The LCR200 is a passive component LCR meter. Discover the tremendous value with a range of features that help this meter provide the precise measurements you need. See simultaneous 20,000/2,000 count display of the primary parameter on the high contrast backlit display. You can set Hi/Lo limits using absolute values or percentages. Open and Short Zero removes unwanted stray impedances from the measurement. Use the built-in test fixture or external test leads (included). The LCR200 has an Auto Power Off function that can also be disabled and a low battery indicator to alert you when to replace the batteries. Complete with test leads and 9V battery.

� Measures Inductance, Capacitance, and Resistance with secondary parameter Q (Quality), D (Dissipation), R (Resistance), P (Phase), ESR (Equivalent Series Resistance)

� Simultaneous 20,000/2,000 count backlit display of the primary parameter (L, C or R) with the secondary parameter

� Auto Select measurement function with 1kHz default test frequency

� Five test frequencies

� Set Hi/Lo limits using absolute values or percentage limits

� Relative mode function

� Parallel or Series equivalent circuit

� Auto power off, Low battery and overrange indicators

� Built-in test fixture or use external test leads

� Open and Short calibration removes unwanted stray impedances from the measurement

� Complete with test leads and 9V battery

Alte produse EXTECH

EXTECH EX503 MULTIMETRU INDISTRIAL ROBUS SOLID CU 10 FUNCTII

• Averaging DMM with 10 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Duty Cycle, Diode/Continuity
• Dual sensitivity frequency functions (electrical/electronic)
• 1000V input protection on all functions
• 10A max Current

EXTECH CT20 TESTER CONTINUITATE

• A bright flashing LED and loud pulsating beeper indicate local continuity
• Remote continuity with the use of the remote probe
• Flashing remote probe - two lead, bi-color (red/green) LED probe allows a single user to identify up to three wires or cables at a time
• Lightweight and pocketsized, clips on and hangs from the cable(s) under test without falling off
• Great for Electricians and Helpers, Cable TV and Audio System Installers, Alarm Technicians, Plumbers, HVAC Installers etc.

EXTECH MA200 CLESTE AMPERMETRIC 400A AC

• 2000 count LCD display
• High accuracy for Current measurements
• 0.9" (23mm) jaw size accommodates conductors up to 300MCM
• Continuity beeper and Diode test
• Data Hold, Max Hold
• Overload protection for all ranges
• Overrange and low battery indicators
• Autoranging with Auto Power Off
• Complete with test leads, case and two AAA batteries

EXTECH MG320 MEGOHMMETRU CAT IV TESTER IZOLATIE/TRUE RMS

• Measure Insulation Resistance to 20GO
• 5 Test Voltage ranges
• Polarization Index (PI) and Dielectric Absorption Ratio measurements (DAR)
• Low Resistance measurement with Zero function
• Programmable Timer feature sets the duration of test

EXTECH EX542MULTIMETRU DIGITAL PORTABIL CU WIRELESS SI INREGISTRARE DATALOGGER

• True RMS measurements for accurate AC Voltage and Current measurements
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency (electrical/electronic), Temperature, Duty Cycle, Diode/Continuity
• Double molded for waterproof (IP67) protection, CAT IV-600V safety rating for industrial applications
• Data Acquisition Mode for real time data transmission directly to your PC
• 1000V input protection on all functions

EXTECH EX320 MULTIMETRU CU 8 FUNCTII SI DETECTOR TENSIUNE FARA CONTACT

• Autoranging DMM with 8 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Diode/Continuity
• Built-in non-contact AC voltage detector (NCV) with red LED indicator and audible beeper
• Large-digit 2,000 count LCD display

EXTECH 38387 CLESTE AMPERMETRIC 600A AC CU MULTIMETRU

• Measure AC Current, AC/DC Voltage and Resistance
• 1.25" (33mm) circular jaw opening for large cables (350MCM)
• Large 2000 count LCD display
• Data Hold freezes data in display
• Peak Hold captures in-rush currents
• Audible Continuity beeper

EXTECH PD20 TERMO-PEDOMETRU

• Total Step mode displays the total accumulated steps user walked after 7-day storage
• Auto power saving mode when meter detects no movement for 10 minutes
• Includes case with built-in clip to wear on your clothes and designed with lanyard insert hole (lanyard not included) to wear around your neck
• Complete with CR2032 battery and nylon case with window opening for display viewing and belt-clip

EXTECH RH25 PSIHROMETRU INDEX INCALZIRE

• Built-in multiparameter sensor measures Heat Index, Wet Bulb Globe Temperature (WBGT), Humidity, Ambient Temperature, Temperature, Dew Point and Wet Bulb
• User Programmable Heat Index/WBGT alarm
• MIn/Max/Average
• Data Hold, Auto Power Off with disable
• Complete with CR2032 battery

EXTECH MO230 UMIDIMETRU DE BUZUNAR

• Displays moisture in wood and other building materials plus Air Temperature and Relative Humidity
• Digital LCD readout with analog bargraph and numerical displays
• Simultaneous digital readout of moisture content plus ambient temperature or humidity with analog bargraph display of moisture, Max moisture values, and programmable wet/dry indication
• Use on wood, paper, wall board, sheet rock, cardboard, plaster, concrete, and mortar