Insufficient lighting can create security risks or result in OSHA crackdowns. The Extech LT300 light meter can determine whether you have adequate illumination to protect workers, students, visitors, patients or attendees of different venues. This handheld instrument measures up to 40,000 Fc (or 400,000 Lux) utilizing a remote light sensor connected via 12 in. coiled cable (expandable to 24 in.). A prominent LCD readout displays a digital calculation and complementary analog bar graph for quick, reliable assessments. Complete with 9V battery, light sensor with protective cover, protective holster, and soft case.

Light Meter Features

� Wide range to 40,000Fc or 400,000 Lux with max resolution to 0.01 Fc/Lux

� Relative mode indicates change in light levels, peak mode captures highest reading

� Remote light sensor on 12" (30.5cm) coiled cable - expandable to 24" (61cm)

� Utilizes precision photo diode and color correction filter

� Large LCD display with analog bargraph

� Backlight for readings in low light levels

� Complete with 9V battery, light sensor with protective cover, protective holster, and soft case

Alte produse EXTECH

EXTECH SD700 DATALOGGER INREGISTRATOR PRESIUNE BAROMETRICA, TEMPERATURA SI UMIDITATE

• Displays Barometric Pressure in 3 units of measure: hPa, mmHg, and inHg
• Triple LCD simultaneously displays Barometric Pressure, Temperature, and Relative Humidity
• Datalogger date/time stamps and stores readings on an SD card in Excel® format for easy transfer to a PC
• Selectable data sampling rate: 5, 10, 30, 60, 120, 300, 600 seconds
• Complete with (6) AAA batteries, SD memory card, Universal AC adaptor, and mounting bracket

EXTECH 407026 LUXMETRU SOLID CU INTERFATA PC

• Simultaneous display of Foot Candles or Lux and lighting type
• Large 1.4" (1999 count) LCD display
• % displays differential from reference point
• "ZERO" Re-Calibration
• Utilizes precision photo diode and color correction filter
• Cosine and color corrected measurements

EXTECH 380193 RLC-METRU PORTABIL COMPONENTE PASIVE

• Simultaneous 20,000/10,000 count display of the primary parameter (L, C or R)
• Secondary parameter of Q (quality), D (dissipation) or R (resistance)
• Set Hi/Lo limits using absolute values or percentage limits
• Parallel or Series equivalent circuit
• Automatic blown fuse indication
• Built-in test fixture or use external test leads

EXTECH ET38 TESTER TENSIUNE SI CONTINUATATE

• Voltage detection range: 12 to 300V AC
• Continuity tester
• LED light indicator
• Includes built-in screwdriver tip, pocket clip, and two button batteries

EXTECH MG310 TESTER DIGITAL IZOLATIE

• Test Voltages of 250V, 500V, and 1000V
• Measure Insulation Resistance to 5.5GOhm (autoranging)
• AC Voltage measurement from 30 to 600V
• Polarization Index measurement (PI)
• Dielectric Absorption Ratio measurement (DAR)

EXTECH USB200: USB POWER MONITOR

• Test the output voltage, current, capacity and stability to prolong the charging equipment’s life cycle
• Test the quality of charging cable
• 10 storage bank locations
• Lightweight, ergonomic design with USB-A connector
• Complete with internal battery and USB plug cover for storage

EXTECH 480400 TESTER SECVENTA FAZE

• Checks phase sequence and phase status
• Tests up to 600VAC and displays graphical phase orientation on the large LCD
• Double molded durable housing
• Easy to use alligator clips with wide jaws

KIT TESTER MULTIFUNCTIONAL EXSTIK 4 IN 1 (CLOR, PH, ORP SI TEMPERATURA) - EXTECH EX900

• Includes CL200 meter, pH and ORP electrodes, reagent tablets, 4 plastic cups, weighted stand, pH buffer pouches, batteries and carrying case
• 4-in-1 Water Quality Meter measures Chlorine, pH, ORP plus Temperature with interchangeable flat surface electrodes (included)
• Flat surface electrodes work in liquids, semi-solids and solids
• Memory stores and recalls 15 readings and saves last calibrated value
• Large 3-1/2 digit (2000 count) Digital display with bargraph

EXTECH CO50: DESKTOP CO (CARBON MONOXIDE) MONITOR

• Simultaneously displays Carbon Monoxide (CO) concentration, Air Temperature, and Relative Humidity readings with date (Year, Month, Day) and time
• Visibly bright LED indicates active monitoring (green) or surpassed CO alarm threshold (red)
• Extra loud audible beeper alarm level meets UL 2013 Standard (>85dB @ 3 meters); default alarm threshold at 30ppm (user adjustable)
• Designed with Electrochemical CO sensor
• Record/Recall Max reading for CO concentration
• CO calibration function in fresh air

EXTECH PRC30: MULTIFUNCTION PROCESS CALIBRATOR

• 0 to 24mA (-25 to 125%) readout
• 24V DC power source for 2-wire current loop
• 0 to 20V DC calibration source
• Source and measure 8 thermocouple type devices (J, K, T, E, C, R, S and N)
• CJC - Cold Junction Compensation function
• Up to five user adjustable calibration presets
• Palm-sized double molded housing and large dot-matrix backlit LCD