Extech LT10 Luxmetru de buzunar

• Checks phase sequence and phase status
• Tests up to 600VAC and displays graphical phase orientation on the large LCD
• Double molded durable housing
• Easy to use alligator clips with wide jaws

 

• Simultaneous numerical and graphical display of Humidity and Temperature readings, plus Time and Date
• Measures Humidity (10 to 95%RH) and Temperature (-20.0°F to 140.0°F) plus calculates Dew Point
• Basic accuracy 3%RH, 1.8°F/1°C
• Large dual graphical LCD displays with adjustable vertical and horizontal TAC resolution
• Internal memory records up to 49,000 data points and can be transferred to a PC via RS-232 serial port for further data analysis
• LCD indicates percentage of memory remaining
• Comes with 220V AC power supply

 

• Adjustable Voltage and Current output
• Easy snap terminals for fixed 5V/0.5A and 12V/1A outputs
• Constant Voltage or Current
• Current limiting indicator
• Overload and short circuit protection
• Binding post terminals for variable supply

 

• AC Current, AC/DC Voltage, Resistance, Frequency, Capacitance, Temperature, Duty Cycle, Diode and Continuity
• Integrated Non-Contact Voltage Detector with LED alert
• 1.5" (40mm) jaw size for conductors up to 500MCM
• 6000 count, backlit LCD display

 

• Built-in multiparameter sensors measure Air Velocity, Heat Index, Wet Bulb Globe Temperature (WBGT), Humidity, Ambient Temperature, Dew Point, Wet Bulb, Temperature, and Windchill
• MIn/Max/Average (5sec/10sec/13sec)
• Data Hold, Auto Power Off with disable
• Replaceable Mini impeller (vane)
• Complete with CR2032 battery

 

• Displays moisture level in wood and building materials such as wall board, sheet rock, cardboard, plaster, concrete, and mortar
• Pinless moisture measurement depth to <1" (25mm)
• Audible Alert - Tone rate beeps faster as the moisture level increases
• Icons display low, medium and high levels of moisture content
• Easy-to-use, compact-sized design

 

• 4" (10cm) vane allows for more precise readings on larger size ducts
• Air Velocity, Air Flow, Relative Humidity, Wet Bulb and Dew Point, Carbon Dioxide (CO2)
• Built-in thermistor for air temperature
• Multipoint and timed average calculations

 

• Utilizes Hall effect sensor with ATC (Automatic Temperature Compensation)
• N pole/S pole indicator
• Zero button for DC measurement
• Data Hold and Min/Max
• Auto power off with disable
• Complete with uniaxial magnetic probe sensor and protective cover, 9V battery, and hard carrying case

 

• 0 to 24mA (-25 to 125%) readout
• 24V DC power source for 2-wire current loop
• 0 to 20V DC calibration source
• Source and measure 8 thermocouple type devices (J, K, T, E, C, R, S and N)
• CJC - Cold Junction Compensation function
• Up to five user adjustable calibration presets
• Palm-sized double molded housing and large dot-matrix backlit LCD

 

• Large high contrast 4000 count LCD display
• Non-Contact Voltage detection identifies live circuits
• Built-in Flashlight
• Measures AC/DC Voltage, AC/DC Current and Resistance, Frequency and Duty Cycle
• Diode Test and Continuity Beeper