This Thermometer Calibrator sources and measures 8 thermocouple types: J, K, T, E, C, R, S, and N. Displays output in terms of mV or-Degrees F/-Degrees C based on its built-in thermocouple tables. Five stored calibration values for quick calibrations. Oyster case with "flip-up" display is ideal for handheld or benchtop applications. Complete with 9V rechargeable battery, Type K Thermocouple cable, Copper calibration cable, and 115-Volt AC Adaptor/Charger.

� One model for multiple thermocouple types with precision output displayed as mV or °C/°F

� Microprocessor assures maximum accuracy to 0.15% of reading over wide ranges

� High Accuracy Calibration function simulates precision thermocouple outputs for use in calibrating thermometers, transmitters,controllers or recorders.

� Complete with universal AC adaptor and AU/EU/UK/US plugs

Alte produse EXTECH

EXTECH SD900 DATALOGGER DE CURENT DC PE 3 CANALE

• Triple LCD simultaneously displays three DC Current (mA) channels
• Datalogger date/time stamps and stores readings on an SD card in Excel® format for easy transfer to a PC
• Selectable data sampling rate: 2, 5, 10, 30, 60, 120, 300, 600 seconds or Auto
• Complete with 6 AAA batteries, SD memory card, Universal AC adaptor with multi-plugs (US, EU, UK, AU), 3 input sockets and mounting bracket

EXTECH MO280 TESTER UMIDITATE NE-INVAZIV FARA AC

• Non-invasive measurement to monitor moisture in wood and other building materials
• Select from 10 wood types and measurement ranges
• Measurement depth to 0.75" (20mm) below the surface
• LCD displays % moisture of wood or material being tested

EXTECH CB10: AC CIRCUIT BREAKER FINDER/RECEPTACLE TESTER

• Quickly locate 110V to 125VAC Circuit Breakers and Fuses
• Variable Sensitivity adjustment to pinpoint correct circuit breaker
• Bright Red and Green LEDs indicates if receptacle is correctly wired or six fault conditions
• Push button GFCI test
• Audible and visual circuit breaker indication

EXTECH CO30: CO (CARBON MONOXIDE) MONITOR

• Alternately displays Carbon Monoxide (CO) concentration, Air Temperature, and Relative Humidity readings (cycles approximately every 6 seconds)
• Visible bright tri-colored (green, yellow, red) LED alarm indicator
• Adjustable audible alarm for readings exceeding one of the selected ranges: 25ppm, 30ppm, 35ppm, 50ppm, 100ppm or 200ppm
• ZERO Re-Calibration function
• Manual Temperature and Relative Humidity Compensation (adjustable)
• CO Calibration function in fresh air

EXTECH SD500 DATALOGGER INREGISTRARE DATE UMIDITATE SI TEMEPRATURA

• Dual LCD simultaneously displays Relative Humidity and Temperature readings
• Datalogger stores readings on an SD card in Excel® format for easy transfer to a PC
• Selectable data sampling rate: 5, 10, 30, 60, 120, 300, 600 seconds or Auto
• Complete with six AAA batteries, SD memory card, universal AC Adaptor, and mounting bracket

EXTECH UV510 TESTER LUMINA LUXMETRU UVA

• Sensor wavelength range 320 to 390nm
• UV sensor with cosine correction measures irradiance from UVA light sources up to 20.00mW/cm²
• Backlit LCD to view in dimly lit areas
• Zero function
• Data Hold and Min/Max functions

EXTECH 480826 TESTER CAMP ELECTROMAGNETIC PE TREI AXE

• Three axis (X, Y, Z direction) electromagnetic field measurement
• Ideal for EMF measurements around power lines, electrical appliances and industrial devices
• Wide measuring ranges (3 ranges of µTesla or mGauss)
• Big digit LCD display, Data hold
• Easy to use remote probe
• Complete with sensor with 3ft (930mm) cable, 9V battery, and hard carrying case

EXTECH HD750 MANOMETRU PRESIUNE DIFERENTIAL (5PSI)

• ±5psi range, 11 Selectable units of measure
• Max/Min/Avg recording and Relative time stamp
• Data Hold, Auto power off and Zero function
• Large LCD display with backlighting

EXTECH CO50: DESKTOP CO (CARBON MONOXIDE) MONITOR

• Simultaneously displays Carbon Monoxide (CO) concentration, Air Temperature, and Relative Humidity readings with date (Year, Month, Day) and time
• Visibly bright LED indicates active monitoring (green) or surpassed CO alarm threshold (red)
• Extra loud audible beeper alarm level meets UL 2013 Standard (>85dB @ 3 meters); default alarm threshold at 30ppm (user adjustable)
• Designed with Electrochemical CO sensor
• Record/Recall Max reading for CO concentration
• CO calibration function in fresh air

EXTECH CT20 TESTER CONTINUITATE

• A bright flashing LED and loud pulsating beeper indicate local continuity
• Remote continuity with the use of the remote probe
• Flashing remote probe - two lead, bi-color (red/green) LED probe allows a single user to identify up to three wires or cables at a time
• Lightweight and pocketsized, clips on and hangs from the cable(s) under test without falling off
• Great for Electricians and Helpers, Cable TV and Audio System Installers, Alarm Technicians, Plumbers, HVAC Installers etc.