Extech DT100M Telemetru Laser

Cod: Extech DT100M


 

Brosura produs PDF, 0.29 Mb

Descriere

Laser measurements up to 330ft (100m)

Extech’s DT100M measures distance up to 330ft (100m). It can calculate area and volume and the integrated Pythagorean Theorem allows the user to take indirect measurements. Other features include continuous measurement with Min/Max distance tracking, 20 point memory, addition/subtraction of sequential readings, front or rear edge reference, and a Stakeout function. Large quad backlit LCD display and double molded housing. It also has a handy built-in bubble level and comes with a wrist strap and batteries.

 

·         2" to 330ft (0.05 to 100m) measurement range

·         Automatically calculates Area and Volume

·         Indirect measurement using Pythagorean theorem

·         Continous mode with min/max function

·         Displays Sum (+) / Difference (-) of multiple readings

·         Front or rear edge reference

·         Memory automatically stores 20 data points

·         Stakeout function allows user to accurately mark distances between studs (for wall framing) and fence posts

·         Built-in bubble level

·         Large quad-LCD display with backlit feature

·         Low battery indicator and Auto power off

·         Complete with 2 AAA batteries and wrist strap

 

Alte produse EXTECH

EXTECH MF100 TESTER CAMP MAGNETIC AC/DC GAUSSMETRU TESLAMETRU

• Utilizes Hall effect sensor with ATC (Automatic Temperature Compensation)
• N pole/S pole indicator
• Zero button for DC measurement
• Data Hold and Min/Max
• Auto power off with disable
• Complete with uniaxial magnetic probe sensor and protective cover, 9V battery, and hard carrying case

 

EXTECH EMF510 MULTIMETRU RADIATII ELECTRICE MAGNETICE

• Measure EMF/ELF levels in milliGauss (mG) or microTesla (µT) up to 2000mG (200µT) with two ranges to choose from
• Built-in single axis sensor provides basic accuracy reading of ±5%
• 30 to 300Hz bandwidth
• Backlit display to view in dimly lit areas
• Data Hold and Min/Max functions

 

EXTECH MN35 MINI MULTIMETRU DIGITAL

• Large easy to read digital display
• AC/DC Voltage, DC Current, Resistance, Type K Temperature, Continuity/Diode
• 1.5V and 9V Battery test function
• Convenient mini size with protective rubber holster and tilt stand
• Data Hold locks reading in the display
• Includes protective rubber holster, 9V battery, bead wire Type K temp. probe and test leads

 

EXTECH 380193 RLC-METRU PORTABIL COMPONENTE PASIVE

• Simultaneous 20,000/10,000 count display of the primary parameter (L, C or R)
• Secondary parameter of Q (quality), D (dissipation) or R (resistance)
• Set Hi/Lo limits using absolute values or percentage limits
• Parallel or Series equivalent circuit
• Automatic blown fuse indication
• Built-in test fixture or use external test leads

 

EXTECH CO15: CARBON MONOXIDE (CO) METER

• Dual LCD simultaneously displays Carbon Monoxide (CO) level and maximum CO reading taken from when the meter was powered on
• Long life electrochemical sensor
• Adjustable CO warning level at 25, 30, 35, 45, 50, 70, 100 and 200ppm (alarm is preset to 25ppm)
• Audible alarm when CO level reaches the warning set point level
• Choose from 3 calibration points: 0 (preset), 100, and 500ppm

 

EXTECH EX520 MULTIMETRU INDUSTRIAL REZISTENT TRMS CU 11 FUNCTII

• True RMS DMM with 11 functions and 0.09% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Diode/Continuity
• Dual sensitivity frequency functions (electrical/electronic)
• 1000V input protection on all functions
• 20A max Current

 

BOREOSCOP INSPECTII VIDEO EXTECH BR300

• 8mm diameter camera head with 4 built-in bright LED lamps for dimly lit areas
• Handheld design for quick, easy, on-the-spot viewing in small openings
• Completely submersible in water down to 1 meter for 1 hour
• Non-detachable waterproof 39" (1m) flexible gooseneck cable retains configured shape
• 2.7" (68mm) color TFT LCD monitor for detailed images

 

EXTECH 407736 SONOMETRU CU 2 SCALE

• Provides 1.5dB accuracy
• Meets ANSI and IEC 651 Type 2 standards
• Two measuring ranges: 35 to 90dB (Low) and 75 to 130dB (High)
• Max Hold with reset button
• Built-in calibration check (94dB)

 

EXTECH 38073A MINI-MULTIMETRU ANALOGIC

• Easy to read color coded analog display
• Measure AC/DC Voltage, DC Current, Resistance and Decibel
• 4% full scale basic accuracy
• Battery test on 9V and 1.5V batteries
• Complete with test leads and 1.5V AA battery

 

DINAMOMETRU MASURARE FORTA INALTA 100KG EXTECH 475055

• Ranges: 0.05 to 100kg; 0.05 to 220lbs; 0.2 to 980 Newton
• Basic accuracy 0.5%
• Tension or Compression, Peak hold and Zero functions
• Positive/Reverse display for easy easy readability
• Large LCD with backlight feature