Extech HT30 Tester nivel stres termic WBGT (Wet Bulb Globe Temperature) Meter

• 8mm diameter camera head with 4 built-in bright LED lamps for dimly lit areas
• Handheld design for quick, easy, on-the-spot viewing in small openings
• Completely submersible in water down to 1 meter for 1 hour
• Non-detachable waterproof 39" (1m) flexible gooseneck cable retains configured shape
• 2.7" (68mm) color TFT LCD monitor for detailed images

 

• True RMS measurements for accurate AC Voltage and Current measurements
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency (electrical/electronic), Temperature, Duty Cycle, Diode/Continuity
• Double molded for waterproof (IP67) protection, CAT IV-600V safety rating for industrial applications
• Data Acquisition Mode for real time data transmission directly to your PC
• 1000V input protection on all functions

 

• Displays moisture level in wood and building materials such as wall board, sheet rock, cardboard, plaster, concrete, and mortar
• Audible Alert - tone rate beeps faster as the moisture level increases
• Icons display low, medium and high levels of moisture content
• Easy-to-use, compact-sized design

 

• Selectable loads of 12, 15 and 20 Amps
• Measures loaded and unloaded AC Line Voltage
• Calculates and displays % Voltage Drop and Line Impedance
• Displays Peak Line Voltage and Frequency

 

• Constant voltage or current
• Dual backlit LCD displays for voltage and current
• Short circuit protection
• Current limiting

 

• Test Voltages of 250V, 500V, and 1000V
• Measure Insulation Resistance to 5.5GOhm (autoranging)
• AC Voltage measurement from 30 to 600V
• Polarization Index measurement (PI)
• Dielectric Absorption Ratio measurement (DAR)

 

• 99 memory locations for preset voltage and frequency output settings
• User-programmable Over Current Protection
• Programmable through the built-in RS-232 interface
• Data acquisition mode captures readings to your PC with a user-programmable sampling rate of 2 to 65,535 seconds
• Complete with AC power cord, RS-232 to USB cable and software

 

• Heat Stress Index measures how hot it feels when humidity is combined with temperature, air movement, and radiant heat
• Black Globe Temperature (TG) monitors the effects of direct solarradiation on an exposed surface
• In/Out Function displays the WBGT value with or without direct sun exposure

 

• Adjustable Voltage and Current output
• Easy snap terminals for fixed 5V/0.5A and 12V/1A outputs
• Constant Voltage or Current
• Current limiting indicator
• Overload and short circuit protection
• Binding post terminals for variable supply

 

• Checks for Carbon Dioxide (CO2) concentrations
• Maintenance free dual wavelength NDIR (non-dispersive infrared) CO2
• CO2 measurement range: 0 to 6,000ppm
• Temperature measurement range: -4 to 140°F (-20 to 60°C)
• Humidity measurement range: 10 to 95%RH