laser pointer for locating hot spots (6:1 Distance to Target Ratio)
• AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Temperature (Type K + IR), Duty Cycle, Continuity / Diode
• 4000 count large backlit dual LCD with easy-to read digits
• Low current capability measure down to 0.1µA

 

EXTECH 412400: MULTIFUNCTION PROCESS CALIBRATOR

• Source 0 to 24mA with 0.01mA resolution
• Measure 0 to 50mA (0.1mA resolution)
• Select Type K, J, or T thermocouple for precision calibrations in °F/°C or mV
• Output 0 to 1999mV or 0 to 10.00V
• Measure 0 to 19.99V

 

EXTECH SDL500 DATALOGGER HIGROMETRU TERMOMETRU

• Relative Humidity, Temperature, Dew Point, and Wet Bulb measurement
• Adjustable data sampling rate
• Stores 99 readings manually and 20M readings via 2G SD card
• Type K/J Thermocouple input for high temperature measurements
• Large backlit dual LCD display

 

EXTECH EN100 TESTER PARAMETRI MEDIU MULTIFUNTIONAL 11-IN-1

• Built-in sensors measure Air Velocity, Air Flow, Temperature, Humidity, Wet Bulb, Dew Point, Heat Index, Wind Chill, Barometric Pressure, Altitude, and Light
• Field replaceable low friction vane wheel improves air velocity accuracy
• Backlit LCD display (auto off after 5 seconds)
• Data Hold, Auto Power Off, Auto-rotating display depending on function
• Complete with built-in multiparameter sensors, wrist strap, and CR2032 battery

 

EXTECH EA33 EASYVIEW™ LUXMETRU CU MEMORIE

• Large LCD display with advanced illuminance functions and features
• Wide measurement range to 99,990Fc (999,900 Lux) with resolution of 0.001Fc and 0.01Lux
• Luminous intensity (candela) calculations
• Store and recall up to 50 measurements, includes relative or real time clock stamp
• Ripple function excludes the effect of stray light from the primary light source measurement
• Timed-Hold, Relative in absolute value or % deviation, and Comparator function with high low alarms

 

EXTECH CO15: CARBON MONOXIDE (CO) METER

• Dual LCD simultaneously displays Carbon Monoxide (CO) level and maximum CO reading taken from when the meter was powered on
• Long life electrochemical sensor
• Adjustable CO warning level at 25, 30, 35, 45, 50, 70, 100 and 200ppm (alarm is preset to 25ppm)
• Audible alarm when CO level reaches the warning set point level
• Choose from 3 calibration points: 0 (preset), 100, and 500ppm

 

EXTECH HD780 MANOMETRU DIGITAL DIGITAL

• Dual differential inputs for pressure and temperature
• Displays 5 types of pressure units
• For use with R22 and R410A refrigerants
• Standard 1/4 NPT male flare fittings

 

EXTECH EA31 EASYVIEW™ LUXMETRU

• Compact and rugged design with large display
• Low range model measures to 2,000Fc/ 20,000Lux
• Data Hold and Min/Max readings
• Auto power off

 

EXTECH ET40 TESTER CONTINUITATE ROBUST SOLID

• Ideal for checking continuity of non-energized components, fuses, switches, relays, wiring and circuit boards
• 30" (76cm) test lead with alligator clip