This Pocket Moisture Meter from Extech allows you to quickly assess whether wood and other porous materials have endured any water incursion. Simply push the sharply pointed electrode pins into the surface of sheetrock, drywall, wallboard, concrete, mortar, plaster or other building materials and the device will detect moisture levels between 0.2% to 2.4%. Slide the material-selection switch to wood and the handheld meter will determine moisture presence in timber from 6% to 44%. Complete with protective cap, replacement pins, and three CR-2032 button batteries.

Features:

Use on wall board, sheet rock, cardboard, plaster, concrete, and mortar
Replaceable threaded measurement electrode pins
Self-contained, pocket sized meter with belt clip

Alte produse EXTECH

EXTECH EX320 MULTIMETRU CU 8 FUNCTII SI DETECTOR TENSIUNE FARA CONTACT

• Autoranging DMM with 8 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Diode/Continuity
• Built-in non-contact AC voltage detector (NCV) with red LED indicator and audible beeper
• Large-digit 2,000 count LCD display

DINAMOMETRU MASURARE FORTA INALTA 20KG EXTECH 475044

• Range: 44 lbs, 20kg, 196 Newtons (±0.5% accuracy)
• Ideal for a wide variety of applications in the electronics, automotive, chemical, plastics and machinery industries
• Reversible display and fast/slow response mode
• Exclusive load cell measurement transducer

EXTECH 382280 SURSA PROGRAMABILA DE PRECIZIE 200W

• High resolution (1mV and 1mA) user programmable output
• Selectable constant Voltage or Current modes
• 0 to 60 second programmable overload delay timer
• Storage/Recall memory

DINAMOMETRU MASURARE FORTA CU DATALOGGING EXTECH 475040-SD

• Features 5000g, 176 oz. and 49 Newtons measurement capacity
• Large dual backlit LCD with reversible display feature to match viewing angle
• Record data on SD card
• Updates reading every 0.2 seconds and sample rate is 1 second to 9 hours
• Integrated load cell measurement transducer

EXTECH SD800 TESTER CO2, UMIDITATE SI TEMPERATURA CU DATALOGGING

• Checks for Carbon Dioxide (CO2) concentrations
• Maintenance free dual wavelength NDIR (non-dispersive infrared) CO2 sensor
• Triple LCD simultaneously displays CO2 , Temperature and Relative Humidity
• Measurement ranges: CO2 - 0 to 4,000ppm; Temperature - 32 to 122°F (0 to 50°C); Humidity - 10 to 90%RH
• Datalogger stores readings on an SD card in Excel® format for easy transfer to a PC

EXTECH MO280 TESTER UMIDITATE NE-INVAZIV FARA AC

• Non-invasive measurement to monitor moisture in wood and other building materials
• Select from 10 wood types and measurement ranges
• Measurement depth to 0.75" (20mm) below the surface
• LCD displays % moisture of wood or material being tested

EXTECH MO55 TESTER UMIDITATE UMIDOMETRU

• Displays moisture level in wood and building materials such as wall board, sheet rock, cardboard, plaster, concrete, and mortar
• Pinless moisture measurement depth to <1" (25mm)
• Audible Alert - Tone rate beeps faster as the moisture level increases
• Icons display low, medium and high levels of moisture content
• Easy-to-use, compact-sized design

EXTECH EX470 MULTIMETRU PROFESIONAL TRURMS SI TERMOMETRU INFRAROSU

• True RMS DMM with 12 functions and 0.3% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, TypeK & IR Temperature, Diode/Continuity, Duty Cycle
• Built-in non-contact InfraRed Thermometer with 8:1 distance to target ratio with 0.95 fixed emissivity
• Input fuse protection and mis-connection warning
• 20A max Current

TESTER UMIDITATE SOL EXTECH MO750 UMIDOMETRU HIGROMETRU

• Meter with Heavy-Duty 8" (20cm) Probe
• Soil moisture content measurement from 0 to 50%
• Easy one-hand operation
• Min/Max records minimum and maximum moisture readings
• Data hold to freeze reading on display
• Water resistant

EXTECH MN35 MINI MULTIMETRU DIGITAL

• Large easy to read digital display
• AC/DC Voltage, DC Current, Resistance, Type K Temperature, Continuity/Diode
• 1.5V and 9V Battery test function
• Convenient mini size with protective rubber holster and tilt stand
• Data Hold locks reading in the display
• Includes protective rubber holster, 9V battery, bead wire Type K temp. probe and test leads