Extech MO50 Tester umiditate

• Sensor wavelength range 320 to 390nm
• UV sensor with cosine correction measures irradiance from UVA light sources up to 20.00mW/cm²
• Backlit LCD to view in dimly lit areas
• Zero function
• Data Hold and Min/Max functions

 

• Checks for Carbon Dioxide (CO2) concentrations
• Calculates statistical weighted averages of TWA (8 hour time weighted average) and STEL (15 minute short term exposure limit)
• Maintenance free NDIR (non-dispersive infrared) CO2 sensor

 

• Compact size housing with built-in NTC thermistor, capacitive humidity sensor, and barometric pressure MEMS sensor designed with standard USB connector for easy data downloading to a PC
• 5-digit LCD display with battery life indicator
• User programmable settings: 6 languages, sample rate, start delay time, alarm delay time, high/low alarm range, and security feature
• Status Indication via Red and Green LEDs
• Start button begins continuous datalogging, which continues until memory is full at 48,000 readings (16K for each parameter), or when Stop button is pressed
• Bookmark 8 locations in a data recording log with a press of the Mark button

 

• Datalogging of single and 3-phase/3-wire or 3-phase/4-wire systems (up to 52,428 single phase readings or 17,476 3-phase readings)
• Flexible clamp probes can be used for wrapping around bus bars and wire bundles
• Large backlighting LCD displays up to 35 parameters in one screen
• Clamp-on True RMS power measurements with on-screen Harmonics display
• Simultaneous display of Harmonics and Waveform

 

• Measure White, Red, Yellow, Green, and Blue LED and Standard Lighting in Lux or Foot-Candle (Fc) units
• Manually store/recall up to 99 readings
• 4000 count LCD display
• Cosine and color corrected measurements
• Min/Max Average and Auto Power Off
• Complete with light sensor with protective cover and coiled cable expandable to 59" (1.5m), 9V battery, and hard carrying case

 

• Dual LCD simultaneously displays Carbon Monoxide (CO) level and maximum CO reading taken from when the meter was powered on
• Long life electrochemical sensor
• Adjustable CO warning level at 25, 30, 35, 45, 50, 70, 100 and 200ppm (alarm is preset to 25ppm)
• Audible alarm when CO level reaches the warning set point level
• Choose from 3 calibration points: 0 (preset), 100, and 500ppm

 

• Built-in Non-contact Voltage Detector (from 100 to 600VAC)
• AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Type-K Temperature, Duty Cycle, Continuity / Diode
• Autoranging with manual override
• 4000 count high-contrast LCD display

 

• Meter with Heavy-Duty 8" (20cm) Probe
• Soil moisture content measurement from 0 to 50%
• Easy one-hand operation
• Min/Max records minimum and maximum moisture readings
• Data hold to freeze reading on display
• Water resistant

 

• Features 5000g, 176 oz. and 49 Newtons measurement capacity
• Large dual backlit LCD with reversible display feature to match viewing angle
• Record data on SD card
• Updates reading every 0.2 seconds and sample rate is 1 second to 9 hours
• Integrated load cell measurement transducer

 

• Dual differential inputs for pressure and temperature
• Displays 5 types of pressure units
• For use with R22 and R410A refrigerants
• Standard 1/4 NPT male flare fittings