Clorul este produsul cel mai des folosit pentru dezinfectarea apei. Monitorizarea valorilor clorului este foarte importanta în aplicatii precum piscinele si bazinele cu apa termala, calitatea fructelor si a legumelor, dezinfectarea si verificarea calitatii apei potabile.Prin monitorizarea acestui parametru crucial, este posibila reducerea riscurilor de îmbolnavire.

Extech CL500 este utilizat pentru a masura atat Cl liber cat si Cl total pina la 3.5 ppm cu rezolutie de 0.01ppm.

Metoda utilizata este adaptata din metoda USEPA 330.5 pentru ape reziduale si metoda standard 4500-Cl-G pentru apa potabila.

Portable tester for measuring of both Free and Total Chlorine up to 3.50ppm

The CL500 is a free and total Chlorine meter. This chlorine tester measures up to 3.50ppm with 0.01ppm resolution on its large LCD screen. Complete with Free, Total and Zero Chlorine standard solutions, test bottles with covers, Free and Total Chlorine DPD powder (10pcs), cleaning cloth, 6 AAA batteries, and hard carrying case.

Free and Total Chlorine Meter Features

Large big-digit LCD and splash-proof front panel

Measures Free and Total Chlorine up to 3.50ppm with 0.01ppm resolution

Advanced optical system uses a narrow band LED lamp that provides accurate and repeatable readings

Requires only a 10mL sample size

Independent 2-point calibration for Free and Total Chlorine, Auto Power Off

Battery operated for field and on-site testing

Data Hold and Min/Max record/recall

Complete with Free, Total and Zero Chlorine standard solutions, test bottles with covers, Free and Total Chlorine DPD powder (10pcs), cleaning cloth, six AAA batteries, and hard carrying case

�

Alte produse EXTECH

EXTECH 380803 ANALIZOR PUTERE CU DATALOGGER

• Built-in Datalogger stores up to 1,012 readings (single record/continuous datalogging)
• Four simultaneous displays of Watts, Power Factor or VA, Voltage or Hz, Amps
• True RMS Voltage & Current measurements of sine, square, triangular and distorted wave forms with a crest factor < 5
• Plug device to be tested directly into the Power Analyzer

EXTECH 407736 SONOMETRU CU 2 SCALE

• Provides 1.5dB accuracy
• Meets ANSI and IEC 651 Type 2 standards
• Two measuring ranges: 35 to 90dB (Low) and 75 to 130dB (High)
• Max Hold with reset button
• Built-in calibration check (94dB)

EXTECH EX505 MULTIMETRU DIGITAL INDUSTRIAL REZISTENT CU 11 FUNCTII

• True RMS DMM with 11 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Diode/Continuity
• Dual sensitivity frequency functions (electrical/electronic)
• 1000V input protection on all functions
• 10A max Current

EXTECH 412400: MULTIFUNCTION PROCESS CALIBRATOR

• Source 0 to 24mA with 0.01mA resolution
• Measure 0 to 50mA (0.1mA resolution)
• Select Type K, J, or T thermocouple for precision calibrations in °F/°C or mV
• Output 0 to 1999mV or 0 to 10.00V
• Measure 0 to 19.99V

EXTECH MO25 UMIDIMETRU TIP STILOU

• Easy-to-use one button operation
• Data Hold and Auto power off
• Battery level check on power-up
• Complete with protective cap, built-in pocket clip, and one AAA battery

EXTECH 382270 SURSA DE TENSIUNE CUADRUPLA 4 CANALE

• Two fully adjustable supplies combined with two auxiliary outputs
• Two 0 to 30V/0 to 5A outputs with selectable Constant Voltage and Constant Current modes
• Two auxiliary outputs with fixed current of 3 to 6.5V/3A and 8 to 15V/1A

EXTECH 381676A MULTIMETRU TIP STILOU CU 9 FUNCTII SI DETECTOR TENSIUNE FARA CONTACT

• Auto/Manual ranging pen-style multimeter
• Large 2000 count high contrast LCD display
• Built-in Non-Contact Voltage (NCV) detection with visible and audible alarm
• Data Hold, Range Hold, Maximum Hold, Auto Power Off

EXTECH HD450 LUXMETRU CU DATALOGGING

• Automatically stores up to 16,000 readings or manually store/recall up to 99 readings
• Large backlit LCD display with 40-segment bar graph
• Wide range to 40,000Fc or 400,000 Lux
• Cosine and color corrected measurements
• Utilizes precision silicon photo diode and spectral response filter
• Peak mode (10mS) captures highest reading

EXTECH CT70 TESTER GFCI SI ANALIZOR CIRCUIT AC

• Selectable loads of 12, 15 and 20 Amps
• Measures loaded and unloaded AC Line Voltage
• Calculates and displays % Voltage Drop and Line Impedance
• Displays Peak Line Voltage and Frequency

EXTECH LT10 LUXMETRU DE BUZUNAR

• Measures light intensity up to 4000Fc/40000Lux with measuring rate of 1.5 times/second
• Pocket-sized housing with easy one-button operation
• Large, backlit LCD display
• Double-molded side grip
• Tripod mount (tripod not included)
• Complete with 9V battery