Extech CO250 Tester portabil calitatea aerului pentru interior

Cod: Extech CO250


 

Brosura produs PDF, 0.18 Mb

Descriere

Measures Carbon Dioxide (CO2)

This Portable Indoor Air Quality CO2 Meter measures Carbon Dioxide (C02), Temperature, Humidity, Dew Point, and Wet Bulb. Checks for Carbon Dioxide (CO2) concentrations and calculates statistical weighted averages of TWA (8 hour time weighted average) and STEL (15 minute short term exposure limit). User programmable audible alarm. Data acquisition software and cable included to record and document CO2, Humidity and Temperature data. Complete with software and cable, 4 AA batteries, and carrying case.

  • Checks for Carbon Dioxide (CO2) concentrations
  • Calculates statistical weighted averages of TWA (8 hour time weighted average) and STEL (15 minute short term exposure limit)
  • Maintenance free NDIR (non-dispersive infrared) CO2 sensor
  • Measurement ranges:
    • CO2: 0 to 5000ppm
    • Temperature: -14 to 140°F (-10 to 60°C)
    • Humidity: 0.0 to 99.9%

Specifications

Range

Resolution

Carbon Dioxide (CO2)

0 to 5,000ppm

1ppm

Temperature

14 to 140°F (-10 to 60°C)

0.1°F/°C

Humidity

0.0 to 99.9%

0.1%

Dimensions/ Weight

7.9x2.7x2.3" (200x70x57mm)/ 6.7 oz. (190g)

 

 

Alte produse EXTECH

EXTECH 382260 SURSA IN COMUTATIE 80W

• Performs like 3 power supplies in one
• 3 selectable ranges: 0 to 16V/0 to 5A; 0 to 27V/0 to 3A; 0 to 36V/0 to 2.2A
• 4-Digit LED displays
• Front/Rear output terminals

 

EXTECH CO30: CO (CARBON MONOXIDE) MONITOR

• Alternately displays Carbon Monoxide (CO) concentration, Air Temperature, and Relative Humidity readings (cycles approximately every 6 seconds)
• Visible bright tri-colored (green, yellow, red) LED alarm indicator
• Adjustable audible alarm for readings exceeding one of the selected ranges: 25ppm, 30ppm, 35ppm, 50ppm, 100ppm or 200ppm
• ZERO Re-Calibration function
• Manual Temperature and Relative Humidity Compensation (adjustable)
• CO Calibration function in fresh air

 

EXTECH ET40 TESTER CONTINUITATE ROBUST SOLID

• Ideal for checking continuity of non-energized components, fuses, switches, relays, wiring and circuit boards
• 30" (76cm) test lead with alligator clip

 

EXTECH LT40 LUXMETRU

• Measure white LED and Standard Lighting in Lux or Foot-Candle (Fc) units
• Built-in sensor with protective cover
• 4000 count LCD display
• Cosine and color corrected measurements
• Min/Max Average and Auto Power Off
• Complete with 2 AAA batteries, and pouch

 

EXTECH MA200 CLESTE AMPERMETRIC 400A AC

• 2000 count LCD display
• High accuracy for Current measurements
• 0.9" (23mm) jaw size accommodates conductors up to 300MCM
• Continuity beeper and Diode test
• Data Hold, Max Hold
• Overload protection for all ranges
• Overrange and low battery indicators
• Autoranging with Auto Power Off
• Complete with test leads, case and two AAA batteries

 

EXTECH 480826 TESTER CAMP ELECTROMAGNETIC PE TREI AXE

• Three axis (X, Y, Z direction) electromagnetic field measurement
• Ideal for EMF measurements around power lines, electrical appliances and industrial devices
• Wide measuring ranges (3 ranges of µTesla or mGauss)
• Big digit LCD display, Data hold
• Easy to use remote probe
• Complete with sensor with 3ft (930mm) cable, 9V battery, and hard carrying case

 

EXTECH EX430 MULTIMETRU PROFESIONAL CU 1 FUNCTII

• True RMS DMM with 11 functions and 0.3% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Diode/Continuity, Duty Cycle
• Input fuse protection and mis-connection warning
• 20A max Current

 

EXTECH HT200 TESTER NIVEL STRS TERMIC (WET BULB GLOBE TEMPERATURE)

• Meter accurately determines the Heat Stress level by factoring a combination of humidity, temperature, air movement, and direct solar radiation
• Uses a capacitance sensor to accurately measure Wet Bulb Globe Temperature (WBGT), Black Globe Temperature (TG), Relative Humidity (%RH), Air Temperature (TA), Wet Bulb (WT) and Dew Point (DEW)
• Black Globe Temperature (TG) monitors the effects of direct solar radiation on an exposed surface
• In/Out function displays the WBGT value with or without direct sun exposure

 

EXTECH 40180 GENERATOR DE TON CU SONDA AMPLIFICATOR IDENTIFICARE CIRCUIT

• Insulated inductive probe tip prevents shorting conductors
• Tests include wire trace, continuity test, clear/busy/ringing line test and tip/ring identification
• Alligator clips for non-terminated cables and modular connectors for direct connections to telephone and internet wiring
• Selectable continuous or variable tone generation
• Built-in speaker on probe with sensitivity control

 

EXTECH MN15A MINI0MULTIMETRU DIGITAL

• Large easy to read digital display
• AC/DC Voltage, DC Current, Resistance, Continuity, Diode Test and Type K Temperature
• 1.5V and 9V Battery test function
• Complete with 9V battery, general purpose Type K bead wire probe and test leads