The Extech Instruments DCP60 is highly efficient, incorporates upgraded SMPS circuitry with small form factor, benefits from an automatic cross-over for CC and CV, has three voltage/current presets, and can be remote controlled. The DCP60 is perfect for solving a variety of loading conditions and applications. DC Power Supplies are used to simulate, power, and test circuits, instruments, solenoids, relays, and motors. The variable DC voltages and currents (0-60 volts and 0-30 amps) conveniently permit the user to match the supply's output to a specific application. For example, if an integrated circuit requires 5 volts or 9 volts power, the supply can be configured to output the necessary signal with high precision. Complete with power cords.

Features:

Designed for Laboratory use but excellent for bench technicians, engineers, and educational facilities
60V/10A output
Maximum current can be limited to 5A using the auxiliary output on the front panel (10A main output is on the back panel)
Three user-defined Voltage and Current presets
Dual action rotary encoder control with push knob for fine and coarse tuning
Remote control for Output VoltageCurrent and On/Off
Complete with power cords

Alte produse EXTECH

EXTECH EX210T MULTIMETRU DIGITAL TRUERMS CU INFRAROSU

• True RMS for better accuracy when measuring distorted waveforms
• Built-in IR Thermometer with 4:1 distance to target ratio and laser pointer
• 2000 count large backlit dual LCD with easy-to read digits
• Low current capability with resolution to 0.1µA
• Input fuse protection

EXTECH 401025 LUXMETRU

• Accurately displays light level in terms of Fc or Lux over three ranges
• Select fast (1 second) or slow (2 seconds) response time
• Analog output of 1mV per count for capturing readings to a recorder

EXTECH HD350 ANEMOMETRU CU TUB PITOT SI MANOMETRU DIFERENTIAL

• Simultaneous display of Pressure, Air Velocity or Air Flow plus Temperature
• ±0.7252psi range
• 5 selectable units of pressure measurement
• Max/Min/Avg recording and Relative time stamp
• Data Hold and Auto power off functions

EXTECH 407736 SONOMETRU CU 2 SCALE

• Provides 1.5dB accuracy
• Meets ANSI and IEC 651 Type 2 standards
• Two measuring ranges: 35 to 90dB (Low) and 75 to 130dB (High)
• Max Hold with reset button
• Built-in calibration check (94dB)

EXTECH EN100 TESTER PARAMETRI MEDIU MULTIFUNTIONAL 11-IN-1

• Built-in sensors measure Air Velocity, Air Flow, Temperature, Humidity, Wet Bulb, Dew Point, Heat Index, Wind Chill, Barometric Pressure, Altitude, and Light
• Field replaceable low friction vane wheel improves air velocity accuracy
• Backlit LCD display (auto off after 5 seconds)
• Data Hold, Auto Power Off, Auto-rotating display depending on function
• Complete with built-in multiparameter sensors, wrist strap, and CR2032 battery

CAMERA INSPECTII VIDEO 30M EXTECH HDV650-30G

• Includes flexible, fiberglass core, 30m waterproof camera probe (spool assembly)
• 25mm camera head (60° FOV, long depth of field) with built-in bright 12 LEDs for illuminating the problem areas
• 5.7" color LCD TFT with high definition 640 x 480 VGA pixel resolution
• Rugged oil/chemical resistant and water/drop proof housing (IP67)
• Non-slip ergonomic handles for ambidextrous use
• SD memory card included to store >15,000 images
• Video recording (up to 4 hours) with Voice annotation

EXTECH PRC15: CURRENT AND VOLTAGE CALIBRATOR/METER

• Sursa de semnal: iesire in curent 0-24mA (max 1000ohm)
• Masurare curent: 0-50mA
• Sursa de semnal: iesire tensiune 0-20V
• Masurare tensiune: 0-19.99V

EXTECH CO100 TESTER CALITATE AER DE BIROU CO2

• Checks for Carbon Dioxide (CO2) concentrations
• Maintenance free NDIR (non-dispersive infrared) CO2 sensor
• Indoor Air Quality displayed in ppm with Good (0 to 800ppm), Normal (800 to 1200ppm), Poor (>1200ppm) indication
• User programmable Visible and Audible CO2 warning alarm

EXTECH 407910 TESTER PRESIUNE DIFERENTIALA MANOMETRU

• ±29psi with 0.02psi resolution
• 8 selectable units of measure
• Zero function for offset measurements
• Data Hold, Auto power off, and Min/Max functions

DINAMOMETRU MASURARE FORTA CU DATALOGGING EXTECH 475040-SD

• Features 5000g, 176 oz. and 49 Newtons measurement capacity
• Large dual backlit LCD with reversible display feature to match viewing angle
• Record data on SD card
• Updates reading every 0.2 seconds and sample rate is 1 second to 9 hours
• Integrated load cell measurement transducer