This Sound Level Meter measures from 35 to 130dB with a 1.5dB accuracy and meets ANSI and IEC Type 2 standards. It features fast/slow response time, A/C Weighting, Max Hold, and analog AC/DC output for connection to an analyzer or recorder. Comes complete with microphone wind screen, 9-Volt battery, and carrying case.

Features:

Provides 1.5dB accuracy
Meets ANSI and IEC 651 Type 2 standards
Two measuring ranges: 35 to 90dB (Low) and 75 to 130dB (High)
Max Hold with reset button
Built-in calibration check (94dB)
Analog AC/DC outputs for connection to an analyzer or recorder
Tripod mount ideal for field use

Alte produse EXTECH

EXTECH CO15: CARBON MONOXIDE (CO) METER

• Dual LCD simultaneously displays Carbon Monoxide (CO) level and maximum CO reading taken from when the meter was powered on
• Long life electrochemical sensor
• Adjustable CO warning level at 25, 30, 35, 45, 50, 70, 100 and 200ppm (alarm is preset to 25ppm)
• Audible alarm when CO level reaches the warning set point level
• Choose from 3 calibration points: 0 (preset), 100, and 500ppm

EXTECH 382280 SURSA PROGRAMABILA DE PRECIZIE 200W

• High resolution (1mV and 1mA) user programmable output
• Selectable constant Voltage or Current modes
• 0 to 60 second programmable overload delay timer
• Storage/Recall memory

EXTECH EX330 MINI-MULTIMETRU CU 12 FUNCTII + NCV

• Autoranging DMM with 12 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Diode/Continuity
• Built-in non-contact AC voltage detector (NCV) with red LED indicator and audible beeper
• Large-digit 4,000 count LCD display
• 10A max Current

EXTECH SDL710 MANOMETRU DIFERENTIAL DE PRESIUNE CU DATALOGGER

• Record/Recall Max/Min readings
• Data Hold and Auto power off with disable
• Large LCD display with backlighting
• Zero function for offset correction or measurement

EXTECH PRC30: MULTIFUNCTION PROCESS CALIBRATOR

• 0 to 24mA (-25 to 125%) readout
• 24V DC power source for 2-wire current loop
• 0 to 20V DC calibration source
• Source and measure 8 thermocouple type devices (J, K, T, E, C, R, S and N)
• CJC - Cold Junction Compensation function
• Up to five user adjustable calibration presets
• Palm-sized double molded housing and large dot-matrix backlit LCD

EXTECH MG310 TESTER DIGITAL IZOLATIE

• Test Voltages of 250V, 500V, and 1000V
• Measure Insulation Resistance to 5.5GOhm (autoranging)
• AC Voltage measurement from 30 to 600V
• Polarization Index measurement (PI)
• Dielectric Absorption Ratio measurement (DAR)

EXTECH EX530 MULTIMETRU DIGITAL PORTABIL INDUSTRIAL

• True RMS DMM with 11 functions and 0.06% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Diode/Continuity
• Dual sensitivity frequency functions (electrical/electronic)
• 1000V input protection on all functions
• 20A max Current

EXTECH PRT200 TESTER SECVENTA FAZA FARA CONTACT

• 75 to 1000VAC input voltage with 45 to 65Hz frequency range
• LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each phase is live
• Beeper sounds intermittently when correct phase is detected and continuously if phase is reversed
• Durable housing with back cover magnet for attachment to an AC distribution panel for easy measurement

EXTECH ET10 TESTER RECEPTACOL GFCI

• Works with GFCI circuits
• Tests for faulty wiring in 3-wire receptacles: Correct, Open Ground, Open Neutral, Open Hot, Hot/Ground Reverse, Hot/Neutral Reverse
• Lights indicate circuit condition
• Standard North American 3-prong plug

EXTECH EX363 MULTIMETRU TRUERMS CU 11 FUNCTII

• Ideal for HVAC applications
• True RMS for accurate AC measurements
• 6000 count white LED backlit display
• Functions include: NCV, AC/DC Voltage, AC/DC micro Current, Resistance, Capacitance, Frequency, Type-K Temperature, Diode Test, Continuity
• Fast 60-segment Analog Bargraph for viewing trends